Items where Division is "Faculty of Engineering" and Year is 2017

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 185.

Aainaa Aqilah, Baharuddin (2017) Self-assembly of synthesized 4-pentynoic acid functionalized magnetite-maghemite nanoparticles on silicon dioxide/n-type silicon substrate / Aainaa Aqilah Baharuddin. Masters thesis, University of Malaya.

Abdul Rauf, Abu Bakar (2017) Cortical auditory evoked potential assessment on passive speech perception using contrast of voicing and articulation placing among subjects with sensorineural hearing loss / Abdul Rauf Abu Bakar. Masters thesis, University of Malaya.

Abdullah, Al-Mamoon (2017) Study on the thermal performance of a multi-layer structural green roof panel / Abdullah-Al-Mamoon. Masters thesis, University of Malaya.

Abdullahi Aliyu , Alhaji (2017) Design and development of an integrated mixing and injection moulding machine for micro metal parts / Abdullahi Aliyu Alhaji. PhD thesis, University of Malaya.

Abdulrahman Eyada, Ibrahim (2017) Numerical analysis of wind induced response of spar mooring-riser system / Abdulrahman Eyada Ibrahim. PhD thesis, University of Malaya.

Abu Mohammed, Sifullah (2017) Studying the fusion cutting mechanism in CO2 laser blanking of stainless steel-304 square samples / Abu Mohammed Sifullah. Masters thesis, University of Malaya.

Ahmad , Amiri (2017) Functionalization and exfoliation of bulk graphite into few-layer graphene sheets for improved heat dissipation / Ahmad Amiri. PhD thesis, University of Malaya.

Ahmad Faiz , Abd Rashid (2017) A life cycle assessment approach for sustainable residential buildings in Malaysia / Ahmad Faiz Abd Rashid. PhD thesis, University of Malaya.

Ahmed Hasan, Hamood al-Masoodi (2017) Q-switching and mode-locking pulse generation in Ytterbium-doped fiber lasers using nanomaterial saturable absorbers / Ahmed Hasan Hamood al-Masoodi. PhD thesis, University of Malaya.

Airul Sharizli, Abdullah (2017) Development of collision avoidance warning system for heavy vehicles featuring adaptive minimum safe distance / Airul Sharizli Abdullah. PhD thesis, University of Malaya.

Aisha, Muhammad (2017) Performance evaluation of a three-phase nine level voltage source converter using selective harmonic elimination technique / Aisha Muhammad. Masters thesis, University of Malaya.

Ali Mohammed, Moqdad Ijam (2017) Thermophysical and electro-optical properties of carbon nanomaterials based nanofluids / Ali Mohammed Moqdad Ijam. PhD thesis, Universiti Malaya.

Alireza , Rafieerad (2017) Mechanical and biological evaluations of smart antibacterial nanostructured TI-6AL-7NB implant / Alireza Rafieerad. PhD thesis, University of Malaya.

Ameer, Naeemi Zyarah (2017) Image restoration techniques for removal of blurred images / Ameer Naeemi Zyarah. Masters thesis, University of Malaya.

Amin Khalili, Moghaddam (2017) Ultra low power CMOS rectifier design for radio frequency energy harvesting systems using self-body-biasing techniques / Amin Khalili Moghaddam. PhD thesis, University of Malaya.

Amir, Faisal (2017) Active contour models for knee cartilage and meniscus ultrasound image segmentation / Amir Faisal. PhD thesis, University of Malaya.

Arslan, Ahmed (2017) Effect of laser textured DLC coated AISI 52100 steel on the tribological behavior for engine applications / Arslan Ahmed. PhD thesis, University of Malaya.

Ashis, Tripathy (2017) Design and development of Ca-Mg-Fe-Ti-oxides based perovskite for high sensitive humidity sensors and wound healing applications / Ashis Tripathy. PhD thesis, University of Malaya.

Asrul, Adam (2017) Selection and optimization of peak features for event-related eeg signals classification / Asrul bin Adam. PhD thesis, University of Malaya.

Atikah, Aman (2017) Design and analysis of wudu' (ablution) workstation for elderly in Malaysia / Atikah Aman. Masters thesis, University of Malaya.

Azwar, Muhammad Yahya (2017) Modelling and on-line implementation of advanced control strategies for biohydrogen production in microbial electrolysis cell reactor system / Azwar Muhammad Yahya. PhD thesis, University of Malaya.

Bakhtiar, Ali (2017) Effect of iron and bismuth addition on the microstructure and mechanical properties of sac105 solder under severe thermal environment / Bakhtiar Ali. Masters thesis, University of Malaya.

