Items where Division is "Faculty of Engineering" and Year is 2016

Afia, Sharmin (2016) Engineering properties of ternary blended geopolymer concrete and role of oxide composition on mortar / Afia Sharmin. Masters thesis, University of Malaya.

Ahasanul, Haque (2016) Circular edge bow-tie nano antenna for energy harvesting systems / Ahasanul Haque. Masters thesis, University of Malaya.

Ahlad, Kumar (2016) Restoration of blurred images using geometric and chebichef moments / Ahlad Kumar. PhD thesis, University of Malaya.

Ahmad Fazlizan, Abdullah (2016) Design and testing of a novel exhaust air energy recovery wind turbine generator / Ahmad Fazlizan Abdullah. PhD thesis, University of Malaya.

Ahmed , Halilu (2016) Magnetic nanoparticle catalyst for hydrogenation of furfural to biofuel / Ahmed Halilu. Masters thesis, University of Malaya.

Aisswarya, Kumaran (2016) Rough surface preparation through chemical etching for super-hydrophobicity / Aisswarya Kumaran. Masters thesis, University of Malaya.

Ali, Karimi (2016) Fabrication of nano composite hydrogels based on polyvinyl alcohol for biomedical applications / Ali Karimi. PhD thesis, University of Malaya.

Ali, Shaukat (2016) Thermal and oxidative degradation of morpholine and blendof piperazine and diethanolamine for CO2 capture / Shaukat Ali. PhD thesis, University of Malaya.

Aliasghar , Niakan (2016) Characteristics and properties of natural hydroxyapatite derived from bovine bone for biomedical applications / Aliasghar Niakan. PhD thesis, University of Malaya.

Alireza, Fallahpour (2016) Development of multi criteria decision making model for supplier selection using gene expression programming / Alireza Fallahpour. PhD thesis, University of Malaya.

Alireza, Shayesteh Fard (2016) A feedforward control for grid-connected inverter under unbalanced and distorted conditions / Alireza Shayesteh Fard. PhD thesis, University of Malaya.

Archina, Buthiyappan (2016) Ultraviolet assisted fenton oxidation hybrid process for treating recalcitrant textile wastewater / Archina Buthiyappan. PhD thesis, University of Malaya.

Arni Munira, Markom (2016) Erbium-zirconia-yttria-aluminum co-doped fiber for amplifier and nanomaterial based ultrafast laser applications / Arni Munira Markom. PhD thesis, University of Malaya.

Asiah, Lokman (2016) Inline mach zender interferometer (IMZI) based sensors for humidity and biochemical concentration measurements / Asiah Lokman. PhD thesis, University of Malaya.

Asmalina, Mohamed Saat (2016) Synthesis and characterization of partially phosphorylated poly (Vinyl Alcohol) – aluminum phosphate (PPVA – AlPO4) nanocomposite / Asmalina Mohamed Saat. PhD thesis, University of Malaya.

Azadeh, Kheirandish (2016) Dynamic modelling of proton exchange membrane fuel cell system for electric bicycle / Azadeh Kheirandish. PhD thesis, University of Malaya.

Bashar Mohammed, Shaher Yafouz (2016) Development of rapid label-free cells discriminator for dengue-infected hepatic cells utilizing dielectrophoresis / Bashar Mohammed Shaher Yafouz. PhD thesis, University of Malaya.

Bilal Mouneir, Saeed Eid (2016) Microgrid multi-distributed energy resources for power management network stability / Bilal Mouneir Saeed Eid. PhD thesis, University of Malaya.

Bizhan, Rahmati (2016) Development of tantalum oxide (ta-o) thin film coating on biomedical ti-6al-4v alloy to enhance mechanical and tribological properties, and biocompatibility / Bizhan Rahmati. PhD thesis, University of Malaya.

Cao, Xiang (2016) An assessment of municipal solid waste management practices in Pulau Ketam Malaysia / Cao Xiang. Masters thesis, University of Malaya.

Chandra, Bhusan Roy (2016) Investigation of tidal stream energy in the straits of Malacca / Chandra Bhushan Roy. Masters thesis, University of Malaya.

