Items where Division is "Faculty of Engineering" and Year is 2013

Iman , Behroyan (2013) Turbulent forced convection of nanofluid in a heated tube: A Computational Fluid Dynamics (CFD) study / Iman Behroyan. Masters thesis, University of Malaya.

A.B.M. Saiful, Islam (2013) Nonlinear dynamic behaviour of fully coupled Spar platform /A.B.M. Saiful Islam. PhD thesis, University of Malaya.

Abdallah Ibrahim, Mohammed Hasaballa (2013) Finite element analysis of left ventricle motion and mechanical properties in three dimensions / Abdallah Ibrahim Mohammed Hasaballa. Masters thesis, University of Malaya.

Abdolhossein, Khalilnejad (2013) Numerical simulation and experimental study of root anchorage /Abdolhossein Khalilnejad. PhD thesis, University of Malaya.

Abdul Halim, Poh Yuen Wu (2013) Development of field deployable fiber bragg grating interrogator / Abdul Halim Poh Yuen Wu. Masters thesis, University of Malaya.

Abu Ismaiel, Ahmed (2013) Task specific ionic liquids mixed palm shell activated carbon as ion selective electrodes for Cd(II) and Hg(II) detection / Ahmed Abu Ismaiel. PhD thesis, University of Malaya.

Adila, Md Hashim (2013) Integrating user requirements and ergonomics in designing a school workshop workstation / Adila Md Hashim. Masters thesis, University of Malaya.

Adira, Ibrahim (2013) Gender identification of children using hidden Markov model based on Mel-frequency cepstral coefficient / Adira Ibrahim. Masters thesis, University of Malaya.

Ahmad Firman, Masudi (2013) Development of construction waste indices in Malaysia / Ahmad Firman Masudi. PhD thesis, University of Malaya.

Ali, Sadollah (2013) Development and applications of metaheuristic algorithms in engineering design and structural optimization / Ali Sadollah. PhD thesis, University of Malaya.

Amin, Kamyar (2013) Effect of nanofluids on heat transfer characteristics of a heat pipe / Amin Kamyar. Masters thesis, Universiti Malaya.

Amir Reza, Akhiani (2013) Product Benchmarking Using DFA and DFD Tools / Amir Reza Akhiani. Masters thesis, University of Malaya.

Ang, Teck Nam (2013) Production of laccase enzyme using rice husk as substrate in fungal solid-state fermentation / Teck Nam, Ang. PhD thesis, University of Malaya.

Arnon, Lerdwongpaisan (2013) Automated tyre sorting system using mitsubishi FX3U PLC controller / Arnon Lerdwongpaisan. Masters thesis, University of Malaya.

Asim Hassan, Ali (2013) Influence of crumb rubber modifier on performance characteristics of stone mastic asphalt /Asim Hassan Ali. Masters thesis, University of Malaya.

Asna, Mohd Zain (2013) Optimization of solidifications/stabilization for petroleum-based waste using blended cement / Asna Mohd Zain. PhD thesis, University of Malaya.

Atefeh, Amindoust (2013) Development of an integrated FIS-DEA method for sustainable supplier selection in manufacturing / Atefeh Amindoust. PhD thesis, University of Malaya.

Azadeh, Ghadimi (2013) Stability and thermal conductivity of low concentration titania nanofluids / Azadeh Ghadimi. PhD thesis, University of Malaya.

Behzad, Rismanchi (2013) Energy management implementation in an office building via peak shaving method / Behzad Rismanchi. PhD thesis, University of Malaya.

Belal Ahmed, Abdelaziz Elsayed (2013) Fuzzy sliding mode control for cart Inverted Pendulum system / Belal Ahmed Abdelaziz Elsayed. Masters thesis, University of Malaya.

Chai, Ai Bao (2013) Swelling of elastomers in biodiesel and the resulting mechanical response under cyclic loading / Chai Ai Bao. PhD thesis, University of Malaya.

Chan, Bee Ting (2013) Fluid-structure simulation of a left ventricle with dilated cardiomyopathy / Chan Bee Ting. Masters thesis, University of Malaya.

