Number of items: 177.
Abdul Aziz , Ahmed Siyad (2019) Design and development of IP based automotic bottle inspection system using controllino maxi automation / Abdul Aziz Ahmed Siyad. Masters thesis, University Malaya.
Abdul Halim Poh , Yuen Wu (2019) Non-invasive dengue screening method via optical spectroscopy: A multivariate investigation / Abdul Halim Poh Yuen Wu. PhD thesis, Universiti Malaya.
Abdul Syukur , Abdul Rahman (2019) Method and system for sustainable and clean hydrogen energy using water splitting and concentrated sunlight / Abdul Syukur Abdul Rahman. Masters thesis, University Malaya.
Adamu Yusuf , Abdullahi (2019) Development of A 6-DOF 3D printed industrial robot for teaching and learning / Adamu Yusuf Abdullahi. Masters thesis, University of Malaya.
Adib Zulfadhli, Mohd Alias (2019) Integration of simulation for ergonomics assessment in operation control centre (railway industries) / Adib Zulfadhli Mohd Alias. Masters thesis, University Malaya.
Ahad , Javanmardi (2019) Seismic behaviour investigation of a cable-stayed bridge with hybrid passive control system / Ahad Javanmardi. PhD thesis, Universiti Malaya.
Ahmad Azim , Shukri (2019) Simulation and design of NSM strengthened beams using moment-rotation approach / Ahmad Azim Shukri. PhD thesis, Universiti Malaya.
Ahmad Hafiz, Jafarul Tarek (2019) Flow simulation analysis of maju cable tunnel ventilation system / Ahmad Hafiz Jafarul Tarek. Masters thesis, University of Malaya.
Ahmad Najimuddin, Ismail (2019) Prediction of bubble velocities in air-water two-phase flow using void fraction profiles / Ahmad Najimuddin Ismail. Masters thesis, University Malaya.
Ahmad Razif , Muhammad (2019) Short pulse fiber laser based on pure metal saturable absorber / Ahmad Razif Muhammad. PhD thesis, University of Malaya.
Ali Shahir, Shawkat (2019) Feasibility of diesel-biodiesel-alcohol blend fuels for diesel engine / Ali Shahir Shawkat. Masters thesis, University Malaya.
Ananthasayanam Subramani , Sharath (2019) Design and development of heat exchanger based on open cell metal foam / Ananthasayanam Subramani Sharath. Masters thesis, Universiti Malaya.
Andrew Ng , Kay Lup (2019) Kinetic modeling of gas-phase phenol hydrodeoxygenation over Ag/TiO2 catalyst via TGA-FTIR based microreactor / Andrew Ng Kay Lup. PhD thesis, Universiti Malaya.
Auwal , Shamsu Tukur (2019) Effect of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti joints / Auwal Shamsu Tukur. PhD thesis, Universiti Malaya.
Aya Ali , Hasan Almukhtar (2019) Development of flat gain and wide-band erbium doped fiber amplifier using hybrid active medium / Aya Ali Hasan Almukhtar. PhD thesis, Universiti Malaya.
Ayaz , Asif (2019) Fabrication of mold parts using fused deposition modeling and vacuum casting / Ayaz Asif. Masters thesis, Universiti Malaya.
Badruzzaman, Kamaruzaman (2019) Computational analysis of water surge phenomenon at power station / Badruzzaman Kamaruzaman. Masters thesis, University of Malaya.
Bakr Saeed Riziq , Daraghmeh (2019) Design and development of automation system for (clothes folding machine) / Bakr Saeed Riziq Daraghmeh. Masters thesis, University of Malaya.
Bidattul Syirat , Zainal (2019) High-rate biological hydrogen and methane production from pome in a two-stage anaerobic hybrid reactor / Bidattul Syirat Zainal. PhD thesis, Universiti Malaya.
C.S. Gaston, Ravin Dias (2019) The performance of IoT based health monitoring system in various environments / C.S. Gaston Ravin Dias. Masters thesis, University of Malaya.
Cheah , Mei Yee (2019) Physicochemical and tribological analysis of chemically modified microalgae oil blends for Malaysian conditions / Cheah Mei Yee. PhD thesis, Universiti Malaya.
Chia, Shir Reen (2019) Design and implementation of phlorotannin extraction processing technique from seaweed / Chia Shir Reen. Masters thesis, University Malaya.
Chiang, Yoong Fatt (2019) Feasibility study on handheld devices-based augmented reality system for identification and inspection processes in manufacturing industry / Chiang Yoong Fatt. Masters thesis, University Malaya.