Choi, Jane Ru (2016) Development of paper-based biosensor for point-of-care- nucleic acid testing / Choi Jane Ru. PhD thesis, University of Malaya.

Chong , Su Sin (2016) Development of fibre optic sensors for dye concentration measurement / Chong Su Sin. PhD thesis, Universiti Malaya.

Davoud Mashhadi, Jafarlou (2016) Study on equal channel angular extrusion of circular cross section components and its application for joining dissimilar metals / Davoud Mashhadi Jafarlou. PhD thesis, University of Malaya.

Devi, Chandra (2016) Fatigue growth analyses of a part-through crack in a solid bar under combined cyclic tension-torsion loading / Devi Chandra. PhD thesis, University of Malaya.

Ehsan , Zeimaran (2016) A poly (octanediol citrate)/gallium-containing bioglass composite for bone tissue regeneration / Ehsan Zeimaran. PhD thesis, University of Malaya.

Eraj Humayun, Mirza (2016) Development of a scaffold incorporating zinc-oxide nano-particles for cartilage tissue engineering under physiological conditions / Eraj Humayun Mirza. PhD thesis, University of Malaya.

Fauziah, Arshad (2016) Life cycle assessment of the handling and transportation of palm oil, palm olein and palm stearin / Fauziah Arshad. Masters thesis, University of Malaya.

Hadi, - (2016) Fatty acid based phase change materials for thermal storage applications / Hadi. PhD thesis, University of Malaya.

Hamed, Benisi Ghadim (2016) Modelling of the bio-ecological drainage system using infoworks SD / Hamed Benisi Ghadim. PhD thesis, University of Malaya.

Hamed Khajeh, Arzani (2016) Heat transfer enhancement by carbon nanostructure based nanofluids in an annular heat exchanger / Hamed Khajeh Arzani. PhD thesis, University of Malaya.

Hanee Farzana, Hizaddin (2016) Selection of ionic liquids and deep eutectic solvents via quantum chemical methods and liquid-liquid equilibria involved in the extractive denitrogenation of diesel / Hanee Farzana Hizaddin. PhD thesis, University of Malaya.

Herda Yati, Katman (2016) Rutting resistance of SMA mixtures incorporating crumb rubber / Herda Yati Katman. PhD thesis, University of Malaya.

Hoda, Shafaghat (2016) Transformation of phenolic compounds of pyrolysis bio-oil to high-value chemicals by catalytic hydrotreatment / Hoda Shafaghat. PhD thesis, University of Malaya.

Houman , Yarmand (2016) Synthesis, thermo-physical properties and convection heat transfer of carbon based hybrid nanofluids / Houman Yarmand. PhD thesis, University of Malaya.

Houriyeh , Marashi (2016) Enhancing electrical discharge machining performance through employment of titanium nanopowder mixed dielectric and severe plastic deformation of electrode / Houriyeh Marashi. PhD thesis, University of Malaya.

Ibrahem Maher, Abdelrahem Soltan (2016) Development of a new performance criteria for higher wire-electrical discharge machining performance considering the ecological and economical aspects / Ibrahem Maher Abdelrahem Soltan. PhD thesis, University of Malaya.

Iman, Behroyan (2016) Computational modeling on convective flow of nanofluids through a heated pipe / Iman Behroyan. PhD thesis, University of Malaya.

Irwan, Nurdin (2016) Synthesis, characterization, and thermophysical properties of maghemite (γ-Fe2O3) nanofluids with and without magnetic fields effect / Irwan Nurdin. PhD thesis, University of Malaya.

Jassim Kadim, Hmood (2016) Analysis and mitigation of nonlinear fiber impairments in high bit rate all-optical orthogonal frequency division multiplexing system / Jassim Kadim Hmood. PhD thesis, University of Malaya.

Jegathish , Kanadasan (2016) Feasibility study of palm oil clinker as environmentally friendly self-compacting concrete / Jegathish Kanadasan. PhD thesis, University of Malaya.

K. Narrein, Krishnasamy (2016) Numerical study of heat transfer and fluid flow characteristics in microchannel heat sink / K. Narrein Krishnasamy. PhD thesis, University of Malaya.

