Items where Subject is "T Technology > TS Manufactures"

A

Abdul Majid, Faridah (1991) Feasibility studies of utilising oil palm (Elaeis guineensis Jacquin) leaves for paper pulp / Faridah Abdul Majid. Masters thesis, University of Malaya.

Abu Mohammed, Sifullah (2017) Studying the fusion cutting mechanism in CO2 laser blanking of stainless steel-304 square samples / Abu Mohammed Sifullah. Masters thesis, University of Malaya.

Aliasghar , Niakan (2016) Characteristics and properties of natural hydroxyapatite derived from bovine bone for biomedical applications / Aliasghar Niakan. PhD thesis, University of Malaya.

Allina, Abdullah (2011) A study of yield quantity discrepancy reduction in semi-conductor back-end process / Allina Binti Abdullah. Masters thesis, University of Malaya.

Arina, Mohd Noh (2011) CFD analysis of solar dryer greenhouse / Arina binti Mohd Noh. Masters thesis, Universiti Malaya.

Auwal , Shamsu Tukur (2019) Effect of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti joints / Auwal Shamsu Tukur. PhD thesis, Universiti Malaya.

C

Chan, Chow Khuen (2011) A finite element analysis of residual stress in brazing of sapphire and inconel / Chan Chow Khuen. Masters thesis, University of Malaya.

Chiang, Yoong Fatt (2019) Feasibility study on handheld devices-based augmented reality system for identification and inspection processes in manufacturing industry / Chiang Yoong Fatt. Masters thesis, University Malaya.

Chien, Wei Ee (2011) Implementation of flexible manufacturing system in a fertilizer plant to reduce inventory and waste : a case study / Chien Wei Ee. Masters thesis, University of Malaya.

D

Davoud Mashhadi, Jafarlou (2016) Study on equal channel angular extrusion of circular cross section components and its application for joining dissimilar metals / Davoud Mashhadi Jafarlou. PhD thesis, University of Malaya.

H

Hidayat, - (2019) Investigation on improving mechanical properties of aluminium alloy sheet 5052-h32 for automotive application / Hidayat. Masters thesis, University of Malaya.

Hussam Abdulla Moussa, Mouhanna (2019) Effects of heat transfer in jig molds in injection casting / Hussam Abdulla Moussa Mouhanna. Masters thesis, University of Malaya.

I

Ibrahem Maher, Abdelrahem Soltan (2016) Development of a new performance criteria for higher wire-electrical discharge machining performance considering the ecological and economical aspects / Ibrahem Maher Abdelrahem Soltan. PhD thesis, University of Malaya.

J

Julirose , Gonzales (2018) Genetic algorithm optimization of product design for environmental impact reduction / Julirose Gonzales. PhD thesis, University of Malaya.

K

Khalidah, Ahmad Kamil (2018) Layout design for mass customisation production: An action based case study in small enterprise / Khalidah Ahmad Kamil. Masters thesis, Universiti Malaya.

L

Logapriya, Logamaintan (2019) Optimisation of electroplating parameters and surface defect analysis / Logapriya Logamaintan. Masters thesis, University of Malaya.

Lye, Ying Jie (2019) Mechanical properties and morphology of nitrile butadiene rubber (NBR) with nano cellulose crystal / Lye Ying Jie. Masters thesis, University of Malaya.

M

Mahdi, Sparham (2015) A new technique for lubrication control based on friction conditions in CNC machine linear guideways using servomotor current signals in feed drive system / Mahdi Sparham. PhD thesis, University of Malaya.

Mahmoud Sarhan, Saddam Own (2018) Study of residual stress and microstructure evolution in magnesium alloy (WE43) due to deformation process via (PTCAP) / Mahmoud Sarhan Saddam Own. Masters thesis, University of Malaya.

Maryam , Mousavi (2018) Scheduling of automated guided vehicles in a flexible manufacturing system / Maryam Mousavi. PhD thesis, University of Malaya.

Md Jalil, M.A.S. (2005) Development of Al-Cu-SiC[p] metal matrix composite for automotive applications / Mohd Azlis Sani bin Md Jalil. Masters thesis, University of Malaya.

Mirta , Widia (2017) Maximum acceptable lifting frequency model in manual material handling task at automotive industries in Malaysia / Mirta Widia. PhD thesis, University of Malaya.

Mohammadi, Maryam (2015) Metaheuristic algorithms for solving lot-sizing and scheduling problems in single and multi-plant environments / Maryam Mohammadi. PhD thesis, University of Malaya.

N

Nagalingam, Thilaga Vaani (2005) Electric discharge machining characteristics of hardened tool steel using aluminium, copper and copper electroplated aluminium electrodes / Thilaga Vaani Nagalingam. Masters thesis, Universiti Malaya.

Ng, Yeow Chian (2019) Process optimization in rubber injection moulding manufacturing / Ng Yeow Chian. Masters thesis, University of Malaya.

O

Othman, Raihan (1998) Hydrogenated silicon nitride alloy from DC plasma decomposition : preparation and physical properties / Raihan bin Othman. Masters thesis, University of Malaya. .

R

Razuana, Rahim (2017) New standard methodology in cleaner production for small & medium industries / Razuana Rahim. PhD thesis, University of Malaya.

S

See , Kwan Wern (2018) Comparison of mechanical properties of hydroxyapatite derived from different additive powders with conventional sintering / See Kwan Wern. Masters thesis, University of Malaya.

Syufiqa Nurfatin, Rasid (2018) Effects of deformation process on residual stress and grain size of magnesium alloy ZK60 / Syufiqa Nurfatin Rasid. Masters thesis, University of Malaya.

T

Tan, Seng Hai (1990) Designing for assembly and manufacturability / Tan Seng Hai. Other thesis, University of Malaya.

Tan, Yoke Meng (2016) Influence of processing parameters in the mechanical properties enhancement of forsterite ceramic / Tan Yoke Meng. PhD thesis, University of Malaya.

Ting , Chen Hunt (2018) Sintering effects and hydrothermal ageing behaviour of Yttria-stabilised zirconia with MnO2 doping / Ting Chen Hunt. PhD thesis, University of Malaya.

Tun Mohamad Arifin, Yahaya (2018) A study of ergonomic risk on workers performing material manual handling of activity at manufacturing industry / Tun Mohamad Arifin Yahaya. Masters thesis, University of Malaya.

V

Vatiapan, Sethuraman (2004) Static and dynamic analysis in a draw punch design / Sethuraman s/o Vatiapan. Masters thesis, Universiti Malaya.

Vijayalakshmi, Bejamin Samuel (2016) Development of sustainable production indicators using the analytical hierarchy process for the petrochemical industry in Malaysia / Vijayalakshmi Benjamin Samuel. PhD thesis, University of Malaya.

Y

Yusuf Suleiman , Dambatta (2018) Grinding of Si3N4 ceramic using nano-particles suspended in vegetable oil based lubricants / Yusuf Suleiman Dambatta. PhD thesis, Universiti Malaya.