Chin , Ren Jie (2019) Determination of wall slip using rheological method and artificial intelligence techniques / Chin Ren Jie. PhD thesis, University of Malaya.
Choo, Chai Cheng (2019) Greening coil coating paint manufacturing premise using cleaner production strategies / Choo Chai Cheng. Masters thesis, University Malaya.
Choong, Joo Ee (2019) Quantification of potential environmental impacts of electricity generation from the wood wastes using life cycle assessment approach / Choong Joo Ee. Masters thesis, University of Malaya.
Christopher Tseu, Zia Chyuan (2019) Surface modification of aluminium alloy series 6 (AA6061 T657) and its corrosion characteristics / Christopher Tseu Zia Chyuan. Masters thesis, University of Malaya.
Davood , Hooshyar (2019) Development of accelerator and brake pedal position comfort ability base on Malaysian population / Davood Hooshyar. Masters thesis, University of Malaya.
Dian Najihah , Abu Talib (2019) Restoration planning strategy of transmission system based on optimal energizing time of sectionalizing islands / Dian Najihah Abu Talib. PhD thesis, University of Malaya.
Diniesh Naidu, Thannimalai (2019) Numerical analysis of marine riser vortex-induced vibration with helical strake suppression device / Diniesh Naidu Thannimalai. Masters thesis, University of Malaya.
Elham , Montazer (2019) Heat transfer in turbulent nanofluids: Separation flow studies and development of novel correlations / Elham Montazer. PhD thesis, Universiti Malaya.
Faizan , Qamar (2019) Enhancing QOS performance of the 5G network by characterizing mm-wave channel and optimizing interference cancellation scheme / Faizan Qamar. PhD thesis, University of Malaya.
Farah , Ramadhani (2019) Optimum design of sofc based polygeneration system for residential area with vehicle charging or fueling station / Farah Ramadhani. PhD thesis, Universiti Malaya.
Fatima Azzahra , Manap (2019) Fetal QT interval detection from abdominal ECG signals by using iterative independent component analysis / Fatima Azzahra Manap. PhD thesis, Universiti Malaya.
Fatin Athirah, Azali (2019) Postural stability and risk of fall of person with trilateral prosthesis / Fatin Athirah Azali. Masters thesis, University Malaya.
Fitriani, Fitriani (2019) Development of dope bismuth sulfide system for thermoelectric application / Fitriani. PhD thesis, University of Malaya.
Ganesh , Krishnasamy (2019) Semi-supervised learning for feature selection and classification of data / Ganesh Krishnasamy. PhD thesis, University of Malaya.
Goh, Jenn Hsen (2019) The feasibility of developing an embossed fiberglass filter media pack for air filtration devices / Goh Jenn Hsen. Masters thesis, University of Malaya.
Gowri , Gopalakrishnan (2019) Kinematics and kinetics assessment of lower limb movement in bharatanatyam dancers / Gowri Gopalakrishnan. Masters thesis, University Malaya.
Hamisu Umar , Farouk (2019) Effect of chloride and sulfate ions on deactivation of TiO2 anatase in photocatalytic treatment of methylene blue and methyl orange / Hamisu Umar Farouk. PhD thesis, Universiti Malaya.
Hasan Fouzi , Salem Gafri (2019) Membranes enhanced anti-biofouling properties by chitosan and chitosan-powder activated carbon composite / Hasan Fouzi Salem Gafri. PhD thesis, University of Malaya.
Hasifa , Hashim (2019) Analysis of water quality in University Malaya rainwater harvesting system / Hasifa Hashim. Masters thesis, University of Malaya.
Hazmimi , Kasim (2019) Development of matrix assessment level of safety practice for radiation risk in Malaysian radiation facilities / Hazmimi Kasim. PhD thesis, Universiti Malaya.
Hazrul , Mohamed Basri (2019) Model predictive current and reactive power control for multilevel four-leg indirect matrix converter / Hazrul Mohamed Basri. PhD thesis, University of Malaya.
Hidayat, - (2019) Investigation on improving mechanical properties of aluminium alloy sheet 5052-h32 for automotive application / Hidayat. Masters thesis, University of Malaya.
Huda Adnan , Abdullah Zain (2019) A study on tapered optical fiber sensor for relative humidity measurements / Huda Adnan Abdullah Zain. Masters thesis, Universiti Malaya.