Kang , Yee Li (2016) Enhancement of microbial fuel cell anode through functionalization of conductive polymer / Kang Yee Li. PhD thesis, University of Malaya.

Kh. Mahfuz , Ud Darain (2016) Strengthening performance of reinforced concrete beam using combined externally bonded and near surface mounted techniques / Kh. Mahfuz Ud Darain. PhD thesis, University of Malaya.

Ku , Pei Xuan (2016) Biomechanical evaluation of postural stance stability / Ku Pei Xuan. PhD thesis, University of Malaya.

Lee, Ching Shya (2016) Study of glycerol electrochemical conversion into added-value compounds / Lee Ching Shya. PhD thesis, University of Malaya.

Lee, Soon Li (2016) Effects of nanoparticle aggregation, particle size and temperature of nanofluids using molecular dynamics simulation / Lee Soon Li. PhD thesis, University of Malaya.

Lubna Ghalib, Abdulkhaleq (2016) A mechanistic model for carbon steel corrosion rate in aqueous carbonated solution of activated mdea and activated dea / Lubna Ghalib Abdulkhaleq. PhD thesis, University of Malaya.

Mahdi , Mansouri (2016) Physiological control of an implantable rotary blood pump / Mahdi Mansouri. PhD thesis, University of Malaya.

Manoj , Tripathi (2016) Microwave pyrolysis of oil palm shell for supercapacitor applications / Manoj Tripathi. PhD thesis, University of Malaya.

Masoud, Asadieraghi (2016) Biomass pyrolysis and catalytic upgrading of pyrolysis vapors for the production of fuels and chemicals / Masoud Asadieraghi. PhD thesis, University of Malaya.

Masoumeh, Moayeri Kashani (2016) Hydrodynamic behaviours of fine sediment in retention structure using particle image velocimetry / Masoumeh Moayeri Kashani. PhD thesis, University of Malaya.

Md Ismail , Hossain (2016) Dyeing process parameter optimization and quality characteristics modeling for viscose blended knitted fabrics / Md Ismail Hossain. PhD thesis, University of Malaya.

Md. Atiqul , Islam (2016) Robust speaker identification based on neural response in clean and noisy conditions / Md. Atiqul Islam. PhD thesis, University of Malaya.

Md. Moshiur, Rahman (2016) Structural hybridization and economical optimization of strengthening systems used for concrete beams / Md. Moshiur Rahman. PhD thesis, University of Malaya.

Mehrtash , Soltani (2016) Evaluating the performance of W-beam guardrail roadside safety barrier systems / Mehrtash Soltani. PhD thesis, University of Malaya.

Mitra Asadi, Eydivand (2016) Three dimensional printing of bone tissue engineering scaffold: Design, structure, and mechanical properties / Mitra Asadi-Eydivand. PhD thesis, University of Malaya.

Moayad Hani Yacoub , Abu Rmilah (2016) An integrated simulation platform for a quadcopter system with fuzzy-tuned PID controllers / Moayad Hani Yacoub Abu Rmilah. Masters thesis, University of Malaya.

Mohamed Hamid , Elsheikh Yousef (2016) Thermoelectric properties of novelmicrostructurally modifiedcosb3skutterudite materials by minor dopants of Mn, Hf, Al, Bi and Yb / Mohamed Hamid Elsheikh Yousef. PhD thesis, University of Malaya.

Mohammad , Pourtousi (2016) CFD modelling and anfis development for the hydrodynamics prediction of bubble column reactor ring sparger / Mohammad Pourtousi. PhD thesis, University of Malaya.

Mohammad Ashraful , Alam (2016) Analysis of particulate matter, carbon emissions and elemental compositions from A diesel engine exhaust fuelled with diesel-biodesel blends / Mohammad Ashraful Alam. Masters thesis, University of Malaya.

Mohammad Mahdi, Aeinehvand (2016) Reversible microballoon system for handling bioanalytical assays on centrifugal microfluidic platform / Mohammad Mahdi Aeinehvand. PhD thesis, University of Malaya.