Chan, Chung Hung (2013) Optimization and modeling of microwave-assisted extraction of active compounds from cocoa leaves / Chan Chung Hung. PhD thesis, University of Malaya.

Chew, King Vee (2013) Comparison of corrosion of magnesium and aluminium in palm biodiesel / Chew King Vee. Masters thesis, Universiti Malaya.

Edzrol Niza , Mohamad (2013) Analysis of general characteristics of transmission error in helical gears and its effects on gear noise and vibration / Edzrol Niza Mohamad. PhD thesis, University of Malaya.

Eida Nadirah , Roslin (2013) A model for full-blown implementation of lean manufacturing system in Malaysian automative industry / Eida Nadirah Roslin. PhD thesis, University of Malaya.

Farhood, Sarrafzadeh Javadi (2013) Heat transfer and energy efficiency analysis of domestic refrigerator using nanorefrigerant / Farhood Sarrafzadeh Javadi. Masters thesis, University of Malaya.

Farihahusnah, Hussin (2013) Acid activation of bleaching earth for crude palm oil treatment / Farihahusnah Hussin. Masters thesis, University of Malaya.

Fatemeh, Rasooli Haghighi (2013) Earned Value Management System in Manufacturing Industry / Fatemeh Rasooli Haghighi. Masters thesis, University of Malaya.

Fatin Syazana , Jamaludin (2013) High aspect ratio microfilling for MEMS using metal nanopowder / Fatin Syazana Jamaludin. Masters thesis, University of Malaya.

Firdaus, Ghazali (2013) Investigation of electro-coagulation process for the reduction of total suspended solids from palm oil mill effluent / Firdaus Ghazali. Masters thesis, University of Malaya.

Foad, Nasouri (2013) Thermal performance analysis of solar thermal system integrated with phase change material / Foad Nasouri. Masters thesis, University of Malaya.

Hamid, Taheri (2013) Fracture mechanics analysis of geometrically nonlinear thin plates by FEM /Hamid Taheri. Masters thesis, University of Malaya.

Hamid , Nalbandian Abhar (2013) Dynamic analysis of the tower crane / Hamid Nalbandian Abhar. Masters thesis, University of Malaya.

Hanieh, Borhanazad (2013) Techno economic analysis of stand-alone hybrid renewable energy system / Hanieh Borhanazad. Masters thesis, University of Malaya.

Harizam, Mohd Zin (2013) Optimisation of laser cutting parameters of oil palm wood / Harizam Mohd Zin. Masters thesis, University of Malaya.

Hartomo, - (2013) Development of ergonomic-axiomatic design parameters for virtual environment / Hartomo. PhD thesis, University of Malay.

Haryani , Azahari (2013) Reuse of polyethylene scrap as building material for plastic waste minimisation / Haryani Azahari. Masters thesis, University Of Malaya.

Hassanuddin, Ismail (2013) Development of boronized duplex stainless steel mini gear through superplastic deformation / Hassanuddin Ismail. Masters thesis, University of Malaya.

Ho, Kar Wei (2013) Fouling behaviour during ultrafiltration of skim latex / Ho Kar Wei. Masters thesis, University of Malaya.

Hossain, Mohammad Sajid (2013) Optical properties and mathematical model for water based Alumina & Titania nanofluids / Mohammad Sajid Hossain. Masters thesis, University of Malaya.

Houman, Yarmand (2013) Computational simulation of heat transfer enhancement by using nanofluid in a rectangular heated pipe / Houman Yarmand. Masters thesis, University of Malaya.

Hussain, Fayaz (2013) Thermal, economic and environmental analysis of domestic solar water heaters in Malaysia / Fayaz Hussain. Masters thesis, University of Malaya.

Iman, Moazedi (2013) Computational study of thermal energy storage system based on nanoparticle enhanced phase change material / Iman Moazedi. Masters thesis, University of Malaya.

Iskandar, - (2013) Modeling and analysis of impact of sepak takraw ball on the player's head / Iskandar. PhD thesis, University of Malaya.