Husna, Abdul Rahim (2019) In house electrostatic field meter calibration for improved ESD protection / Husna Abdul Rahim. Masters thesis, University of Malaya.
Hussam Abdulla Moussa, Mouhanna (2019) Effects of heat transfer in jig molds in injection casting / Hussam Abdulla Moussa Mouhanna. Masters thesis, University of Malaya.
Ibrahim Amer , Ibrahim (2019) Auditory evoked potential in normal hearing and sensorineural hearing loss among Malay and Chinese adults / Ibrahim Amer Ibrahim. PhD thesis, Universiti Malaya.
Ibtissam, El Ghailassi (2019) The study of EMG parameters of trans-tibial amputees for walking with different speeds / Ibtissam El Ghailassi. Masters thesis, University of Malaya.
Isra, Zulfiqar (2019) Invitro studies on electrospun polyurethane scaffolds / Isra Zulfiqar. Masters thesis, University of Malaya.
Izzah Syahira , Mohd Ashri (2019) The accuracy of blood pressure measurement between aneroid and digital sphygmomanometer in reference to mercury sphygmomanometer / Izzah Syahira Mohd. Masters thesis, University Malaya.
Jahangir , Hassan Khan (2019) IoT based IMU sensor network for human arm pose estimation / Jahangir Hassan Khan. Masters thesis, Universiti Malaya.
Jassinnee , Milano (2019) Biodiesel production from waste cooking oil blend with calophyllum inophyllum through microwave irradiation-assisted transesterification method / Jassinnee Milano. PhD thesis, University of Malaya.
Katheres, Murugesu (2019) Flow simulation of icon city cable tunnel ventilation / Katheres Murugesu. Masters thesis, University of Malaya.
Kaviraj , Jayaraman (2019) Heat transfer and friction loss analysis of a novel eco-friendly colloidal suspension in flow passages / Kaviraj Jayaraman. Masters thesis, Universiti Malaya.
Khaw , Hui Ying (2019) Intelligent image noise types recognition and denoising system using deep learning / Khaw Hui Ying. PhD thesis, University of Malaya.
Khaw , Ying Ying (2019) Characterization of poly (lactic acid) composite reinforced with cellulose and keratin treated with 1-butyl-3-methylimidazolium chloride / Khaw Ying Ying. Masters thesis, Universiti Malaya.
Kong , Kok Haw (2019) Fire life and health safety investigation of an innovative ventilation system in underground parking facilities / Kong Kok Haw. PhD thesis, University of Malaya.
Lee, Liang Yoong (2019) Assessment and analysis of voltage stability indices in power system network / Lee Liang Yoong. Masters thesis, University of Malaya.
Lee , Derk Huan (2019) Design and development of upscaled automated phase controlled impact device for operational modal testing / Lee Derk Huan. Masters thesis, Universiti Malaya.
Lei , Zhen Ce (2019) Formation of ZrO2 gate dielectric on Ge substrate by thermal oxidation and post annealing for metal-oxide-semiconductor devices / Lei Zhen Ce. PhD thesis, University of Malaya.
Liew , Shan Qin (2019) Extraction of pectin from pomelo peels using conventional heating, ultrasonic, microwave and subcritical water techniques / Liew Shan Qin. PhD thesis, Universiti Malaya.
Lim , Chee Cheow (2019) Low power and low phase noise RF CMOS oscillators for wireless applications / Lim Chee Cheow. PhD thesis, University of Malaya.
Ling, Siong Shi (2019) Dynamic heart rate measurements from video sequences using canonical component analysis / Ling Siong Shi. Masters thesis, University Malaya.
Logapriya, Logamaintan (2019) Optimisation of electroplating parameters and surface defect analysis / Logapriya Logamaintan. Masters thesis, University of Malaya.
Loh, Hwei Ling (2019) Effect of Zn additions on the electrochemical migration behaviour of SAC305 solder alloys / Loh Hwei Ling. Masters thesis, University of Malaya.
Loh , Zhi Pin (2019) Investigation of ternary blended binder PVA fibre reinforced cementitious composites as repair material / Loh Zhi Pin. Masters thesis, Universiti Malaya.
Lokesh Anand, Vijayakumaran (2019) High efficiency RF power amplifier with closed loop system for public safety radio communications / Lokesh Anand Vijayakumaran. PhD thesis, Universiti Malaya.
Low, Pui Leng (2019) Curing characterization of pressureless sintered die attach material as leadfree salution in microelectronics packaging / Low Pui Leng. Masters thesis, University of Malaya.