Bassam Ahmed, Mohammed Al-Khelly (2017) Design and development of enhanced anti surge control by using smith predictor method / Bassam Ahmed Mohammed Al-Khelly. Masters thesis, University of Malaya.

Chen, Long (2017) Wake of horizontal axis tidal-current turbine and its effects on scour / Chen Long. PhD thesis, University of Malaya.

Chew , Chun Ming (2017) Evaluation, modelling and control of ultrafiltration membrane water treatment systems / Chew Chun Ming. PhD thesis, University of Malaya.

Choo, Kai Wen (2017) Preparation and characterization of polyvinyl alcohol/chitosan composite films reinforced with cellulose nanofiber / Choo Kai Wen. Masters thesis, University of Malaya.

Chow, Ching Yan (2017) Sustainable extended producer responsibility (EPR) model for managing household e-waste in Malaysia / Chow Ching Yan. Masters thesis, University of Malaya.

Diaa Abdelmonem , Mahmoud Abidou (2017) Numerical modeling and simulation of material removal in laser drilling of thin metal sheets using meshfree collocation methods / Diaa Abdelmonem Mahmoud Abidou. PhD thesis, University of Malaya.

Dilkumar, Marimuthu (2017) Qualitative evaluation of cardiac diagnostic machines in National Heart Institute of Malaysia / Dilkumar Marimuthu. Masters thesis, University of Malaya.

Edwind , Liaw Yee Kang (2017) Computer vision based traffic signs recognition system / Edwind Liaw Yee Kang. Masters thesis, University of Malaya.

Ehsan , Shekarian (2017) Forward and backward fuzzy economic order quantity models considering learning theory / Ehsan Shekarian. PhD thesis, University of Malaya.

Ezalia , Mohd Fauzi (2017) A study on the performance and stability of hollow fiber supported liquid membranes using ionic liquid as bi-functional carriers for extraction of mercury / Ezalia Mohd Fauzi. Masters thesis, University of Malaya.

Fadiyatul Nabilah, Abu Bakar (2017) Assessment of permit-to-work (PTW) system in a pipeline operator company / Fadiyatul Nabilah Abu Bakar. Masters thesis, University of Malaya.

Farahin , Mohd Jais (2017) Development of effective modified palm shell waste-based activated carbon adsorbents for pollutants removal / Farahin Mohd Jais. Masters thesis, University of Malaya.

Fatimah Nadhirah, Isa (2017) Machinery risk assessment during warehouse racking installation / Fatimah Nadhirah Isa. Masters thesis, University of Malaya.

Febry Yadi, Zainal (2017) Real-time monitoring and control of water pump system / Febry Yadi Zainal. Masters thesis, University Malaya.

Goh, Kian Heng (2017) Samarium oxide and samarium oxynitride thin film gate oxides on silicon substrate / Goh Kian Heng. PhD thesis, University of Malaya.

Goh, Kian Wei (2017) Effect of pH and calcination temperature on co-precipitated indium oxide nanoparticles / Goh Kian Wei. Masters thesis, University of Malaya.

Haziratul Mardhiah, Hamdan (2017) Biodiesel synthesis via heterogeneous carbon acid catalysis from de-oiled jatropha curcas waste / Haziratul Mardhiah Hamdan. Masters thesis, University of Malaya.

Hazli Rafis, Abdul Rahim (2017) Structured growth of zinc oxide nanorods on plastic optical fiber and light side coupling towards sensing applications / Hazli Rafis Abdul Rahim. PhD thesis, University of Malaya.

Ho, Seck Wei (2017) Racing car detection using cascaded classifier / Ho Seck Wei. Masters thesis, University of Malaya.

Huan, Hui Yan (2017) Efficiency enhancement of distributed power amplifier design for radio frequency communication systems / Huan Hui Yan. Masters thesis, University of Malaya.

Huzaifa, Hashim (2017) Soil liquefaction hazard assessment along shoreline of Peninsular Malaysia / Huzaifa Hashim. PhD thesis, University of Malaya.

Ibitoye, Morufu Olusola (2017) Mechanomyography for neuromuscular electrical stimulation feedback applications in persons with spinal cord injury / Ibitoye Morufu Olusola. PhD thesis, Universiti Malaya.

Iklil Hakimah, Hussin (2017) A three dimensional human amniotic membrane/fibrin scaffold for cartilage tissue engineering application / Iklil Hakimah Hussin. Masters thesis, University of Malaya.

Jarinah , Mohd Ali (2017) Hybrid fuzzy-sliding mode observer design for estimation and advanced control of an ethylene polymerization process / Jarinah Mohd Ali. PhD thesis, University of Malaya.