Karthikeyan, Balasubramaniam (2013) Thermal stress analysis of butt welded joint / Karthikeyan Balasubramaniam. Masters thesis, University of Malaya.

Khoo, Shin Yee (2013) Enhancement of impact force determination with modal transformation method by using integration and data filtering /Khoo Shin Yee. PhD thesis, University of Malaya.

Ku Nurul Edhura , Ku Ahamad (2013) An effective islanding detection method for photovoltaic grid connected inverter / Ku Nurul Edhura Ku Ahamad. Masters thesis, University of Malaya.

Leong, Kin Yuen (2013) Thermal and energy performance of nanofluid operated heat recovery exchanger / Leong Kin Yuen. PhD thesis, University of Malaya.

Leong, Siong Hean (2013) Numerical investigation of top-seat angle connections at elevated temperatures / Leong Siong Hean. Masters thesis, University of Malaya.

Lim, Yu Dian (2013) Synthesis and characterizations of amorphous carbon nanotubes / gold particles hybrid materials / Lim Yu Dian. Masters thesis, University of Malaya.

Liza, Ferina (2013) Optimization of aqueous Remazol Brilliant Blue R (RBBR) decolorization by trametes sp. pellets in Fluidized Bed Biological Reactor (FBBR) / Liza Ferina. Masters thesis, University of Malaya.

Luo, Dong (2013) Assessment of tapered plastic fiber sensors in the applications of structural health monitoring / Luo Dong. PhD thesis, University of Malaya.

Mahak, Fazal (2013) Characterisation of viscoelastic response of swollen elastomers / Mahak Fazal. Masters thesis, University of Malaya.

Masoud, Sarraf (2013) Techno-economic analysis of solar home system (SHS) in Cambodia / Masoud Sarraf. Masters thesis, University of Malaya.

Mazhar, Hussain Abbasi (2013) Sensor-less vector control using adaptive observer scheme for controlling the performance of the induction motor / Mazhar Hussain Abbasi. Masters thesis, University of Malaya.

Mazlan, Shah (2013) Development of cutting tool through superplastic deformation methods on boronized duplex stainless steel / Mazlan Shah. Masters thesis, University of Malaya.

Md. Jakirul , Islam (2013) Prediction technique on the effect of human motion on indoor radio wave propagation / Md. Jakirul Islam. Masters thesis, University of Malaya.

Md. Mofijur , Rahman (2013) Performance analysis of palm, jatropha and moringa biodiesels in a diesel engine / Md. Mofijur Rahman. Masters thesis, University of Malaya.

Mohammad Hossein, Mahdavifard (2013) Effects of molybdenum nanoparticles on the interface between lead-free solder and nickel substrate / Mohammad Hossein Mahdavifard. Masters thesis, University of Malaya.

Mohammad Reza, Hassan (2013) Finite element simulation of creep in swollen Nitril Butadiene Rubber (NBR) pipe under internal pressure / Mohammad Reza Hassan. Masters thesis, University of Malaya.

Mohd Akmal, Mhd Yusoff (2013) Design and development of remote measurement for prime mover using Arduino and FR hope RFM12B / Mohd Akmal Mhd Yusoff. Masters thesis, University of Malaya.

Mohd Fahmi , Azman (2013) Resource allocation based on interference coordination for Multicast-Broadcast Single Frequency Network (MBSFN) / Mohd Fahmi Azman. Masters thesis, University of Malaya.

Mohd Hafiz , Abdul Halim Shah (2013) Estimation of energy saving by nanofluid operated air conditioning system / Mohd Hafiz Abdul Halim Shah. Masters thesis, University of Malaya.

Mohd Hafizan , Md. Isa (2013) Self-consolidating concrete incorporating palm oil fuel ash as a supplementary cementing material / Mohd Hafizan Md. Isa. Masters thesis, University of Malaya.

Mohd Jamil , Abdul Wahab (2013) Strength assessment of structural size Malaysian timbers / Mohd Jamil Abdul Wahab. Masters thesis, University of Malaya.