Lye, Ying Jie (2019) Mechanical properties and morphology of nitrile butadiene rubber (NBR) with nano cellulose crystal / Lye Ying Jie. Masters thesis, University of Malaya.
Mahmoud Zakaria Alsayed, Abdalfattah Ibrahim (2019) Laser cladding of FeCrMoCB metallic glass on nickel-free stainless-steel to develop durable and cost-effective biomedical implants / Mahmoud Zakaria Alsayed Abdalfattah Ibrahim. PhD thesis, Universiti Malaya.
Mahmudur , Rahman (2019) Pid-aco vibration controller with magnetorheological damper for wind turbine tower / Mahmudur Rahman. PhD thesis, Universiti Malaya.
Mahsa Sadegh , Pour (2019) Modified polyethylene glycol as a potential material for CO2 capture / Mahsa Sadegh Pour. PhD thesis, Universiti Malaya.
Maizan, Muhamad (2019) Design and fabrication of low power differential low noise amplifier for WLAN application in deep sub-micron standard CMOS technology / Maizan Muhamad. PhD thesis, Universiti Malaya.
Marlyza , Said (2019) Investigation on musculoskeletal disorders among office workers in Putrajaya / Marlyza Said. Masters thesis, University Malaya.
Md Akter , Hosen (2019) Efficient side near surface mounting techniques for strengthening of reinforced concrete beams / Md Akter Hosen. PhD thesis, Universiti Malaya.
Md. Rasel, Sarkar (2019) Application of nature-inspired algorithms and artificial intelligence for optimal efficiency of horizontal axis wind turbine / Md. Rasel Sarkar. Masters thesis, University of Malaya.
Megat Muhammad Ikhsan, Megat Hasnan (2019) Optimisation of octahedral metal complexes through spin-crossover modulation for harversting thermoelectrochemical energy / Megat Muhammad Ikhsan Megat Hasnan. PhD thesis, Universiti Malaya.
Mehdi, Maghfouri (2019) Optimum oil palm shell content as coarse aggregate in concrete based on mechanical and drying shrinkage properties / Mehdi Maghfouri. Masters thesis, University of Malaya.
Misliana, Md Taib (2019) Study on morphology and electrical properties of graphene oxide decorated with nickel oxide for electrochemical sensor / Misliana Md Taib. Masters thesis, University of Malaya.
Mohamad Faizal , Rosli (2019) Tribological performance of palm oil-based lubricant with nanoparticles additive / Mohamad Faizal Rosli. Masters thesis, University of Malaya.
Mohamad Zul Hilmey , Makmud (2019) Dielectric and electrical characteristics of palm oil-based nanofluid as high voltage insulation material / Mohamad Zul Hilmey Makmud. PhD thesis, Universiti Malaya.
Mohammad , Hashemi (2019) Engineering characteristics of modified roller- compacted concrete pavement / Mohammad Hashemi. PhD thesis, Universiti Malaya.
Mohammad Reza , Abbasi (2019) Dynamic two phase modelling and anfis-based control of ethylene copolymerization in catalytic Fluidized Bed Reactor / Mohammad Reza Abbasi. PhD thesis, Universiti Malaya.
Mohammed Salem , Mohammed Babusail (2019) Analysis and optimal control of susceptible latent-breaking-out-countermeasure computer virus model / Mohammed Salem Mohammed Babusail. Masters thesis, University of Malaya.
Mohd Aswad , Othman (2019) Numerical simulation of Telekom Malaysia (TM) server farm thermal transport phenomena using ansys fluent / Mohd Aswad Othman. Masters thesis, University of Malaya.
Mohd Fahmi , Azman (2019) Design and fabrication of copper-filled photonic crystal fiber for passive optical devices / Mohd Fahmi Azman. PhD thesis, Universiti Malaya.
Mohd Fauzi , Ab Rahman (2019) Fibre-based saturable absorber for generation of short-pulsed fibre lasers / Mohd Fauzi Ab Rahman. PhD thesis, University of Malaya.
Mohd Hafizul Hilmi, Mohd Noor (2019) Development of physical ergonomics design guidelines for processing equipment in Malaysian offshore oil and gas platform / Mohd Hafizul Hilmi Mohd Noor. Masters thesis, University Malaya.
Mohd Zaharifudin , Muhamad Ali (2019) Rain gauge network optimization in a tropical area towards efficient hydrological data acquisition / Mohd Zaharifudin Muhamad Ali. PhD thesis, Universiti Malaya.