Jeffrey Chin , Kong Leon (2017) Mechanical properties of hydroxyapatite-magnesium orthosilicate composite / Jeffrey Chin Kong Leong. PhD thesis, University of Malaya.

Jegathis, Murugesu (2017) Design and analysis of frame scaffolding capacity using thickness and material as variables / Jegathis Murugesu. Masters thesis, University of Malaya.

Jeyanthan, Silvalinggam (2017) Energy management and improvement strategies in a local spice manufacturing plant / Jeyanthan Silvalinggam. Masters thesis, University of Malaya.

Karunan, Joseph (2017) Development of power generation system using piezoelectric and electromagnetic induction techniques on lab-on-a-disc (LOD) for localized heating / Karunan Joseph. Masters thesis, University of Malaya.

Khairi Najmi , Mahusain (2017) Safety evaluation and risk assessment on a selected pipe welding services workshop for oil and gas industry /Khairi Najmi Mahusain. Masters thesis, University of Malaya.

Khaled Mageed , Ahmad A E Al Qattan (2017) Assessment of the physicochemical properties of drinking water of selected schools in Kuwait / Khaled Mageed Ahmad A E Al Qattan. Masters thesis, University of Malaya.

Khalil Ahmed , Qasem As'ham (2017) Frequency reuse and power control for interference mitigation in femtocell lte-a network / Khalil Ahmed Qasem As'ham. Masters thesis, University of Malaya.

Laith Mahmoud, Mohammad Halabi (2017) Performance analysis of hybrid renewable energy systems used for rural electrification in Malaysia / Laith Mahmoud Mohammad Halabi. Masters thesis, University of Malaya.

Leang, So Khuong (2017) Experimental study and improvement on tribological behaviors of automotive lubricants with dilution of various gasoline-bioethanol blends / Leang So Khuong. Masters thesis, University of Malaya.

Leong, Siong Hean (2017) Behavior of reverse top-seat angle connection at ambient and elevated temperatures / Leong Siong Hean. PhD thesis, University of Malaya.

Lim, Say Li (2017) Processing time estimation in precision machining industry using AI / Lim Say Li. Masters thesis, University of Malaya.

Lim, Wen Jun (2017) Design of wideband power amplifier for gan hemt for radio application / Lim Wen Jun. Masters thesis, University of Malaya.

Liu, Kit Fook (2017) Detection of defect in concrete using elastic wave tomography reconstruction technique / Liu Kit Fook. Masters thesis, University of Malaya.

Low, Wan Shi (2017) Optimization of yield for circulating tumour cell separation using integrated dielectrophoretic-magnetophoretic technique / Low Wan Shi. Masters thesis, University of Malaya.

Mahdi Zeinizadeh, Jeddi (2017) Experimental investigations on novel double-sleeve tubebolt moment connection to concrete filled tubular column / Mahdi Zeinizadeh Jeddi. PhD thesis, University of Malaya.

Masoud , Sarraf (2017) Mechanical and biological behaviors of titania and tantala nanotubular arrays decorated with silver oxide on Ti-6Al-4V alloy / Masoud Sarraf. PhD thesis, University of Malaya.

Md Palash , Sarker (2017) Performance and emissions analysis of jatropha and aphanamixis polystachya methyl esters and investigation of NOx additive in CI diesel engine / Md Palash Sarker. Masters thesis, University of Malaya.

Md. Arafat, Mahmood (2017) Growth, characterization and gas sensing properties of one dimensional oxide nanostructures on Ti and Ti-6Al-4V alloy substrates synthesized by thermal oxidation / Md. Arafat Mahmood. PhD thesis, University of Malaya.

Md. Rubel , Basar (2017) Resonant inductive wireless power transfer system for wireless capsule endoscopy application / Md. Rubel Basar. PhD thesis, University of Malaya.

Md. Ruhul , Amin (2017) Optimization of aphanamixis based biodiesel and its combustion characteristics / Md. Ruhul Amin. Masters thesis, University of Malaya.

Md. Sadek , Uddin Chowdhury (2017) Study on water quality and heavy metals in relation to landuse activities of Selangor River / Md. Sadek Uddin Chowdhury. Masters thesis, University of Malaya.

Md. Sayem , Hossain Bhuiyan (2017) Design and development of mechanically controlled above knee prosthesis / Md. Sayem Hossain Bhuiyan. PhD thesis, University of Malaya.

Md.Nazmul , Huda (2017) Behavior of flexural members made from oil palm shell and clinker concrete / Md. Nazmul Huda. Masters thesis, University of Malaya.

