Items where Division is "Faculty of Engineering" and Year is 2021

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 148.

Abdul Rahman , Mallah (2021) Exploitation of Plasmon resonance phenomenon for the improvement of direct absorption solar collector performance / Abdul Rahman Mallah. PhD thesis, Universiti Malaya.

Abdul Razzak, Kabbara (2021) Study of drag reduction by using guar gum and gum Arabic mixtures / Abdul Razzak Kabbara. Masters thesis, Universiti Malaya.

Abdulrahman, Algarnas (2021) The effects of organizational role and flexible work on workers' health and job satisfaction / Abdulrahman Algarnas. Masters thesis, Universiti Malaya.

Abirami , V. Veeramani (2021) Facemask usage and disposal practices from safety and waste perspective / Abirami V. Veeramani. Masters thesis, Universiti Malaya.

Adrian Chung , Ning Hann (2021) Study of Schottky and Poole-Frenkel conduction mechanism in Fe304-gamma-Fe2O3/SiO2/n-type Si system / Adrian Chung Ning Hann. Masters thesis, Universiti Malaya.

Aeshwini, Singarajan (2021) Assessment of carbon footprint/emissions for solid waste added clay bricks productions / Aeshwini Singarajan. Masters thesis, Universiti Malaya.

Afshin , Aslian (2021) Research on concentrated photovoltaic thermal and daylighting (CPVTD) systems using round and flat optical fibers / Afshin Aslian. PhD thesis, Universiti Malaya.

Ahmad Haziq , Aiman Rosol (2021) Short pulse generations in 1.0 and 1.5 micron regions WITH AuNP and MXene TI3C2TX saturable Absorbers / Ahmad Haziq Aiman Rosol. PhD thesis, Universiti Malaya.

Ahmad Zulkhairi , Zulkefli (2021) Development of artificial neural network models for predicting lipid profile using smartMF electrical parameters / Ahmad Zulkhairi Zulkefli. Masters thesis, Universiti Malaya.

Ahmed , Halilu (2021) In-situ electrochemical generation of superoxide ion for the conversion of CO2 and chlorinated compounds in ionic liquid and nanohybrid-ionic liquid media / Ahmed Halilu. PhD thesis, Universiti Malaya.

Ahmed Shakir , Abdullah Abdullah (2021) Nanosecond and femtosecond fiber lasers using tungsten trioxide, poly (3,4-ethylenedioxythiophene) polystyrene sulfonate and turmeric saturable absorbers / Ahmed Shakir Abdullah Abdullah. PhD thesis, Universiti Malaya.

Alexander Chee , Hon Cheong (2021) A study of copper oxide-zirconia produced by conventional and pressureless two-step sintering process / Alexander Chee Hon Cheong. PhD thesis, Universiti Malaya.

Ali Hassan Abdelrazek , Elsayed (2021) Evaluation of turbulent forced convection heat transfer and pressure drop of nanofluids flow in different closed conduit configurations / Ali Hassan Abdelrazek Elsayed. PhD thesis, Universiti Malaya.

Ali Mohammed , Ali Babalghaith (2021) Application of palm oil clinker as fine aggregate replacement in stone matrix asphalt mix design / Ali Mohammed Ali Babalghaith. PhD thesis, Universiti Malaya.

Aminah , Ahmad (2021) Amplification and generation of short and ultrashort pulse from hafnium bismuth erbium co-doped fiber / Aminah Ahmad. PhD thesis, Universiti Malaya.

Amy Zuria, Abdul Ajid (2021) Identification of ergonomics risk factor and work-related psychosocial using DOSH risk assessment on backpack leaf blower workers / Amy Zuria Abdul Ajid. Masters thesis, Universiti Malaya.

Ananda , Pragasha Nair (2021) Greening animal farm: A case study for a pig farm / Ananda Pragasha Nair. Masters thesis, Universiti Malaya.

Arrul, Jagindar (2021) Heat transfer to nanofluids flow in variable circular and annular passage configuration / Arrul Jagindar. Masters thesis, Universiti Malaya.

Asif , Mustafa (2021) Design of an isolated bidirectional resonant DC-DC converter with wide input voltage range for medium power applications / Asif Mustafa. Masters thesis, Universiti Malaya.