Mohd Noorshahril, Yaakob (2013) Design and development of automatic NGV natural gas vehicle refuelling robot / Mohd Noorshahril Yaakob. Masters thesis, University of Malaya.

Mohd Sayuti , Ab Karim (2013) Application of nano base lubricants in machining process for performance improvements / Mohd Sayuti Ab Karim. PhD thesis, University of Malaya.

Mohd Zamri , Zainon (2013) Effects of vibration onto the flow structures and dynamics of gas-liquid two-phase flow / Mohd Zamri Zainon. PhD thesis, University of Malaya.

Mohsen, Mesbah (2013) Producing ultra fine grain pure aluminum tubes using tubular channel angular pressing (TCAP) / Mohsen Mesbah. Masters thesis, University of Malaya.

Muhammad , Abdul Rahman (2013) Implementation of permanent magnet synchronous motor drives system suitable for air-conditioner application / Muhammad Abdul Rahman. Masters thesis, University of Malaya.

Muhammad Akmal , Kamarudin (2013) Fabrication and characterization of dye-sensitized solar cells incorporating polymer electrolyte liquid crystal system / Muhammad Akmal Kamarudin. Masters thesis, University of Malaya.

Muhammad Firdaus , Othman (2013) Feasibility study of TiO[2] intermediate coating layer for adhesive strength improvement / Muhammad Firdaus Othman. Masters thesis, University of Malaya.

Muhammad Heikal, Hasan (2013) Analysis of electricity generation and clean coal technology development as greenhouse gas control strategy in Indonesia / Muhammad Heikal Hasan. Masters thesis, University of Malaya.

Muhammad Syamsuzzaman, Shamsuddin (2013) Investigation of the effect of layer thickness and infill material percentage on the performance of low-cost and commercial fused deposition modelling / Muhammad Syamsuzzaman Shamsuddin. Masters thesis, University of Malaya.

Mukhtar A. Kareem, Aljadri (2013) Novel deep eutectic solvents and their application in the liquid-liquid extraction of aromatic compounds / Mukhtar A. Kareem Aljadri. PhD thesis, University of Malaya.

Newsha , Abdollahi Chahkand (2013) Investigation on torsional behaviour of CFRP strengthened square hollow steel section / Newsha Abdollahi Chahkand. Masters thesis, University of Malaya.

Noor Dina , Ghazali (2013) Energy efficiency standards and labels for electric rice cookers in Malaysia / Noor Dina Ghazali. Masters thesis, University of Malaya.

Noor Zafirah , Abu Bakar (2013) Fuel savings and cost reduction of start-stop technology for an internal combustion engine / Noor Zafirah Abu Bakar. Masters thesis, University of Malaya.

Noorsaiyyidah, Darman Singho (2013) Synthesis and characterizations of silver/polymethylmethacrylate nanocomposites via in-situ technique / Noorsaiyyidah Darman Singho. Masters thesis, University of Malaya.

Nor Elleeiana, Mohd Syah (2013) Identification of gait disparity using gait analysis and cyclograms: application for prosthetic knee control / Nor Elleeiana Mohd Syah. Masters thesis, University of Malaya.

Nor Hidayahti , Hasan @ Aminuddin (2013) Analysis of entropy generation in micro-mini channel operated with nanofluids for turbulent flow / Nor Hidayahti Hasan @ Aminuddin. Masters thesis, University of Malaya.

Noraini, Idris (2013) Determination of heliostat normal using MATLAB / Noraini Idris. Masters thesis, University of Malaya.

Norfazila, Mohd Sultan (2013) Synthesis and optical characterization of chitosan capped gold nanoparticles via chemical reduction technique / Norfazila Mohd Sultan. Masters thesis, University of Malaya.

Novita , Sakundarini (2013) Development of multi-objective optimization for high recyclability material selection in product design / Novita Sakundarini. PhD thesis, University of Malaya.

Nur Damia , Mohd Ismail (2013) Preparation of biomineral filler and its application as biopolymer composite filler / Nur Damia Mohd Ismail. Masters thesis, University of Malaya.