Mohammad Saeed, Pourtahmasb (2016) Feasibility of using recycled concrete aggregate in dense-graded and gap-graded hot mix asphalts / Mohammad Saeed Pourtahmasb. PhD thesis, University of Malaya.

Mohammad Sajad , Naghavi Sanjani (2016) Theoretical and experimental investigation on heat pipe solar collector integrated with latent heat thermal energy storage / Mohammad Sajad Naghavi Sanjani. PhD thesis, University of Malaya.

Mohammed , A. B. Seyam (2016) Stream flow analysis and modelling using artificial intelligence techniques / Mohammed A. B. Seyam. PhD thesis, University of Malaya.

Mohsen, Akbari (2016) Improving spectrum efficiency on cognitive radio spectrum sensing with enhanced diversity concept / Mohsen Akbari. PhD thesis, University of Malaya.

Mohsin Ali , Tunio (2016) Partial discharge measurement and modelling within an artificial cylindrical-shaped insulation under non-uniform electric field / Mohsin Ali Tunio. PhD thesis, University of Malaya.

Moinuddin, Mohammed Quazi (2016) Development of wear resistant metal matrix composite coatings based on laser surfacing engineering technique / Moinuddin Mohammed Quazi. PhD thesis, University of Malaya.

Mostafa, Modiri Delshad (2016) Backtracking search algorithm for optimal power dispatch in power system / Mostafa Modiri Delshad. PhD thesis, University of Malaya.

Muhammad , Aamir (2016) Design of a non-isolated single phase online ups topology with parallel battery bank for low power applications / Muhammad Aamir. PhD thesis, University of Malaya.

Muhammad Faisal , Siddiqui (2016) Magnetic resonance imaging sense reconstruction system using FPGA / Muhammad Faisal Siddiqui. PhD thesis, University of Malaya.

Muhammed Ashik, U.P (2016) Development of nanocatalysts via co-precipitation cum modified stöber method and application to methane decomposition / Muhammed Ashik.U.P. PhD thesis, University of Malaya.

Mun, Peck Shen (2016) Measurement and classification of urinary dielectric properties for type 2 diabetes mellitus and chronic kidney disease / Mun Peck Shen. PhD thesis, University of Malaya.

Muna, Hassan Ahmed Ibrahim (2016) Investigating the stability of superoxide ion generated in ionic liquids and the conversion of sulfur compounds / Muna Hassan Ahmed Ibrahim. Masters thesis, University of Malaya.

Mushtaq, Ahmad (2016) Two-step synthesis of nano heterometallic catalysts for water treatment and biogasoline production / Mushtaq Ahmad. PhD thesis, University of Malaya.

Navin Raja , Kuppusamy (2016) Thermal enhancement in a microchannel heat sink using passive methods / Navin Raja Kuppusamy. PhD thesis, University of Malaya.

Ng, Chee Guan (2016) Implementation of environmental life cycle assessment model in organic municipal solid waste management in Malaysia / Ng Chee Guan. PhD thesis, University of Malaya.

Ng, Yee Sern (2016) Electrokinetic process in soil remediation for lead removal / Ng Yee Sern. PhD thesis, University of Malaya.

Nguyen , Huu Tho (2016) Fuzzy multi-criteria analysis for machine tool selection and optimal machine loading in flexible manufacturing cell / Nguyen Huu Tho. PhD thesis, University of Malaya.

Nik Azimatolakma , Awang (2016) Formation and stability of aerobic granular sludge in sewage treatment under low loading conditions / Nik Azimatolakma Awang. PhD thesis, University of Malaya.

Nooranida, Arifin (2016) The influence of prosthetic foot types and altered sensory conditions on the postural stability of below-knee amputees during upright standing / Nooranida Arifin. PhD thesis, University of Malaya.

Nor Taibah, Taazim (2016) Development of titanium diboride layer through superplastic compression method /Nor Taibah Taazim. Masters thesis, University of Malaya.

Nuha, S. Mashaan (2016) Use of waste tyre rubber in enhancing the mechanical properties of stone mastic asphalt mix / Nuha S. Mashaan. PhD thesis, University of Malaya.