Ayan, Paul (2021) Multivariate assessment of automated massage chair efficacy on skin tissue perfusion and sleep metrics / Ayan Paul. Masters thesis, Universiti Malaya.

Azmi, Osman (2021) Improvement of the vehicle warm-up performance through low thermal inertia exhaust heat recovery unit / Azmi Osman. Masters thesis, Universiti Malaya.

Balqis Erizy , Zainal (2021) Stress analysis of mechanical seal in API 610 pump / Balqis Erizy Zainal. Masters thesis, Universiti Malaya.

Basem Adnan , Al Khatib (2021) Determining the delay factors for reconstructed mega-project’s phases and the associated challenges / Basem Adnan Al Khatib. PhD thesis, Universiti Malaya.

Chan, Yu T'ng (2021) Machine learning-based classification of Covid-19 using chest radiography images / Chan Yu T'ng. Masters thesis, Universiti Malaya.

Chen , Chun Hui (2021) Retinal vessel segmentation in fundus images using deep learning / Chen Chun Hui. Masters thesis, Universiti Malaya.

Chen , Shilei (2021) Operational structural damage identification using de-noised modal feature in machine learning / Chen Shilei. Masters thesis, Universiti Malaya.

Chong , Kai Lun (2021) Development of a multi criteria decision support system using convolutional neural network and jaya algorithm for water resources management / Chong Kai Lun. PhD thesis, Universiti Malaya.

Christopher Clement, Rusli (2021) Flow characteristic investigation of a novel power-augmented water kinetic turbine for energy capturing from river / Christopher Clement Rusli. Masters thesis, Universiti Malaya.

Darshan, Namasivayam (2021) Design and evaluation of a novel hip prosthesis integrated with a truss system / Darshan Namasivayam. Masters thesis, Universiti Malaya.

Deenadayalini , Retnam (2021) Implementation of fuel saving techniques among airliners in Malaysia / Deenadayalini Retnam. Masters thesis, Universiti Malaya.

Dick Chang, Jia Hau (2021) Design of an intelligent car air conditioning louver for efficient cooling of car interior compartment / Dick Chang Jai Hau. Masters thesis, Universiti Malaya.

Duan, Jin (2021) Assessment of mental health of work from home employee due to movement control order / Duan Jin. Masters thesis, Universiti Malaya.

Eko , Deprianto (2021) Pre-collision safety risk assessment using multi-body simulation / Eko Deprianto. Masters thesis, Universiti Malaya.

Emilia, Norazmi (2021) Factor analysis on spur gear failure using computational simulation / Emilia Norazmi. Masters thesis, Universiti Malaya.

Fan, Baoyuan (2021) Design of a finger exoskeleton for hand rehabilitation / Fan Baoyuan. Masters thesis, University of Malaya.

Farina Saffa , Mohamad Samsamnun (2021) Organic and non-organic semiconductor materials for pulsed fiber laser generation in 1.55-micron region / Farina Saffa Mohamad Samsamnun. PhD thesis, Universiti Malaya.

Fong , Mei Yong (2021) The design of manmade water stream and landscape for water conservation and community project development / Fong Mei Yong. Masters thesis, Universiti Malaya.

Goh, Zhi Kee (2021) Chemical health risk assessment at the thermodynamic laboratory, University of Malaya / Goh Zhi Kee. Masters thesis, Universiti Malaya.

Gurbinder , Singh (2021) Effect of heating on bonding characteristics for copper wire bond technology / Gurbinder Singh. PhD thesis, Universiti Malaya.

Hamed , Pourzolfaghar (2021) Catalytic gas-phase hydrodeoxygenation of phenol over silica supported zinc catalysts at atmospheric pressure / Hamed Pourzolfaghar. PhD thesis, Universiti Malaya.

Hasanathul Bashariyah, Kamaludeen (2021) Assessment and mitigation of university student's mental health during COVID-19 / Hasanathul Bashariyah Kamaludeen. Masters thesis, Univesiti Malaya.

Hasbullah, Hashim (2021) Site suitability study for recycling plastic plant / Hasbullah Hashim. Masters thesis, Universiti Malaya.

Hassan , Umair (2021) High gain fabry-perot antenna with broadband low radar cross section and deflected beam radiation for stealth platforms / Hassan Umair. PhD thesis, Universiti Malaya.