Mohd Zakuan , Zabri (2019) Fabrication of spectrally selective solar power absorber material via powder metallurgy process / Mohd Zakuan Zabri. Masters thesis, University Malaya.
Mudasir , Ahmed (2019) Selective harmonic elimination in cascaded H-bridge multilevel inverter using hybrid APSO algorithm / Mudasir Ahmed. PhD thesis, University of Malaya.
Muhamad Nurshafiq , Mohd Yunos (2019) Performance study between variable refrigerant flow and chilled water air conditioning system / Muhamad Nurshafiq Mohd Yunos. Masters thesis, Universiti Malaya.
Muhamad Razi , Samsudin (2019) Fluid dynamics study on the effect of the maximum valve lift to the flow velocity at the intake valve of gasoline engine / Muhamad Razi Samsudin. Masters thesis, University Malaya.
Muhammad , Rizwan (2019) Spark plasma sintered hydroxyapatite / bioglass composite for improved biological performance / Muhammad Rizwan. PhD thesis, University of Malaya.
Muhammad 'Amir, Roslan (2019) Energy performance comparison between the variable refrigerant flow (VRT) and conventional air-conditioning and mechanical ventilation (ACMV) systems for tropical buildings / Muhammad 'Amir Roslan. Masters thesis, University Malaya.
Muhammad Hafizuddin , Zainal Abidin (2019) The impact of ignored negligible losses in engineering design: Baerodynamic drag on ET425M high speed train as study case / Muhammad Hafizuddin Zainal Abidin. Masters thesis, University of Malaya.
Muhammad Zulhaziman , Mat Salleh (2019) Efficient separation of benzene and cyclohexane by liquid liquid extraction using emerging solvents and their binary mixtures / Muhammad Zulhaziman Mat Salleh. PhD thesis, Universiti Malaya.
Murad Abdullah Khamis , Subih (2019) Developing and testing an interface pressure control system in 3d printed transtibial prosthetic socket / Murad Abdullah Khamis Subih. Masters thesis, Universiti Malaya.
Nabeel, Ahmad (2019) Liquefaction of natural rubber to liquid fuel using water and alcohol solvents / Nabeel Ahmad. PhD thesis, Universiti Malaya.
Ng, Connie (2019) Effect of nano alumina on geopolymer mortar developed from untreated and treated palm oil waste ashes / Ng Connie. Masters thesis, University Malaya.
Ng, Yeow Chian (2019) Process optimization in rubber injection moulding manufacturing / Ng Yeow Chian. Masters thesis, University of Malaya.
Ng , Jen Chao (2019) Graphene supported electrocatalysts for alkaline anion-exchange membrane-based direct methanol fuel cell (AAEM-DMFC) applications / Ng Jen Chao. PhD thesis, Universiti Malaya.
Nik Fasdi , Nik Ismail (2019) Parallel inductor multilevel current source inverter with energy-recovery scheme for inductor current balancing / Nik Fasdi Nik Ismail. PhD thesis, University of Malaya.
Nik Nurul Fatima Az-Zahra , Mohd Rosli (2019) The impact of using CJC™ fine filter in diesel genset at Pulau Redang Power Station / Nik Nurul Fatima Az-Zahra Mohd Rosli. Masters thesis, Universiti Malaya.
Noorsyamila Fazyanti , Mustafa (2019) Generation of Q-switching and mode-locking pulses with yttrium oxide based saturable absorber / Noorsyamila Fazyanti Mustafa. Masters thesis, Universiti Malaya.
Noorsyazwani , Zulkifli (2019) Development of dental material glass ionomer cement removal technique using ND:YAG laser / Noorsyazwani Zulkifli. PhD thesis, University of Malaya.
Nor Fadilah , Nasaruddin (2019) Solid Waste management during warehouse racking installation inn paglima garang site / Nor Fadilah Nasaruddin. Masters thesis, University of Malaya.
Nor Zainah , Mohamad (2019) Muscle performance using MC-sensor during FES-evoked contractions in individuals with spinal cord injury / Nor Zainah Mohamad. Masters thesis, University Malaya.
Nur Afiqah Adilah , Muhamad Khosim (2019) Investigation of the void fraction of gas-liquid two phase flow in vertically-upward channel / Nur Afiqah Adilah Muhamad Khosim. Masters thesis, University of Malaya.