Nur Fadzilah, Mohamad Radzi (2013) Collision avoidance algorithm design for UAV base on parametric theorem and circle overlapping method / Nur Fadzilah Mohamad Radzi. Masters thesis, University of Malaya.

Nur Yusrina , Abdullah (2013) Macro-ergonomics and musculoskeletal disorders (MSD) in multinational company / Nur Yusrina Abdullah. Masters thesis, University of Malaya.

Nurul Ataillah , Abdul Rahim (2013) Electrical and thermal performance evaluation of solar Photovoltaic/Thermal (PV/T) air system / Nurul Ataillah Abdul Rahim. Masters thesis, University of Malaya.

Nurul Huda, Mat Tahir (2013) Adaptive resource allocation scheme for uplinks in IEEE 802.16m systems / Nurul Huda Mat Tahir. Masters thesis, University of Malaya.

Nurul Izzah, Abd Rahman (2013) Train drivers mental workload and alertness under simulated conditions based on electroencephalogram signals / Nurul Izzah Abd Rahman. Masters thesis, University of Malaya.

Nurul Zieyana , Mohamed Annuar (2013) Modeling and simulation of metal organic halide vapor phase epitaxy growth chamber reactor / Nurul Zieyana Mohamed Annuar. Masters thesis, University of Malaya.

Odeta , Prosper (2013) Reduction of CO[2] emission in Malaysia transport industry using compressed natural gas as alternative fuel / Odeta Prosper. Masters thesis, University of Malaya.

Omar Riyadh , Khaleel (2013) The effect of aggregate and mineral admixtures on engineering properties of high strength self compacting concrete / Omar Riyadh Khaleel. PhD thesis, University of Malaya.

Omid, Kahbasi (2013) Swelling of elastomers due to simulataneous diffusion of biodiesel and multi-axial large strain / Omid Kahbasi. Masters thesis, University of Malaya.

Omid , Afshar (2013) Thermodynamics performance and heat transfer analysis of parabolic trough collector in solar power plant / Omid Afshar. Masters thesis, University of Malaya.

Onn , Cheen Sean (2013) A computational simulation of heat transfer to turbulent flow separation using nano fluid in a concentric pipe / Onn Cheen Sean. Masters thesis, University of Malaya.

Poon, Chi Tat (2013) Effect of herbal extract on rat bone marrow stromal derived osteoblast growth and differentiation in vitro / Poon Chi Tat. Masters thesis, University of Malaya.

Rad, Sadri (2013) Study on thermophysical properties of fluids containing carbon nanotubes / Rad Sadri. Masters thesis, University of Malaya.

Ramin, Solouki Bonab (2013) Characterization of oil palm empty fruit fiber reinforced PVA / Ramin Solouki Bonab. Masters thesis, Universiti Malaya.

Reza, Mahmoodian (2013) Development of manufacturing techniques for Ti-based functionally graded coatings / Reza Mahmoodian. PhD thesis, University of Malaya.

Rizal, Mohd Razman (2013) Critical parameters of the delivery in Ten Pin bowling / Rizal Mohd Razman. PhD thesis, University of Malaya.

Rodney Petrus, Balandong (2013) Development of a closed loop functional electrical stimulation / Rodney Petrus Balandong. Masters thesis, University of Malaya.

Rosmawati, Mat Jihin (2013) Numerical study of heat transfer performance of suspension of nanofluids in heat exchanger tube / Rosmawati Mat Jihin. Masters thesis, University of Malaya.

Rubentheren, Viyapuri (2013) Structural dynamic characterization of biobased micro aerial vehicles / Rubentheren Viyapuri. Masters thesis, University of Malaya.

S Dalilla, Abd Rahim (2013) Techno-economic analysis of jatropha curcas biodiesel production in Malaysia / S Dalilla Abd Rahim. Masters thesis, University of Malaya.