Messikh, Tarek (2017) Boundary control of a dual-output boost converter with multilevel inverter topology / Messikh Tarek. PhD thesis, University of Malaya.

Meysam, Davoody (2017) Solid suspension and gas dispersion in gas-solid-liquid stirred vessels with high solid concentration / Meysam Davoody. PhD thesis, University of Malaya.

Mirta , Widia (2017) Maximum acceptable lifting frequency model in manual material handling task at automotive industries in Malaysia / Mirta Widia. PhD thesis, University of Malaya.

Mohamad Hussain , F Snosi (2017) Performance study of fractional frequency reuse in ofdma network / Mohamad Hussain F Snosi. Masters thesis, University of Malaya.

Mohamed, Kamruzzaman (2017) Mitigation of plate end debonding in CFRP strengthened wide-flange steel I-beams under monotonic and fatigue loading / Mohamed Kamruzzaman. PhD thesis, University of Malaya.

Mohamed Bashir, Ali Bashir (2017) Thermoelectric properties of LaCo4Sb12 skutterudite materials by addition of Al, In, Ni & Te / Mohamed Bashir Ali Bashir. PhD thesis, University of Malaya.

Mohamed Khalid, Mohamed Saied (2017) Removal of heavy metals from water using carbon nanotubes functionalized with deep eutectic solvents / Mohamed Khalid Mohamed Saied. PhD thesis, University of Malaya.

Mohammad Hossein, Mahdavifard (2017) Investigation on mechanical, microstructural and thermal properties of Sn-0.7Cu and Sn-1Ag 0.5Cu solder alloys bearing Fe and Bi / Mohammad Hossein Mahdavifard. PhD thesis, University of Malaya.

Mohammad Hussein, Mohammad Dreidy (2017) Frequency control scheme for islanded distribution network with high PV penetration / Mohammad Hussein Mohammad Dreidy. PhD thesis, University of Malaya.

Mohammad Jakir, Hossain Khan (2017) Polypropylene production in a fluidised BED catalytic reactor: Comprehensive modeling, optimisation and pilot scale experimental validation / Mohammad Jakir Hossain Khan. PhD thesis, University of Malaya.

Mohammad Razaul , Karim (2017) Feasibility assessment of palm oil clinker powder as supplementary cementitious material / Mohammad Razaul Karim. PhD thesis, University of Malaya.

Mohammad Reza, Delsouz Khaki (2017) Activity enhancement of copper doped TiO2/ZnO photo catalyst for degradation of recalcitrant pollutants / Mohammad Reza Delsouz Khaki. PhD thesis, University of Malaya.

Mohammed , Heydari (2017) Optimization of multipurpose reservoir operation using evolutionary algorithms / Mohammed Heydari. PhD thesis, University of Malaya.

Mohammed F. E. , Alnahhal (2017) Investigation on microstructure, mechanical and durability characteristics of recycled aggregate concrete with non-traditional supplementary cementitious materials / Mohammed F. E. Alnahhal. Masters thesis, University of Malaya.

Mohd Bakar , Mohd Mishani (2017) Application of simplified operating deflection shape technique in machinery vibration assessment / Mohd Bakar Mohd Mishani. Masters thesis, University of Malaya.

Mohd Bukhari, Mat Salleh (2017) Ergonomics assessment for seat belt achorage location at rear center seat / Mohd Bukhari Mat Salleh. Masters thesis, University of Malaya.

Mohd Firdaus , Bakri (2017) Reducing carbon emission by visiting patients activities in a screening centre through cleaner production strategies / Mohd Firdaus Bakri. Masters thesis, University of Malaya.

Mohd Firdaus , Manap (2017) Effect of free air ball (FAB) formation on wire bond integrity in palladium coated copper (PdCu) wire / Mohd Firdaus Manap. Masters thesis, University of Malaya.

Mohd Kamar , Uddin (2017) Design of a modified class EF2 inverter for electric vehicle charging through wireless power transfer / Mohammad Kamar Uddin. Masters thesis, University of Malaya.

Mohd Zubir, Md Idris (2017) Performance evaluation of copper brazing using CU-NI-SN-P filler metal / Mohd Zubir Md Idris. Masters thesis, University of Malaya.

Monowar, Hossain (2017) Techno-economic evaluation of off-grid hybrid renewable energy system for rural resort electrification in Malaysia / Monowar Hossain. Masters thesis, University of Malaya.

Mubashir, Gulzar (2017) Tribological study of nanoparticles enrichedbio-based lubricants for engine piston ring–cylinder interaction / Mubashir Gulzar. PhD thesis, University of Malaya.