Nur Hidayah , Mohd Yusof (2019) Adaptive neurofuzzy inference system for an active transfemoral prosthetic leg using in-socket sensory system / Nur Hidayah Mohd Yusof. Masters thesis, University of Malaya.
Nur Hotimah , Yusof (2019) Multimode interference based optical sensors for structural health monitoring application / Nur Hotimah Yusof. PhD thesis, Universiti Malaya.
Nur Syazwina, Kamardzaman (2019) Assessment of awareness in mobile phone waste recycling program among consumers in Kuala Lumpur / Nur Syazwina Kamardzaman. Masters thesis, University of Malaya.
Nur' Afiqah, Abdul Aziz (2019) Generation of 1.55 micron pulsed fibre laser using graphene oxide and zinc oxide as a saturable absorber / Nur' Afiqah Abdul Aziz. Masters thesis, University Malaya.
Nurfarrahain Nadia, Ahmad (2019) Effect of heat distribution and vibration on wider lead frame / Nurfarrahain Nadia Ahmad. Masters thesis, University of Malaya.
Nurhaslina , Abd Rahman (2019) Microfluidic lab-on-disc approach of 2,2-diphenyl-1-picrylhydrazyl antioxidant assay / Nurhaslina Abd Rahman. Masters thesis, University Malaya.
Nursyazana , Zainal Abidin (2019) Development of q-switched and modelocked erbium-doped fiber lasers (EDFL) based on gold nanoparticles (GNP) as saturable absorber / Nursyazana Zainal Abidin. Masters thesis, University Malaya.
Nurul Adzlin, Zainal (2019) Tribological study of polyol ester-based biolubricants and the effect of molybdenum sulphide as lubricant additives / Nurul Adzlin Zainal. Masters thesis, University of Malaya.
Nurul Ain , Ramli (2019) Supported imidazolium-based ionic liquid membranes as a Contactor for the selective absorption of CO2 by aqueous monoethanolamine / Nurul Ain Ramli. PhD thesis, Universiti Malaya.
Nurul Asyiqin, Mansor (2019) Validation study of a non-invasive diagnostic device for lipid profile / Nurul Asyiqin Mansor. Masters thesis, University of Malaya.
Nurul Fatin Nabilah, Abdul Samat (2019) 2-amino-1, 3-propanediol as a bioglycerol-derived solvent for CO2 capture / Nurul Fatin Nabilah Abdul Samat. Masters thesis, University Malaya.
Nurul Mujahidah , Ahmad Khairuddin (2019) Immobilization of bovine serum albumin on chitosan/PVA film: Physical and mechanical properties investigation / Nurul Mujahidah Ahmad Khairuddin. Masters thesis, University of Malaya.
Nurul Salwani, Mohamad Saadon (2019) Muscle fatigue assessment by mechanomyography and muscle oxygenation during electrically-evoked wrist extension exercise / Nurul Salwani Mohamad Saadon. Masters thesis, Universiti Malaya.
Omar Fayez Almatar , Abd Rabbuh (2019) Synthesis of nanofluid, heat transfer and friction loss of nanofluid in different shaped heat exchanger tubes / Omar Fayez Almatar Abd Rabbuh. Masters thesis, Universiti Malaya.
Phoo, Yoong Hau (2019) Preventing delayed cracks in deep drawing processes of SUS304 cylindrical cups using a coated die / Phoo Yoong Hau. Masters thesis, University of Malaya.
Poon, Hiew Mun (2019) Development and validation of a compact biodiesel surrogate fuel model for multi-dimensional cfd applications / Poon Hiew Mun. Masters thesis, University Malaya.
Pravinah Nair, Shasidharan (2019) Design of complementary class-c oscillator with tail current source feedback and noise suppression for wireless applications / Pravinah Nair Shasidharan. Masters thesis, University Malaya.
Rakesh, Kamalakannan (2019) Heat exchange simulation of mobile bottle chiller / Rakesh Kamalakannan. Masters thesis, University of Malaya.
Razif , Mohammed Shahreza (2019) Safety culture of Petronas ICT staff in Menara Exxonmobil / Razif Mohammed Shahreza. Masters thesis, University of Malaya.
Rodianah , Alias (2019) Biocompatible and antibacterial silver tantalum oxide thin film by magnetron sputtering for surgical applications / Rodianah Alias. PhD thesis, Universiti Malaya.
Rosmadi , Abdullah (2019) DC-link voltage balancing and common-mode current reduction of five-level diode-clamped inverter / Rosmadi Abdullah. PhD thesis, University of Malaya.