Heshalini , Rajagopal @ Ramasamy (2021) Development of quality assessment methods for wood images / Heshalini Rajagopal @ Ramasamy. PhD thesis, Universiti Malaya.

Iman , Mazinani (2021) Experimental and computational studies of fluid structure interaction of tsunami bore on coastal bridges / Iman Mazinani. PhD thesis, Universiti Malaya.

Indran , Kunusilin (2021) Modelling and analysis of performance for biogas fuelled gas engine using MATLAB / Indran Kunusilin. Masters thesis, Univesiti Malaya.

Jannatul , Naeem (2021) Development of functional electrical stimulation system using mechanomyography as muscle state feedback for paraplegics / Jannatul Naeem. PhD thesis, Universiti Malaya.

Jaspreet Kaur, Malkeet Singh (2021) Mitigation of airborne contaminants in Malaysian offices / Jaspreet Kaur Malkeet Singh. Masters thesis, Universiti Malaya.

Jonathan Teo , Kok Chiang (2021) Potential electricity savings analysis from implementing building integrated photovoltaics at an industrial plant / Jonathan Teo Kok Chiang. Masters thesis, Universiti Malaya.

Jotham Ngu , Ong Hu (2021) Hearing loss qualitative assessment among work from home earphone users / Jotham Ngu Ong Hu. Masters thesis, Univesiti Malaya.

Keong, Le-Onn (2021) Analysis of additives for bio-based engine oil for a two stroke marine engine / Keong Le-Onn. Masters thesis, Universiti Malaya.

Khairunisa , Md Nasir (2021) Performance of waterborne intumescent coating with hybrid industrial and biofillers for steel protection / Khairunisa Md Nasir. PhD thesis, Universiti Malaya.

Khan Muhammad , Qureshi (2021) Pyrolysis of palm oil solid waste using helical screw fluidized bed reactor / Khan Muhammad Qureshi. PhD thesis, Universiti Malaya.

Khew , Gabriel Mun Hong (2021) Fuzzy logic control of biohydrogen production using microbial electrolysis cell (MEC) reactor for storage application / Khew Mun Hong, Gabriel. Masters thesis, Universiti Malaya.

Kho, Tuck Sing (2021) Computational fluid dynamics simulation of internal fluid flow: A case of venturi effect / Kho Tuck Sing. Masters thesis, Univesiti Malaya.

Kwong, Chia Jun (2021) Peroxide assisted adsorption for treating palm oil mill effluent using palm shell based activated carbon / Kwong Chia Jun. Masters thesis, Universiti Malaya.

Lai, Chi Yi (2021) Design of low power, high linearity down-conversion CMOS mixer for industrial, scientific and medical applications at 900 MHz / Lai Chi Yi. Masters thesis, Universiti Malaya.

Lim, Bing Yan (2021) Deep learning model for prediction of progressive mild cognitive impairment to Alzheimer's disease using structural MRI / Lim Bing Yan. Masters thesis, Univesiti Malaya.

Lim, Chin Seong (2021) Design and development of a multimodal self adjusting vibration energy harvesting system / Lim Chin Seong. Masters thesis, Univesiti Malaya.

Lim, Li Yin (2021) Assessment and mitigation of ergonomics risk: An industrial practitioner case study of an electronic manufacturing production line / Lim Li Yin. Masters thesis, Univesiti Malaya.

M. , Obaydullah (2021) Strengthening of prestressed concrete beams using combined externally bonded and prestressed near surface mounted technique / M. Obaydullah. PhD thesis, Universiti Malaya.

Maszairisam, Ameruddin (2021) Optimal placement of distributed generation in distribution networks for power loss minimization and voltage profile enhancement / Maszairisam bt Ameruddin. Masters thesis, Universiti Malaya.

Md Haidar, Islam (2021) A PI based coordinated maximum power point tracking controller for grid connected photovoltaic system / Md Haidar Islam. Masters thesis, Universiti Malaya.

Mian, Muhammad Sami (2021) Microstructure and mechanical properties of porous copper and copper brazed with cu-based filler metal / Mian Muhammad Sami. Masters thesis, Universiti Malaya.