Mubeenah Titilona , Sanni (2017) Design and development of an electromygraphy (EMG) based active elbow orthosis with feedback control / Mubeenah Titilona Sanni. Masters thesis, University of Malaya.

Muhammad, Awais (2017) Multiple tuning curve based wideband RC VCO design / Muhammad Awais. Masters thesis, Universiti Malaya.

Muhammad, Jamaluddin (2017) Workstation design and analysis on student working in electrical wiring lab at Politeknik Tuanku Syed Sirajuddin / Muhammad Jamaluddin. Masters thesis, University of Malaya.

Muhammad , Aslam (2017) Mechanical properties and structural performance of sustainable lightweight aggregate concrete using blended oil palm bio products / Muhammad Aslam. PhD thesis, University of Malaya.

Muhammad , Nasir (2017) Electromigration damage in lead-free solder joints prepared using metallic nanoparticle doped flux / Muhammad Nasir. PhD thesis, University of Malaya.

Muhammad Hanif , Ahmad Nizar (2017) Pattern recognition of heart valve in echocardiogram using convolutional neural network / Muhammad Hanif Ahmad Nizar. Masters thesis, University of Malaya.

Muhammad Hazrie , Ibrahim (2017) Smart manufacturing: its challenge and future implementation in Malaysia / Muhammad Hazrie Ibrahim. Masters thesis, University of Malaya.

Muhammad Usman , Rashid (2017) Development of Ni-based catalysts via microemulsion synthesis approach for methane dry reforming / Muhammad Usman Rashid. PhD thesis, University of Malaya.

Mukhtar , Fatihu Hamza (2017) Design of type-2 fuzzy logic controllers using meta-heuristic optimization algorithms for rotary inverted pendulum / Mukhtar Fatihu Hamza. PhD thesis, University of Malaya.

Mustapha Kamil Husen , Abdul Kadir (2017) Girder deflection for lifting load / Mustapha Kamil Husen Abdul Kadir. Masters thesis, University of Malaya.

Nahdatul Aishah, Mohd Sharif (2017) Biomechanical effects of different knee sleeves on early unilateral knee osteoarthritis in 6 weeks intervention / Nahdatul Aishah Mohd Sharif. Masters thesis, University of Malaya.

Nashrah Hani , Jamadon (2017) Mechanical and thermal aging behaviors of lead free solder joint with addition of porous copper interlayer / Nashrah Hani Jamadon. PhD thesis, University of Malaya.

Natasha , Ahmad Nawawi (2017) Properties of calcium phosphate bioceramic prepared by solid state and chemical route / Natasha Ahmad Nawawi. PhD thesis, University of Malaya.

Nguyen, Thanh Sang (2017) Passivity-based multivariable control for the stabilization of continuous styrene polymerization reactor / Nguyen Thanh Sang. Masters thesis, University of Malaya.

Nima , Kazemi (2017) The effect of human learning and forgetting on fuzzy EOQ model with backorders / Nima Kazemi. PhD thesis, University of Malaya.

Noor Farah Hani , Amir (2017) Carbon footprint reduction for clinical waste management using cleaner production strategies at a selected Hospital / Noor Farah Hani Amir. Masters thesis, University of Malaya.

Noor Farahain, Muhammad Amin (2017) Development of flood hazard map for Johor river basin / Noor Farahain Muhammad Amin. Masters thesis, University of Malaya..

Nor Adzliana , Sajahan (2017) Synthesis and characterization of hydroxyapatite from waste materials / Nor Adzliana Sajahan. Masters thesis, University of Malaya.

Nor Aliya, Hamizi (2017) Synthesis and characterization of Mn-doped CdSe quantum dots via inverse micelle technique / Nor Aliya Hamizi. PhD thesis, University of Malaya.

Nor Azlina, Ab. Aziz (2017) An adaptively switching iteration strategy for population based metaheuristics / Nor Azlina Ab. Aziz. PhD thesis, University of Malaya.

Nor Ilyana, Muhd Nordin (2017) Evaluation of corrosive environment impact on low cost Fe/Al ADDED SAC105 solder alloys / Nor Ilyana Muhd Nordin. PhD thesis, University of Malaya.

Noratika, Mohd Zin (2017) Noise reduction techniques for partial discharge classification in XPLE cable joint / Noratika Mohd Zin. Masters thesis, University of Malaya.

Noreena, Nordin (2017) Material flow cost accounting for a traditional cottage industry: Batik / Noreena Nordin. Masters thesis, University of Malaya.