Sa'adah, Ahmad @ Ahmad Sowi (2013) Role of thermo-physical properties of refrigerant on the thermal performance of a refrigeration system / Sa'adah Ahmad @ Ahmad Sowi. Masters thesis, University of Malaya.

Salman Ahamed Khan , Jagirdar (2013) Convective heat transfer in square and cylindrical porous annulus / Salman Ahamed Khan Jagirdar. PhD thesis, University of Malaya.

Sarfaraz , Kamangar (2013) Finite element analysis of heat transfer in the human head / Sarfaraz Kamangar. Masters thesis, University of Malaya.

Saritha, Paramasivam (2013) Evaluating Level of Service (LOS) for service coverage in Kuala Lumpur transit system using GIS / Saritha Paramasivam. Masters thesis, University of Malaya.

Sharifah Fatmadiana , Wan Muhamad Hatta (2013) Probing technique for energy distribution of positive charges in gate dielectrics and its application to lifetime prediction / Sharifah Fatmadiana Wan Muhamad Hatta. PhD thesis, University of Malaya.

Sim, Hoi Yin (2013) Defect classification in reciprocating compressor using acoustic emission technique / Sim Hoi Yin. Masters thesis, University of Malaya.

Sisavanh, Suyavong (2013) Redesign of stone crushing plant system in Atlantic sand and gravel company / Sisavanh Suyavong. Masters thesis, University of Malaya.

Siti Nur , Hasan (2013) Bioactivity and mechanical behaviour of nanolayer hydroxyapatite coating developed through superplastic embedment of titanium alloy / Siti Nur Hasan. Masters thesis, University of Malaya.

Siti Sara Seera , Mustapa Kamil (2013) Model test on the effects of some root properties on pullout capacity / Siti Sara Seera Mustapa Kamil. Masters thesis, University of Malaya.

Sivabalan , Tanapala (2013) The thermal performance study of biomass field-erected water tube boilers using analytical model / Sivabalan Tanapala. Masters thesis, Universiti Malaya.

Subashini, Supramaniam (2013) Synthesis and characterization of manganese (IV) oxide nanowire via hydrothermal method / Subashini Supramaniam. Masters thesis, University of Malaya.

Sunday, Albert Lawal (2013) Effect of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools / Sunday Albert Lawal. PhD thesis, University of Malaya.

Syafawati, Hasbi (2013) Indoor air quality and climate change impacts on air-conditioning and mechanical ventilation (ACMV) systems in commercial buildings in the tropics / Syafawati Hasbi. Masters thesis, University of Malaya.

Tamalkhani, Syammaun (2013) Effect of oil palm fiber on some physical properties of porous asphalt / Tamalkhani Syammaun. Masters thesis, University of Malaya.

Teh, Seoh Hian (2013) Synthesis and characterization of electrodeposited nanocrystalline ferromagnetic cobalt-iron-platinum alloy films / Teh Seoh Hian. PhD thesis, University of Malaya.

Tsen, Shuk Fun (2013) Determination of structural properties of red seraya plywood using eurocodes compliant testing method / Tsen Shuk Fun. Masters thesis, University of Malaya.

Vicneswaran, Arumugam (2013) Synthesis and characterization of manganese (IV) oxide - multiwalled carbon nano tubes (MWCNT) composite via solid-state technique / Vicneswaran Arumugam. Masters thesis, University of Malaya.

Vinod Khanna Nair, Kuncheekanna (2013) A comparison of occupant thermal comfort between a green building and a conventional building in the Tropics / Vinod Khanna Nair Kuncheekanna. Masters thesis, University of Malaya.

Wong, Kok Hoe (2013) The design and flow simulation of a power-augmented shroud for urban wind turbine system / Wong Kok Hoe. Masters thesis, University of Malaya.

Wong, Siau Dhing (2013) Suspension of concentrated fine particles with novel axial and radial impellers / Wong Siau Dhing. Masters thesis, University of Malaya.

Zulkarnain, Endut (2013) Synthesis and characterization of anodic titania nanotubes for supercapacitor application / Zulkarnain Endut. PhD thesis, University of Malaya.