Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | C | G | J | K | L | M | N | O | S | T | U | Y
Number of items at this level: 23.

A

Ali Bashir, Mohamed Bashir (2012) Energy analysis for food industries in Malaysia / Mohamed Bashir Ali Bashir. Masters thesis, University of Malaya.

C

Chew, Kelvin Wai Jin (2015) Effect of zirconium diboride addition on the properties of sintered Y-TZP ceramic / Kelvin Chew Wai Jin. PhD thesis, University of Malaya.

Chin, Chee Lung (2004) Synthesis and characterization of MgCuZn ferrites by co-precipitation and mixed oxide route / Chin Chee Lung. Masters thesis, Universiti Malaya.

Chin, Christopher Kong Ming (2015) Solid state synthesis of forsterite and its mechanical properties / Christopher Chin Kong Ming. PhD thesis, University of Malaya.

G

Gulzar, Mubashir (2017) Tribological study of nanoparticles enrichedbio-based lubricants for engine piston ring–cylinder interaction / Mubashir Gulzar. PhD thesis, University of Malaya.

J

Jafarlou, Davoud Mashhadi (2016) Study on equal channel angular extrusion of circular cross section components and its application for joining dissimilar metals / Davoud Mashhadi Jafarlou. PhD thesis, University of Malaya.

Jusoh, Anuar (2005) Mechanical and morphological properties of polypropylene / natural rubber blending with additives / Anuar bin Jusoh. Undergraduates thesis, University of Malaya.

K

Khan, Tatagar Mohammad Yunus (2017) Effects of injection parameters on performance of diesel engine run on biodiesel from direct transesterification / Tatagar Mohammad Yunus Khan. PhD thesis, University of Malaya.

L

Loo, Mei Sze (2015) Mechanical response of swollen elastomers under short and long-terms cyclic loading conditions / Loo Mei Sze. PhD thesis, University of Malaya.

M

Mahendra, Varman (2004) Cost-efficiency analysis in support of the energy efficiency standard and label for TV sets in Malaysia / Mahendra Varman. Masters thesis, University of Malaya.

Mohammad Sajad , Naghavi Sanjani (2016) Theoretical and experimental investigation on heat pipe solar collector integrated with latent heat thermal energy storage / Mohammad Sajad Naghavi Sanjani. PhD thesis, University of Malaya.

Mohd Nur, Nurhayati (2015) The relationship between work productivity performance and variations in acute responses / Nurhayati binti Mohd Nur. PhD thesis, University of Malaya.

Mohd Zubir, Mohd Nashrul (2015) Production of enhanced stability colloidal system for thermal application / Mohd Nashrul bin Mohd Zubir. PhD thesis, University of Malaya.

N

Naderi, Sadjad (2015) Damage behavior of glass fiber reinforced plastic laminate and bovine-derived hydroxyapatite under low-velocity impact loading / Sadjad Naderi. PhD thesis, University of Malaya.

Nik Pa, Nik Masmiati (2015) Effects of end milling cutting parameters and lubrication modes on residual stress and surface quality in medium carbon steel machining / Nik Masmiati binti Nik Pa. PhD thesis, University of Malaya.

Nor Aliya, Hamizi (2017) Synthesis and characterization of Mn-doped CdSe quantum dots via inverse micelle technique / Nor Aliya binti Hamizi. PhD thesis, University of Malaya.

O

Ong, Hwai Chyuan (2012) Techno-economic analysis of biodiesel production from palm, Jatropha curcas and Calophyllum inophyllum for road transport in Malaysia / Ong Hwai Chyuan. PhD thesis, University of Malaya.

S

Seyed Shirazi, Seyed Farid (2015) Development of calcium silicate-based composites for load-bearing implants / Seyed Farid Seyed Shirazi. PhD thesis, University of Malaya.

T

Teh, Yee Ching (2017) The effects of various processing conditions on the properties of hydroxyapatite / Teh Yee Ching. PhD thesis, University of Malaya.

U

Ubenthiran, Sutharsini (2015) The effect of sintering parameters on the mechanical properties and hydrothermal ageing resistance of Y-TZP Ceramic / Sutharsini Ubenthiran. PhD thesis, University of Malaya.

Y

Yeo, Wei Hong (2017) Prediction of oxide scale growth and thermo-mechanical stress-strain of austenitic steel and nickel-based alloy tubes in ultra-supercritical power plant / Yeo Wei Hong. PhD thesis, University of Malaya.

Yii, Shie Chuong (2007) Modelling and simulation of full car passive suspension systems / Yii Shie Chuong. Undergraduates thesis, University of Malaya.

Yong, Siu Fung (2011) Superplastic boronizing on duplex stainless steel (DSS) using compression method / Yong Siu Fung. Masters thesis, Universiti Malaya.

This list was generated on Sun Aug 20 06:55:51 2017 MYT.