Norhuda, Hamzah (2017) Analysis of inrush current impacts towards transformer protection capability / Norhuda Hamzah. Masters thesis, University of Malaya.

Norjannah, Basan (2017) Biodiesel production from ceiba pentandra oil using enzymatic reaction / Norjannah Basan. Masters thesis, University of Malaya.

Norlailah, Lanisa (2017) Digital infrared thermography analysis for breast cancer using image textures features / Norlailah Lanisa. Masters thesis, University of Malaya.

Nur Afifah Auni , Mohd Nasir (2017) Optimal recloser placement for improving distribution system reliability using particle swarm optimization / Nur Afifah Auni Mohd Nasir. Masters thesis, University of Malaya.

Nur Afiqah , Hashim (2017) Development of prosthetic terminal device with sensory feedback / Nur Afiqah Hashim. Masters thesis, University of Malaya.

Nur Amanina , Zainal (2017) Anthropometric measurement for disable students / Nur Amanina Zainal. Masters thesis, University of Malaya.

Nur Farhanah , Zulkipli (2017) Generation of Q-Switching pulse train with topology insulators / Nur Farhanah Zulkipli. Masters thesis, University of Malaya.

Nur Nadia, Ahmad Hasan (2017) The effects of sintering additives on the mechanical properties and microstructure evolution of 3 MOL% Y-TZP / Nur Nadia Ahmad Hasan. Masters thesis, University of Malaya.

Nurul Izzati , Mohamad (2017) Safety, health & environmental hazard identification and risk assessment on warehouse racking installation site / Nurul Izzati Mohamad. Masters thesis, University of Malaya.

Nusrat Khan, Bintu (2017) Q-switched and mode-locked erbium-doped fiber laser with Co-ZnO saturable absorber / Nusrat Khan Bintu. Masters thesis, University of Malaya.

Omar, Almubaied (2017) Corrosion process monitoring of reinforced concrete structure using fiber bragg grating (FBG) strain sensor / Omar Almubaied. Masters thesis, University of Malaya.

Omid , Haddad (2017) Analysis of cyclic performance of stiffened steel plate Shear walls / Analysis of cyclic performance of stiffened steel plate Shear walls / Omid Haddad. PhD thesis, University of Malaya.

Oyejobi Damilola, Oyewumi (2017) Stochastic dynamic response of a tension leg platform / Oyejobi Damilola Oyewumi. PhD thesis, University of Malaya.

Paveethra, Thegarathah (2017) Safety level assessment at selected Malaysian Schools / Paveethra Thegarathah. Masters thesis, University of Malaya.

Poh, Kai Sin (2017) A comprehensive performance investigation of an under-floor air distribution system in the tropics / Poh Kai Sin. Masters thesis, University of Malaya.

Praven, Rajendran (2017) Control of an active magnetic bearing system using pso-based tuning pid controller / Praven Rajendran. Masters thesis, University of Malaya.

Puteri Nur Farhana, Hamdan (2017) The effect of ankle-foot orthoses constrained movements on power output during functional electrical stimulation cycling in paraplegics / Puteri Nur Farhana Hamdan. Masters thesis, University of Malaya.

Putri Nor Liyana , Mohamad Radzi (2017) Study on the impact of renewable energy for rural development in Malaysia / Putri Nor Liyana Mohamad Radzi. Masters thesis, University of Malaya.

Raja Nurul Hani, Raja Azhar (2017) Corrosion characteristics of aluminium alloys in calophyllum inophyllum biodiesel / Raja Nurul Hani Raja Azhar. Masters thesis, University of Malaya.

Rajeshree, Vejasegaran (2017) Design of array antenna for centric communication / Rajeshree Vejasegaran. Masters thesis, University of Malaya.

Ramli, Abd Rahman (2017) Implementation of cleaner production strategies for offset lithography printing industry / Ramli Abd Rahman. Masters thesis, University of Malaya.

Rasedul, Hasan (2017) Soft-switching active-clamp flyback microinverter for pv applications / Rasedul Hasan. Masters thesis, University of Malaya.

Razuana, Rahim (2017) New standard methodology in cleaner production for small & medium industries / Razuana Rahim. PhD thesis, University of Malaya.

Rehan , Zahid (2017) Tribological analysis of diamond-like carbon coatings in combination with bio-lubricants for engine cam tappet interaction / Rehan Zahid. PhD thesis, University of Malaya.

Rohani, Mokhtar (2017) Behaviour of precast beam-to-column connections by using partly hidden corbel / Rohani Mokhtar. Masters thesis, University of Malaya.