Nur Athirah, Yazid (2016) Development of automated visual tracking system for surgical instruments / Nur Athirah Yazid. Masters thesis, University of Malaya.

Nur Ayuni , Jamal (2016) Fabrication and performance evaluation of low to medium porosity closed-cell porous aluminum via powder metallurgy technique / Nur Ayuni Jamal. PhD thesis, University of Malaya.

Nurul Afiqah , Mohd Zaki (2016) Extraction and deproteination of extracted silk fibers from silk cocoon and development of hydrophilic electrospun silk fibers / Nurul Afiqah Mohd Zaki. Masters thesis, University of Malaya.

Nurul Shahida, Mohd Shalahim (2016) The relationship between anthropometry and hand grip strength among older Malaysian people / Nurul Shahida Mohd Shalahim. PhD thesis, University of Malaya.

Olatomiwa Lanre , Joseph (2016) Optimal planning and design of hybrid renewable energy system for rural healthcare facilities / Olatomiwa Lanre Joseph. PhD thesis, University of Malaya.

Pouya Sirous, Rezaei (2016) Enhancement of aromatic hydrocarbon production and suppression of coke formation in catalytic pyrolysis of biomass / Pouya Sirous Rezaei. PhD thesis, University of Malaya.

Praveena Nair, Sivasankaran (2016) Development of an optimal dragonfly-like flapping wing structure for use in biomimetic micro air vehicles / Praveena Nair Sivasankaran. PhD thesis, University of Malaya.

Ravi Kumar, Sharma (2016) Reliability testing and heat transfer enhancement of organic phase change materials / Ravi Kumar Sharma. PhD thesis, University of Malaya.

Rubentheren, Viyapuri (2016) Development of chitosan based nanocomposite film for the wing membrane of biomimetic micro air vehicles (BMAV) / Rubentheren Viyapuri. PhD thesis, University of Malaya.

Saman , Paria (2016) Development of nanofluid based horizontal heat storage unit / Saman Paria. PhD thesis, University of Malaya.

Sami Fathi , Ali Khalil (2016) Development and evaluation of an improved multiple frequency bioimpedance analyzer for disease management system / Sami Fathi Ali Khalil. PhD thesis, University of Malaya.

Samira , Gharehkhani (2016) Heat transfer and friction loss analysis of non-wood fiber suspensions in closed conduit flow / Samira Gharehkhani. PhD thesis, University of Malaya.

Sara, Tahan Latibari (2016) Encapsulation of organic phase change materials within metal oxides for thermal energy storage systems / Sara Tahan Latibari. PhD thesis, University of Malaya.

Sarfaraz , Kamangar (2016) Computational hemodynamic analysis of stenosed coronary artery / Sarfaraz Kamangar. PhD thesis, University of Malaya.

Sazzad , Sharif (2016) Retardation of corrosion and tribological degradation of automotive materials in palm biodiesel / Sazzad Sharif. PhD thesis, University of Malaya.

Seyed Hossein, Mahdavi (2016) Structural health monitoring using adaptive wavelet functions / Seyed Hossein Mahdavi. PhD thesis, University of Malaya.

Seyed Sina , Sebtahmadi (2016) 12 sector dtc and pso-pi current control technics of z-source matrix converter for IM drive / Seyed Sina Sebtahmadi. PhD thesis, University of Malaya.

Seyedsaeed , Tabatabaeikia (2016) Performance analysis of exhaust air energy recovery wind turbine / Seyedsaeed Tabatabaeikia. PhD thesis, University of Malaya.

Shervin, Motamedi (2016) Design, construction and monitoring of ecofriendly revetments for coastal protection / Shervin Motamedi. PhD thesis, University of Malaya.

Shima, Rahim Pouran (2016) Development and evaluation of niobium and molybdenum substituted magnetite catalysts for fenton-like treatment of recalcitrant wastewaters / Shima Rahim Pouran. PhD thesis, University of Malaya.

Shwan Hussain, Said (2016) Evaluation of mechanical properties of engineered cementitious composite for exterior beam-column joints under reversed cyclic loading / Shwan Hussain Said. PhD thesis, University of Malaya.