Saddam Shueai , Hussein Al-Namer (2019) Design and implementation of a new multilevel DC -link three-phase T-type inverter / Saddam Shueai Hussein Al-Namer. PhD thesis, University of Malaya.
Sado , Fatai (2019) An active lower-extremity exoskeleton for synchronous mobility assistance in lifting and carrying manual handling task / Sado Fatai. PhD thesis, Universiti Malaya.
Saiyed Rasol , Tuan Muda (2019) Development of interactive maths teaching tool for engineering education / Saiyed Rasol Tuan Muda. Masters thesis, University Malaya.
Saktishvikmend, Anbalagan (2019) Design of flapping mechanism and analysis on the lift force of the wings / Saktishvikmend Anbalagan. Masters thesis, University of Malaya.
Sakunie , Sawai (2019) Cytotoxic effect of konjac glucomannan on the molecular and dielectric properties of HepG2 and WRL68 liver cell lines / Sakunie Sawai. Masters thesis, University of Malaya.
Salem Omar Abdullah, Dhuban (2019) Microwave and conventional sintering of manganese-doped alumina: Densification and mechanical Properties / Salem Dhuban. Masters thesis, Universiti Malaya.
Sara Lee , Kit Yee (2019) Effect of microwave sintering on the densification and properties of copper oxide doped Y-TZP ceramics / Sara Lee Kit Yee. PhD thesis, Universiti Malaya.
Serena Low, Woan Ching (2019) Bioelectrical impedance analysis of fat in the body composition influenced by Ogawa MasterDrive 4D / Serena Low Woan Ching. Masters thesis, University of Malaya.
Seri' Aisyah , Hassim (2019) Pattern recognition of lettuce varieties with machine learning / Seri' Aisyah Hassim. Masters thesis, University Malaya.
Shahidah Nusailah , Rashid (2019) Application of eutectic solvents in chemical and enzymatic reactions of upstream processes for biodiesel production / Shahidah Nusailah Rashid. Masters thesis, University Malaya.
Shaqina, Ramlan (2019) Cleaner production assessment and improvement strategies in a textile industry / Shaqina Ramlan. Masters thesis, University Malaya.
Sheralia Ufairah, Abdullah (2019) Prediction of local buckling behavior of reeled pipeline with probabilistic approach using finite element analysis / Sheralia Ufairah Abdullah. Masters thesis, University of Malaya.
Siah, Meng Zhe (2019) Development of aluminium-copper die-attach alloy for high operational temperature application / Siah Meng Zhe. Masters thesis, University Malaya.
Siti Asmah, Abdullah (2019) Intelligent motion planning of a mobile robot by using convolutional neural network / Siti Asmah Abdullah. Masters thesis, University Malaya.
Siti Shafiah , Shazali (2019) Green approach to functionalize highly stable graphene nanoplatelet colloid for heat-based applications / Siti Shafiah Shazali. PhD thesis, Universiti Malaya.
Sivanesh Kumar , Selearajen (2019) Heat transfer and pressure loss analysis of a novel colloidal suspension in turbulent flow conduits / Sivanesh Kumar Selearajen. Masters thesis, Universiti Malaya.
Soon , Foo Chong (2019) Intelligent vehicle recognition system using deep learning / Soon Foo Chong. PhD thesis, University of Malaya.
Soudeh , Iranmanesh (2019) Enhancement of the thermal performance of an evacuated tube solar collector using nanofluids with grapheme nanoplatelets / Soudeh Iranmanesh. PhD thesis, Universiti Malaya.
Sri Ganesh , Elangkovan (2019) Study of mitigation of superheater tube failure & maintenance of an industrial boiler / Sri Ganesh Elangkovan. Masters thesis, Univesiti Malaya.
Subashiny, Prabakaran (2019) Corrosion behaviour of aluminium-graphene nano platelets (AL/GNP) nanocomposite / Subashiny Prabakaran. Masters thesis, University of Malaya.
Suguna, Jeganathan (2019) Synthesis of hydroxyapatite from fish bone (scomber scombrus) using thermal decomposition method / Suguna Jeganathan. Masters thesis, University of Malaya.
Sultan, Mahmud (2019) IoT Microsoft access based database management system for health care and clinical settings / Sultan Mahmud. Masters thesis, University of Malaya.
Syed Mohammad Ammar , Haeder (2019) Titanium dioxide coating microfiber for humidity sensor application / Syed Mohammad Ammar Haeder. Masters thesis, Universiti Malaya.