S.M. Showybul, Islam Shakib (2017) Zero-voltage switching bi-directional isolated LLC resonant DC/DC converter for wide voltage gain and load range / S.M. Showybul Islam Shakib. Masters thesis, University of Malaya.

Samir, Hassani (2017) Mathematical modeling of optical and thermal behaviour of a new cascade nanofluid-based PV/T system / Samir Hassani. PhD thesis, University of Malaya.

Sara , Pourshahrestani (2017) Development of gallium-doped mesoporous bioactive glass as hemostatic agent / Sara Pourshahrestani. PhD thesis, University of Malaya.

Satheeskumar , Rajadran (2017) To study the chiller plant room performance /Satheeskumar Rajadran. Masters thesis, University of Malaya.

Sayed Mojtaba, Tabibian (2017) Computational fluid dynamics simulation of exhaust ventilation and jet fan systems during a fire event in velodrome / Sayed Mojtaba Tabibian. Masters thesis, University of Malaya.

Seyed Ali, Asgharzadehahmadi (2017) Intensification of dual-phase operations using low-frequency high-power ultrasound irradiation / Seyed Ali Asgharzadehahmadi. PhD thesis, University of Malaya.

Seyed Alireza, Ravanfar (2017) Vibration-based structural damage detection and system identification using wavelet multiresolution analysis / Seyed Alireza Ravanfar. PhD thesis, University of Malaya.

Seyedeh Maryam , Hosseini (2017) Synthesis of nanofluid to improve heat transfer in annular concenteric heat exchanger / Seyedeh Maryam Hosseini. Masters thesis, University of Malaya.

Shamini, P. Janasekaran (2017) Welding of T-joint configuration between dissimilar metals using low powered fiber laser / Shamini P. Janasekaran. PhD thesis, University of Malaya.

Shiu , Kai Ping (2017) Study of copper-aluminium high temperature die-attach material with different aluminium weight percentage /Shiu Kai Ping. Masters thesis, University of Malaya.

Shivashankar , Sukumar (2017) Energy management system for optimal operation of microgrid consisting of PV, fuel cell and battery / Shivashankar Sukumar. PhD thesis, University of Malaya.

Shyrose, Wahid (2017) Development and characterisation of biodegradable electrospun polyhydroxybutyrate (PHB) / rice husk derived bioactive glass ceramic (RHBGC) composite scaffolds / Shyrose Wahid. Masters thesis, University of Malaya.

Siti Asiah , Muhammad (2017) Seasonal impact on water quality and model development of a tropical urban river / Siti Asiah Muhammad. Masters thesis, University of Malaya.

Siti Rusyida , Rohim (2017) The relationship between neck muscle strength and duration of computer work among women employees / Siti Rusyida Rohim. Masters thesis, University of Malaya.

Sophi Shilpa, Gururajapathy (2017) Fault location in distribution systems using mathematical analysis and support vector machine / Sophi Shilpa Gururajapathy. PhD thesis, University of Malaya.

Suhana, Koting (2017) Evaluation and improvement of accessibility to urban Rail Transit System in Klang Valley, Malaysia / Suhana Koting. PhD thesis, University of Malaya.

Sunita, Harun (2017) Development of cutting tool through superplastic boronizing of duplex stainless steel /Sunita Harun. Masters thesis, University of Malaya.

Sunusi Marwana , Manladan (2017) Microstructural evolution and mechanical properties of magnesium alloy/austenitic stainless steel joints produced by resistance spot welding techniques / Sunusi Marwana Manladan. PhD thesis, University of Malaya.

Syamsul , Bahri (2017) Mechanical and durability properties of high performance 100 MPA rice husk ash concrete / Syamsul Bahri. PhD thesis, University of Malaya.

Syed Hassan , Abbas Jaffery (2017) Evaluation of electrical properties, oxidation and corrosion behavior of Fe and Bi added Sn-0.7 Cu lead-free solder alloy / Syed Hassan Abbas Jaffery. Masters thesis, University of Malaya.

Syed Muzamil, Ahmed (2017) Heat transfer and frictional pressure drop of crop fiber suspensions in closed conduit flow and nanofluid flow in backward-facing step / Syed Muzamil Ahmed. Masters thesis, University of Malaya.

Syed Waqar , Hasan (2017) Membrane inserted thermo-electrochemical generator for enhanced power generation / Syed Waqar Hasan. PhD thesis, University of Malaya.

Syeda, Reham Shahed (2017) Oxidation and thermal stability enhancement of emulsified palm oil methyl ester in diesel engine / Syeda Reham Shahed. Masters thesis, University of Malaya.

