Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

A

A.B.M. Saiful, Islam (2013) Nonlinear dynamic behaviour of fully coupled Spar platform /A.B.M. Saiful Islam. PhD thesis, University of Malaya.

Abbod Ali, Mohammed Saeed (2015) Scouring effect of river bed from the flow over pipe using CFD / Abbod Ali Mohammed Saeed. Masters thesis, University of Malaya.

Abdolhossein, Khalilnejad (2013) Numerical simulation and experimental study of root anchorage /Abdolhossein Khalilnejad. PhD thesis, University of Malaya.

Abdul, Mannan (2018) Tribological investigation of tetrahedral diamond-like carbon (ta-C DLC) coatings using vegetable oil containing anti-wear additives / Abdul Mannan. Masters thesis, Universiti Malaya.

Abdul Halim, Poh Yuen Wu (2013) Development of field deployable fiber bragg grating interrogator / Abdul Halim Poh Yuen Wu. Masters thesis, University of Malaya.

Abdul Muqsith, Ahmad (2018) Pembangunan model ENi berasaskan aktiviti inkuiri bagi program latihan kemahiran kejuruteraan Institut Latihan Kemahiran Malaysia / Abdul Muqsith Ahmad. PhD thesis, University of Malaya.

Abdul Razaq , Rezaei (2020) Optimal distribution of best management practices (BMPS) for urban stormwater runoff quantity and quality control / Abdul Razaq Rezaei. PhD thesis, Universiti Malaya.

Abdullah, Ahmad Najmi (2011) Current transformer dimensioning for unit protection based on pmu 275/132kv perling / Ahmad Najmi Abdullah. Masters thesis, University of Malaya.

Abdulrahman Eyada, Ibrahim (2017) Numerical analysis of wind induced response of spar mooring-riser system / Abdulrahman Eyada Ibrahim. PhD thesis, University of Malaya.

Abolghasem, Akbari (2011) Flood modeling using GIS-based watershed hydrological model and remotely sensed data / Abolghasem Akbari. PhD thesis, University of Malaya.

Abu Hanipah, Ramli (2014) Relationships between safety climate factors and occupational safety and health level of awareness in Malaysia Government Agencies / Abu Hanipah Ramli. PhD thesis, University of Malaya.

Abubakar Ahmad , Aliero (2017) A DNN-based text-to-speech system for Hausa: An under-resourced language / Abubakar Ahmad Aliero. Masters thesis, Universiti Malaya.

Adel Kassem Farag , Gaddafi (2024) Properties enhancement of ternary blended geopolymer mortar with fibres / Adel Kassem Farag Gaddafi. PhD thesis, Universiti Malaya.

Adila, Md Hashim (2013) Integrating user requirements and ergonomics in designing a school workshop workstation / Adila Md Hashim. Masters thesis, University of Malaya.

Adiza , Jamadin (2020) Fatigue damage assessment of reinforced concrete slabs using integrated dynamic testing and simulation / Adiza Jamadin. Undergraduates thesis, Universiti Malaya.

Afia, Sharmin (2016) Engineering properties of ternary blended geopolymer concrete and role of oxide composition on mortar / Afia Sharmin. Masters thesis, University of Malaya.

Afshan, Kordi (2012) Comparative study on Malay children vowel recognition using multi-layer perceptron and recurrent neural networks / Afshan Kordi. Masters thesis, University of Malaya.

Ahad , Javanmardi (2019) Seismic behaviour investigation of a cable-stayed bridge with hybrid passive control system / Ahad Javanmardi. PhD thesis, Universiti Malaya.

Ahasanul, Haque (2016) Circular edge bow-tie nano antenna for energy harvesting systems / Ahasanul Haque. Masters thesis, University of Malaya.

Ahlad, Kumar (2016) Restoration of blurred images using geometric and chebichef moments / Ahlad Kumar. PhD thesis, University of Malaya.

Ahmad , Zaki (2018) Assessment of flexural behaviour of concrete beam with corroded steel rebar using acoustic emission technique / Ahmad Zaki. PhD thesis, University of Malaya.

Ahmad Azim , Shukri (2015) Mechanics based approach for ductility of reinforced concrete beams under cyclic loading / Ahmad Azim Shukri. Masters thesis, Universiti Malaya.

Ahmad Azim , Shukri (2019) Simulation and design of NSM strengthened beams using moment-rotation approach / Ahmad Azim Shukri. PhD thesis, Universiti Malaya.

Ahmad Faiz , Abd Rashid (2017) A life cycle assessment approach for sustainable residential buildings in Malaysia / Ahmad Faiz Abd Rashid. PhD thesis, University of Malaya.

Ahmad Sulieman Alfraihat, Ausilah (2011) Study of permittivity of saliva and urine to classify different stages of breast carcinoma / Ausilah Ahmad Sulieman Alfraihat. Masters thesis, University of Malaya.

Ahmat Mahamat , Ahmat (2023) Development of geopolymer mortar and concrete containing eco-processed pozzolan (EPP) from palm oil industry / Ahmat Mahamat Ahmat. Masters thesis, Universiti Malaya.