Mohamad Faizal , Baharom (2021) Lanthanoids and transition metals saturable absorber film for short pulse fiber laser generation at 1.0 and 1.55 micron Region / Mohamad Faizal Baharom. PhD thesis, Universiti Malaya.

Mohamad Zaid, Mohamad Zaihirain (2021) Design and development of an image-guided vision system for robotics palletizing / Mohamad Zaid Mohamad Zaihirain. Masters thesis, Universiti Malaya.

Mohamed Afifuddeen, Mohamed Nizam (2021) Biomechanical mechanical and clinical analysis on the improvement of prosthetic liner using polyurethane on anterior distal part of the residual limb / Mohamed Afifuddeen Mohamed Nizam. Masters thesis, Universiti Malaya.

Mohammad Bilal, Goolfee (2021) Power system analysis and optimization for BioApps RoMicP® foot prosthesis / Mohammad Bilal Goolfee. Masters thesis, Universiti Malaya.

Mohammad Zahid , Zamaludin (2021) Three-dimensional (3D) reconstruction of computer tomography cardiac images using visualization toolkit (VTK) / Mohammad Zahid Zamaludin. Masters thesis, Universiti Malaya.

Mohd Azham, Mohd Alwi (2021) Study on engine performance and exhaust pollutant using isobutanol - Calophyllum inophyllum biodiesel - diesel ternary blends in a diesel engine / Mohd Azham Mohd Alwi. Masters thesis, Universiti Malaya.

Mohd Hafiz , Jali (2021) Applied evanescent wave on zinc oxide nanorods coated glass surface for sensing applications / Mohd Hafiz Jali. PhD thesis, Universiti Malaya.

Mozafar , Ansari (2021) Development of soft computing prediction model for the influent physicochemical characteristics of sewage treatment plants / Mozafar Ansari. PhD thesis, Universiti Malaya.

Muhamad Nur Irfan, Mohd Adly (2021) Influence of inhibitor on corrosion behaviour of Al-Mg alloy / Muhamad Nur Irfan Mohd Adly. Masters thesis, Universiti Malaya.

Muhamad Sharul Nizam, Awang (2021) Effect of blending plastic pyrolytic oil and waste cooking biodiesel on engine performance, emissions and lubricity of a small diesel engine fuel with palm oil biodiesel (B30) / Muhamad Sharul Nizam Awang. Masters thesis, Universiti Malaya.

Muhammad, Mohd Said (2021) The relationship between musculoskeletal disorders and mental workload among female computer workers at services sector in Shah Alam / Muhammad Mohd Said. Masters thesis, Universiti Malaya.

Muhammad Abdullah Adli, Ahmad Kamal (2021) Investigation of in vivo cardiac chambers composite rendering / Muhammad Abdullah Adli Ahmad Kamal. Masters thesis, Universiti Malaya.

Muhammad Amirul Asri, Ahmad Lukman (2021) Computational fluid dynamics simulation of rotor cooling system in interior permanent magnet motor / Muhammad Amirul Asri Ahmad Lukman. Masters thesis, Universiti Malaya.

Muhammad Fazrin, Abdullah (2021) Design concept of in-pipe hydro system prototype for renewable energy generation: Vertical axis parallel turbines / Muhammad Fazrin Abdullah. Masters thesis, Universiti Malaya.

Muhammad Harith, Hasnul (2021) Dispersion stability of graphene in bio-based lubricant and its effect on tribological properties / Muhammad Harith Hasnul. Masters thesis, Universiti Malaya.

Muhammad Irfan , Asha'ari (2021) Recreation of water-cooled exhaust manifold to improve exhaust gas recirculation / Muhammad Irfan Asha'ari. Masters thesis, Universiti Malaya.

Muhammad Mujtaba , Abbas (2021) Comparative study of nanoparticles and alcoholic fuel additives with optimized synthesis of palm-sesame biodiesel using tribological and internal combustion engine testing / Muhammad Mujtaba Abbas. PhD thesis, Universiti Malaya.

Muhammad Naveed, Akhter (2021) Analysis of photovoltaic panels performance and power output forecasting based on optimized deep learning technique / Muhammad Naveed Akhter. PhD thesis, Universiti Malaya.

Muhammad Zulfattah , Zakaria (2021) Tribology, performance and emissions of a two stroke-cycle engine using bio-based lubricant / Muhammad Zulfattah Zakaria. PhD thesis, Universiti Malaya.