Tan, Feng Jie (2019) Investigation of impedance-based fault location techniques in power system network / Tan Feng Jie. Masters thesis, University of Malaya.
Tan, Shiou Xuan (2019) Ultrasound assisted biodiesel synthesis from jatropha oilseeds using in-situ reactive extraction / Tan Shiou Xuan. Masters thesis, University of Malaya.
Tan, Vy Luoh (2019) Analysis of short term load forecasting techniques / Tan Vy Luoh. Masters thesis, University of Malaya.
Tan , Kim Han (2019) Fabrication and optical behaviour of nanocomposites from electrodeposited au nanoparticles in polymer microcavities / Tan Kim Han. PhD thesis, University of Malaya.
Tawfik Hamood , Qaid (2019) Properties of eggshell-derived hydroxyapatite coatings on titanium produced by micro-arc oxidation method / Tawfik Hamood Qaid. Masters thesis, Universiti Malaya.
Tengku Farhanah, Tengku Johari (2019) Prevalence and risk factors of musculoskeletal disorder (MSD) among school teachers in Klang Valley / Tengku Farhanah Tengku Johari. Masters thesis, University of Malaya.
Thennakoon Mudiyanselage, Sampath Udeni Gunathilake (2019) Synthesis, characterization and in vitro investigation of nanocellulose reinforced chitosan hydrogel for enhancing bioavailability of curcumin / Thennakoon Mudiyanselage Sampath Udeni Gunathilake. PhD thesis, Universiti Malaya.
Umi Zalilah, Mohamad Zaidi (2019) Surface modification of Ti-allloy with silver silicon nitride coating for antibacterial applications / Umi Zalilah Mohamad Zaidi. Masters thesis, University of Malaya.
Vikram, Nanthanar (2019) Study of puncher materials for singulation process in semiconductor manufacturing industry / Vikram Nanthanar. Masters thesis, University of Malaya.
Wan Safiyyah Nurnajah, Wan Ahmad Tajuddin (2019) Investigation of trapezius muscle effect using ogawa masterdrive massage chair with electromyogram (EMG) sensor / Wan Safiyyah Nurnajah Wan Ahmad Tajuddin. Masters thesis, University of Malaya.
Wang, Lesu (2019) Design optimization of speed increaser installed on wind power generator / Wang Lesu. Masters thesis, University of Malaya.
Wong, Siaw Lang (2019) Improved techniques to remove color cast and contrast enhancement for underwater images / Wong Siaw Lang. PhD thesis, University of Malaya.
Wong , Kok Hoe (2019) Design, simulation and testing of an omni direction deflector for vertical axis wind turbine / Wong Kok Hoe. PhD thesis, University of Malaya.
Xu , Wei (2019) A study on channel coding for 5G / Xu Wei. Masters thesis, Universiti Malaya.
Yap, Yi Ren (2019) Wood defect detection and classification using deep learning / Yap Yi Ren. Masters thesis, University Malaya.
Yeoh, Ru Sern (2019) Design and development of an online robot programming framework with robot operating system (ROS) / Yeoh Ru Sern. Masters thesis, University of Malaya.
Yushaizad, Yusof (2019) Simplified control strategy of shunt active power filter based on nonlinear load equivalent active impedance estimation / Yushaizad Yusof. PhD thesis, University of Malaya.
Yusliza , Yusof (2019) Synthesis and characterization of multiwalled carbon nanotubes-silver nanoparticles reinforced polyvinyl alcohol nanocomposites (PVA/MWNT-AgNP) as high permittivity materials / Yusliza Yusof. PhD thesis, Universiti Malaya.
Zahrasadat, Masoumidezfouli (2019) An investigation on knowledge, attitude and practice among students of University Malaya towards solid waste management / Zahrasadat Masoumidezfouli. Masters thesis, University of Malaya.
Zameri, Mohamed (2019) Quantification of environmental impacts for the Malaysian rubber industry using life cycle assessment / Zameri Mohamed. PhD thesis, Universiti Malaya.
Zechariah, Balan (2019) Design of low power front-end receiver for bluetooth low energy/ZigBee in nano-scale CMOS technology / Zechariah Balan. Masters thesis, University Malaya.
Zulfadzli , Ridzuan (2019) Measurement of liquid film thickness in high energy gas-liquid two-phase flow / Zulfadzli Ridzuan. Masters thesis, University Malaya.
This list was generated on Sun Nov 3 00:32:11 2024 MYT.