Sina Davazdah , Emami (2016) Flame propagation of premixed gas mixtures deflagration in tee pipelines / Sina Davazdah Emami. PhD thesis, University of Malaya.

Sina Mirzapour , Mounes (2016) A study of fibre glass grid reinforced hot mix asphalt concrete / Sina Mirzapour Mounes. PhD thesis, University of Malaya.

Sk. Shezan , Arefin (2016) Performance analysis of solar-wind-diesel hybrid standalone renewable energy systems suitable for Malaysian climate / Sk. Shezan Arefin. Masters thesis, University of Malaya.

Solangi Khalid , Hussain (2016) Heat transfer to graphene nanoplatelets and metaloxides-studies in thermophysical properties and particle characterization / Solangi Khalid Hussain. PhD thesis, Universiti Malaya.

Sujit, Singh (2016) Development of sustainable manufacturing decision making models for small and medium enterprises / Sujit Singh. PhD thesis, University of Malaya.

Syahirah, Abd. Halim (2016) Design and evaluation of metal oxide surge arrester parameters for lightning over voltages / Syahirah Abd. Halim. PhD thesis, University of Malaya.

Syed Naveed, Raza Shah (2016) Behavior of steel pallet rack beam to column connections at ambient and elevated temperatures / Syed Naveed Raza Shah. PhD thesis, University of Malaya.

Syed Safdar , Raza (2016) Islanding detection techniques for distribution system using minimum power system parameters / Syed Safdar Raza. PhD thesis, University of Malaya.

Tan, Kok Tong (2016) Seismic performance and fragility curves for reinforced concrete framed buildings in Klang Valley / Tan Kok Tong. PhD thesis, University of Malaya.

Tan, Soon Sien (2016) Effect of sintering profile on the densification behaviour of forsterite ceramics /Tan Soon Sien. Masters thesis, University of Malaya.

Tan, Yoke Meng (2016) Influence of processing parameters in the mechanical properties enhancement of forsterite ceramic / Tan Yoke Meng. PhD thesis, University of Malaya.

Tawsif, Ahmed Siddique (2016) Synthesis and characterization of secondary and ternary ammonium based protic ionic liquids for thermoelectrical cell /Tawsif Ahmed Siddique. Masters thesis, University of Malaya.

Tawsif Ahmed , Siddique (2016) Synthesis and characterization of secondary and ternary ammonium based protic ionic liquids for thermoelectrical cell / Tawsif Ahmed Siddique. PhD thesis, University of Malaya.

Teoh, Yew Heng (2016) Experimental investigations of a common rail direct injection diesel engine using biodiesel blends in reactivity controlled compression ignition mode / Teoh Yew Heng. PhD thesis, University of Malaya.

Torabi, Mohammad Saeed (2016) Development of top key performance indicators for enhancing hse commitment in selected companies / Torabi Mohammad Saeed. PhD thesis, University of Malaya.

Umma, Habiba (2016) The preparation of chitosan/PVA/zeolite electrospun composite nanofibrous membrane for heavy metal removal application / Umma Habiba. Masters thesis, University of Malaya.

Vijeta, Khare (2016) Detection of multi-oriented moving text in videos / Vijeta Khare. PhD thesis, University of Malaya.

Wong, Jee Keen Raymond (2016) Partial discharge classification on xlpe cable joints under different noise levels using artificial intelligence techniques / Wong Jee Keen Raymond. PhD thesis, University of Malaya.

Yessi, Jusman (2016) Computer-aided screening system for cervical precancerous cells based on field emission scanning electron microscopy and energy dispersive x-ray / Yessi Jusman. PhD thesis, University of Malaya.

Yong, Kar Wey (2016) Effects of cryopreservation conditions on human adipose-derived mesenchymal stem cells and its potential application in cardiac fibrosis / Yong Kar Wey. PhD thesis, University of Malaya.

Yu, Yong Poh (2016) Dynamic heart rate estimation using facial images from video sequences / Yu Yong Poh. PhD thesis, University of Malaya.