N Rajeswara Rao, Apparow (2021) Effects of new and recycle electrodes on the mechanical properties of shielded metal arc welding (SMAW) / N Rajeswara Rao Apparow. Masters thesis, Universiti Malaya.

Najiebah, Majdi (2021) Accessibility of disabled toilet for wheelchair user in public buildings in Kuala Lumpur / Najiebah Majdi. Masters thesis, Universiti Malaya.

Naveed , Akram (2021) Thermal performance analysis of flat-plate solar collector by using carbon and metal based nanofluids / Naveed Akram. PhD thesis, Universiti Malaya.

Naveen Jayakumar, Vijhay Keerrthi (2021) Strategies in transforming standard hospitals and clinics for COVID-19 treatment / Naveen Jayakumar Vijhay Keerrthi. Masters thesis, Universiti Malaya.

Navid , Aslfattahi (2021) Development of novel phase change material (PCM)-based nanocomposites using emerging nanomaterials for energy storage applications / Navid Aslfattahi. PhD thesis, Universiti Malaya.

Ng, Guan Qun (2021) Analysis of voltage sag severity caused by fault in power system network / Ng Guan Qun. Masters thesis, Universiti Malaya.

Ng , Kelvin (2021) Paper based cell culture: Electrospin-coated paper as natural extracellular matrix inspired biopolymer scaffold / Ng Kelvin. PhD thesis, Universiti Malaya.

Ngam , Kai Sien (2021) Knowledge and attitude of employees towards noise pollution in latex glove manufacturing industry / Ngam Kai Sien. Masters thesis, Universiti Malaya.

Noor Asliza, Ahmad (2021) Analysis of interface pressure for double curves in idiopathic scoliosis patients / Noor Asliza Ahmad. Masters thesis, Universiti Malaya.

Nor Aina, Mohd Jai (2021) Correlating physiological responses of exergaming boxing in different body positions and disability / Nor Aina Mohd Jai. Masters thesis, Universiti Malaya.

Norhani, Md Nadzri (2021) Investigations on wheelchair seating pressure relief system for pressure ulcer prevention among paraplegics / Norhani Md Nadzri. Masters thesis, Universiti Malaya.

Normazlianita, Mohamad Alias (2021) Multi-array sensorised pillowcase as call detection alarm system for in ward tetraplegic patient / Normazlianita Mohamad Alias. Masters thesis, Universiti Malaya.

Nur Amirah , Mohd Zahri (2021) Mechanical and microstructure analysis of copper to copper foam brazing using copper-tin nickel-phosphorus amorphous filler alloys / Nur Amirah Mohd Zahri. PhD thesis, Universiti Malaya.

Nur Farhanah , Zulkipli (2021) Rare-earth oxide materials for q-switched and mode-locked pulse generations / Nur Farhanah Zulkipli. PhD thesis, Universiti Malaya.

Nur Ismah Izzati, Ismail (2021) Study on the relationship between working conditions and self-perceived psychological symptoms of the workforce in Malaysia / Nur Ismah Izzati Ismail. Masters thesis, Universiti Malaya.

Nur Nadirah , Khairu Najhan (2021) Numerical closed-form solutions of skin flap surgeries using 3D face models / Nur Nadirah Khairu Najhan. Masters thesis, Universiti Malaya.

Nur' Adilah, Abdul Nasir (2021) Miscible blend of polyethersulfone/polyimide membrane crosslinked with diamine for hydrogen/carbon dioxide separation / Nur 'Adilah Abdul Nasir. Masters thesis, Universiti Malaya.

Nurizzaty Khairi, Mohamed (2021) Three-dimensional visualization of brain tumor computed tomography images / Nurizzaty Khairi Mohamed. Masters thesis, Universiti Malaya.

Nurshafira, Hazim Chan (2021) An improved clipped sub-histogram equalization technique using optimized local contrast factor for mammogram image analysis / Nurshafira Hazim Chan. Masters thesis, Universiti Malaya.

Nurul Adina, Azman (2021) Design and simulation of hybrid piezo-pyroelectric energy conversion device / Nurul Adina Azman. Masters thesis, Universiti Malaya.