Tan, Ai Ting (2017) Ultrasonic assisted reflow soldering of lead free solder joint / Tan Ai Ting. PhD thesis, University of Malaya.

Tan, Jian Ding (2017) An improved electromagnetism-like mechanism algorithm for the optimization of maximum power point tracking / Tan Jian Ding. PhD thesis, University of Malaya.

Tang, Chee Kuang (2017) Development of antimicrobial composite films of chitin nanofiber reinforced chitosan containing silver salt / Tang Chee Kuang. Masters thesis, University of Malaya.

Tatagar Mohammad Yunus, Khan (2017) Effects of injection parameters on performance of diesel engine run on biodiesel from direct transesterification / Tatagar Mohammad Yunus Khan. PhD thesis, University of Malaya.

Teh, Yee Ching (2017) The effects of various processing conditions on the properties of hydroxyapatite / Teh Yee Ching. PhD thesis, University of Malaya.

Tey, Yong Yuen (2017) Design of an ultra wideband low noise amplifier for cognitive radio applications / Tey Yong Yuen. Masters thesis, University of Malaya.

Tuan Ahmad Fauzi, Tuan Abdullah (2017) Optimization of electrical wiring design in buildings using particle swarm optimization and genetic algorithm / Tuan Ahmad Fauzi Tuan Abdullah. Masters thesis, University of Malaya.

Uma Mageswary, K. Munusamy (2017) Ergonomic facilities in special education school / Uma Mageswary K. Munusamy. Masters thesis, University of Malaya.

Vela, Lai Kin Ming (2017) Hierarchical based integrated dust management system in a cement manufacturing plant in Malaysia / Vela Lai Kin Ming. Masters thesis, University of Malaya.

Vikneswaran, Padasivam (2017) Corrosion effect of ceiba pentandra blends with commercial diesel on aluminium alloys / Vikneswaran Padasivam. Masters thesis, University of Malaya.

Wail Sami, Wadee Sarsam (2017) Thermal performance of a flat-plate solar collector using aqueous colloidal dispersions of carbon-based nanostructures / Wail Sami Wadee Sarsam. PhD thesis, University of Malaya.

Wajahat Ullah Khan, Tareen (2017) A new three phase transformerless shunt active power filter with reduced switch count for harmonic compensation in grid-connected applications / Wajahat Ullah Khan Tareen. PhD thesis, University of Malaya.

Wan Norhasiah, Wan Bidin (2017) Full scale testing of precast beam to column connection using billet connector and beam half joint subjected to reversible loading / Wan Norhasiah Wan Bidin. Masters thesis, University of Malaya.

Wan Nur Atikah, Haji Wan Nafi (2017) Corrosion behaviour of poly-l-lactic acid coated magnesium by electrospinning / Wan Nur Atikah Haji Wan Nafi. Masters thesis, University of Malaya.

Wee, Wei Hong (2017) Development of particle maipulation and analysis tool for microfluidic device using dielectrophoresis / Wee Wei Hong. PhD thesis, Universiti Malaya.

Yanusiya, Argenan (2017) Work-related musculoskeletal disorders (WMSDs) among teachers and student's management assistants in special education schools in Malaysia / Yanusiya Argenan. Masters thesis, University of Malaya.

Yap, Jiazhen (2017) Economic dispatch considering of electric vehicle in power system network / Yap Jiazhen. Masters thesis, University of Malaya.

Yeo, Wei Hong (2017) Prediction of oxide scale growth and thermo-mechanical stress-strain of austenitic steel and nickel-based alloy tubes in ultra-supercritical power plant / Yeo Wei Hong. PhD thesis, University of Malaya.

Yew, Wan Tian (2017) Seabed scour induced by twin-propeller ships / Yew Wan Tian. PhD thesis, University of Malaya.

Yousef Ali, Mohammed Al-Gumaei (2017) Utility-based non-cooperative power control game in wireless environment / Yousef Ali Mohammed Al-Gumaei. PhD thesis, University of Malaya.

Yusria, Darma (2017) A time series analysis of road traffic fatalities in Malaysia / Yusria Darma. PhD thesis, University of Malaya.

Yves Paul, Vincent Mbous (2017) Profiling the cytotoxicity of deep eutectic solvent systems and their potential applications as anticancer agents / Yves Paul Vincent Mbous. Masters thesis, University of Malaya.

Zhou, Ding (2017) Stress intensity factors for embedded cracks within torsionally loaded square prismatic bars / Zhou Ding. Masters thesis, University of Malaya.

This list was generated on Fri Mar 29 08:57:46 2024 MYT.