Nurul Farhah, Shamsuddin (2021) Analysis of inflammation, metabolic and clinical markers in predicting fat mass in HIV-positive males using artificial neural network / Nurul Farhah Shamsuddin. Masters thesis, Universiti Malaya.

Omar Saifuddin , Aasimudin (2021) Optimized biodiesel production by using ultrasound assisted transesterification / Omar Saifuddin Aasimudin. Masters thesis, Universiti Malaya.

Pavitra , Kumar (2021) Nitrogen prediction model through new hybrid model using ant colony optimization and Elman neural network / Pavitra Kumar. PhD thesis, Universiti Malaya.

Peyman , Darvish (2021) Compensation for three-coil wireless power transfer for misalignment and efficiency improvement in wireless charging system / Peyman Darvish. Masters thesis, Universiti Malaya.

Piradeepan , Ramachandran (2021) A HIRARC model for safety and risk evaluation at construction site of manmade water streams and wetlands / Piradeepan Ramachandran. Masters thesis, Universiti Malaya.

Poorni, Letchumanan (2021) Greening mosquito coil manufacturing premise using cleaner production strategy / Poorni Letchumanan. Masters thesis, Universiti Malaya.

Pouya , Darvish (2021) Performance evaluation of geopolymer mortar with sustainable palm oil clinker sand using a volume based approach / Pouya Darvish. PhD thesis, Universiti Malaya.

Praimon, N Janagarajan (2021) The effectiveness of electrocoagulation process in latex wastewater treatment in comparison to conventional physical treatment / Praimon N Janagarajan. Masters thesis, Universiti Malaya.

Prasad , Anantha Raj (2021) Inherent safety implementation in office building / Prasad Anantha Raj. Masters thesis, Universiti Malaya.

Pritharshini, Palanisamy (2021) Implementation of mental health improvement programs in private offices: A case study analysis / Pritharshini Palanisamy. Masters thesis, Universiti Malaya.

Puravi, Saminathan (2021) Study of heat transfer and friction loss analysis of flowing fluid in different configuration of closed conduit flow / Puravi Saminathan. Masters thesis, Universiti Malaya.

Puspanathan, Krishnan (2021) Physical and toxicological properties of water treatment residue incorporated clay bricks / Puspanathan Krishnan. Masters thesis, Universiti Malaya.

Rawan , M S Soboh (2021) Q-switched and mode-locked pulse generation with organic dyes based saturable absorber / Rawan M S Soboh. PhD thesis, Universiti Malaya.

Safdar, Khan (2021) Torsional behaviours and crack localization in palm oil clinker concrete / Safdar Khan. Masters thesis, Universiti Malaya.

Saif , Wakeel (2021) Comparison of performance of no-clean and water-soluble fluxes in fine-pitch flip-chip package / Saif Wakeel. Masters thesis, Universiti Malaya.

Sarmad Khubaib, Sarajun Hoda (2021) Creep damage analysis and numerical simulation on oil well steel pipe casing at elevated temperatures / Sarmad Khubaib Sarajun Hoda. Masters thesis, Universiti Malaya.

Satwinder Singh, Narangan Singh (2021) Environmental noise exposure at kernel crush point / Satwinder Singh Narangan Singh. Masters thesis, Universiti Malaya.

Shahrul Azhar, Mustaffa (2021) Compliance on safety behaviour among the lift maintenance worker / Shahrul Azhar Mustaffa. Masters thesis, Universiti Malaya.

Shen, Wenhui (2021) Characteristics study of carbon fibre material for BioApps RoMicP® foot prosthesis / Shen Wenhui. Masters thesis, Universiti Malaya.

Shit , Mun Chuan (2021) A case study of ownership and use of air conditioning in a tropical urban area and its impact on energy consumption / Shit Mun Chuan. Masters thesis, Universiti Malaya.

Siti Nor'Ain, Mokhtar (2021) Experimental analysis of indoor air quality for human comfort in vehicle cabin / Siti Nor' Ain Mokhtar. Masters thesis, Universiti Malaya.

Siti Sarah, Ramani @ Abdullah (2021) Numerical study on the performance and flow characteristic of wind using invelox system / Siti Sarah Ramani @ Abdullah. Masters thesis, Universiti Malaya.

Sriram , Krishnamoorthy (2021) Identification and analysis of human physical exercise postures using computer vision and deep learning / Sriram Krishnamoorthy. Masters thesis, Universiti Malaya.

Suga Ganeshan, Kalaichalvan (2021) Synthesis and evaluation of properties and energy transportation characteristics of gum Arabic and gum guar in heat exchanger / Suga Ganeshan Kalaichalvan. Masters thesis, Universiti Malaya.

Sumra , Yousuf (2021) Alkalinity of cement mortar containing different types of supplementary cementitious materials under accelerated curing conditions / Sumra Yousuf. PhD thesis, Universiti Malaya.

Tan, Kian Hwa (2021) Potential saving and return of investment of solar panel system installation for residential in Malaysia / Tan Kian Hwa. Masters thesis, University of Malaya.

Tan, Wei Ting (2021) Biomechanical analysis of distal stent-graft-induced new entry (SINE) formation in aortic dissection patients / Tan Wei Ting. Masters thesis, Universiti Malaya.

Thenarasu, Pakiyanathan (2021) Heat transfer to nanofluids in closed conduits flow / Thenarasu Pakiyanathan. Masters thesis, Universiti Malaya.

Thineswary Naidu, Genggayanaidu (2021) Cleaner production strategies in steam methane reforming process for hydrogen production / Thineswary Naidu Genggayanaidu. Masters thesis, Universiti Malaya.

Tie, Tzer Sheng (2021) Influence of lightweight expanded perlite and vermiculite on the properties of ground granulated blast furnace slag and fly ash-based mortar / Tie Tzer Sheng. Masters thesis, Universiti Malaya.

Ukashatu , Abubakar (2021) Digital protection of power converters employed in doubly-fed induction generator and induction motor using wavelet transform / Ukashatu Abubakar. PhD thesis, Universiti Malaya.

Uma Magesan, Ulakanathan (2021) Cleaner production approaches in drilling-fluids engineering / Uma Magesan Ulakanathan. Masters thesis, Universiti Malaya.

Umar Ahmad, Abulfathi (2021) Functionalized iron oxide supported on graphene oxide for hyperthermia application / Umar Ahmad Abulfathi. Masters thesis, Universiti Malaya.

Wang, Xiaohui (2021) Government management on food service industry and the intention to practice standard operating measures during COVID-19 / Wang Xiaohui. Masters thesis, Universiti Malaya.

Wang, Yazhuang (2021) Modeling of generative design for wire arc additive manufacyuring (WAAM) / Wang Yazhuang. Masters thesis, Universiti Malaya.

Wu, Danping (2021) Development of three dimensional volumetric rendering in medical image application / Wu Danping. Masters thesis, Universiti Malaya.

Yan, Tianyu (2021) Analysis and forcaset of road safety using big data / Yan Tianyu. Masters thesis, Universiti Malaya.

Yan, Xiangyu (2021) Evaluation of safety and health improvement in population by the implementation strategy of China government during COVID-19 pandemic / Yan Xiangyu. Masters thesis, Universiti Malaya.

Yang , Jianlei (2021) Synthesis of starch-based bioplastics reinforced with lignocellulosic fibers / Yang Jianlei. PhD thesis, Universiti Malaya.

Yu , Li Ming (2021) Dual-band Doherty power amplifier with the improvement of reactance compensation technique for LTE frequency operations / Yu Li Ming. Masters thesis, Universiti Malaya.

Yuharajan, Baskaran (2021) Greening flaring process in oil and gas industries / Yuharajan Baskaran. Masters thesis, Universiti Malaya.

Yung , Chee Liang (2021) Life cycle assessment for the production of refined palm products and palm-based biofuels / Yung Chee Liang. PhD thesis, Universiti Malaya.

Yuvaraj, Ramasamy (2021) Biomechanical determinants of shuttlecock speed in the forehand jumping smash by elite male Malaysian badminton players / Yuvaraj Ramasamy. Masters thesis, Universiti Malaya.

Zhang, Zimu (2021) Blood cells classification using embedded machine learning / Zhang Zimu. Masters thesis, Universiti Malaya.

Zhu , Yue (2021) Octane number prediction for gasoline blends using convolution neural network / Zhu Yue. Masters thesis, Universiti Malaya.

This list was generated on Wed May 22 14:13:01 2024 MYT.