Ahmed, M .E. Alnahhal (2020) Performance evaluation of lightweight normal and geopolymer foamed concrete using palm oil fuel ash as partial replacement of binder / Ahmed M. E. Alnahhal. Masters thesis, Universiti Malaya.

Ahmed , Halilu (2021) In-situ electrochemical generation of superoxide ion for the conversion of CO2 and chlorinated compounds in ionic liquid and nanohybrid-ionic liquid media / Ahmed Halilu. PhD thesis, Universiti Malaya.

Ahmed Nasiru , Yahaya (2018) Preliminary design of ac substation grounding system using improved and evolutionary particle swarm optimisation / Ahmed Nasiru Yahaya. Masters thesis, University of Malaya.

Aiad, Hamed Hassan (2014) Mechanical properties and durability of self compacting concrete containing supplementary cementitious materials / Aiad Hamed Hassan. PhD thesis, University of Malaya.

Ainil Hawa , Mohamad Fauzi (2020) Mixed culture polyhydroxyalkanaotes (PHA) production using crude glycerol as carbon source / Ainil Hawa Mohamad Fauzi. Masters thesis, University of Malaya.

Alaa Eldin Mohamed Elamin, Elnour Ahmed (2014) The Assessment of water quality modeling using GIS and Qual2K simulation analysis for the Klang River basin / Alaa Eldin Mohamed Elamin Elnour Ahmed. Masters thesis, University of Malaya.

Alabbas Ahmed , Abduljabbar Al-Azzawi (2020) Wideband and flat-gain optical amplifier with Hafnia-bismuth erbium co-doped fiber / Alabbas Ahmed Abduljabbar Al-Azzawi. PhD thesis, Universiti Malaya.

Ali, Sadollah (2013) Development and applications of metaheuristic algorithms in engineering design and structural optimization / Ali Sadollah. PhD thesis, University of Malaya.

Ali, Shariati (2014) Behaviour of C-shaped angle shear connectors in high strength concrete / Ali Shariati. Masters thesis, University of Malaya.

Ali, Toghroli (2015) Applications of the ANFIS and LR models in the prediction of shear connection in composite beams / Ali Toghroli. Masters thesis, University of Malaya.

Ali Mohammed , Ali Babalghaith (2021) Application of palm oil clinker as fine aggregate replacement in stone matrix asphalt mix design / Ali Mohammed Ali Babalghaith. PhD thesis, Universiti Malaya.

Aliasghar , Niakan (2016) Characteristics and properties of natural hydroxyapatite derived from bovine bone for biomedical applications / Aliasghar Niakan. PhD thesis, University of Malaya.

Alireza, Fallahpour (2016) Development of multi criteria decision making model for supplier selection using gene expression programming / Alireza Fallahpour. PhD thesis, University of Malaya.

Alireza , Yaghoubi Taemeh (2018) Probing into the evolution of a polymorphic semiconductor at nanoscale / Alireza Yaghoubi Taemeh. Masters thesis, University of Malaya.

Alshaqaq, Ebtehal Saleh (2010) Production of multiwall carbon nanotuse for alcohol sensor application / Ebtehal Saleh Alshaqaq. Masters thesis, University of Malaya.

Al–Masri, Walaa Fawzi (2010) Reflective and beam-through types of fiber optic sensor for displacement measurement / by Walaa Fawzi al-Masri. Masters thesis, University of Malaya.

Ameen Mohammed, Salih Ameen (2018) Dynamic behaviour and hydraulic performance of reaction turbines in embankment dams / Ameen Mohammed Salih Ameen. PhD thesis, University of Malaya.

Aminath , Farshana (2018) A phonetically rich and balanced lexical corpus using zipfian distribution for an under resourced language / Aminath Farshana. Masters thesis, University of Malaya.

Amir, Faisal (2017) Active contour models for knee cartilage and meniscus ultrasound image segmentation / Amir Faisal. PhD thesis, University of Malaya.

Amirah, Khalid (2018) Magnetic resonance imaging based 3D models of left ventricular wall thickness and dyssynchrony in acute myocardial infarction / Amirah Khalid. Masters thesis, Universiti Malaya.

Amran, Hossain (2022) A new coil structure for increasing power transfer and misalignment tolerance of wireless electric vehicle charging system / Amran Hossain. Masters thesis, Universiti Malaya.

Amri, Mohd Yasin (2012) Development of automatic number plate recognition software and journey time measurement /Amri Mohd Yasin. Masters thesis, University of Malaya.

Angeline Teoh, Szu Fern (2012) VLSI floor planning optimization using genetic algorithm and cross entropy method / Angeline Teoh Szu Fern. Masters thesis, University of Malaya.

Anis Nurdhiani, Rosdi (2015) Preparation and characterization of proton exchange membrane (PEM) using polystyrene precursors / Anis Nurdhiani Rosdi. Masters thesis, Universiti Malaya.

Arni Munira, Markom (2016) Erbium-zirconia-yttria-aluminum co-doped fiber for amplifier and nanomaterial based ultrafast laser applications / Arni Munira Markom. PhD thesis, University of Malaya.

Arniza, Fitri (2018) Hydro-morphodynamic responses of detached breakwater in mangrove rehabilitation project / Arniza Fitri. PhD thesis, University of Malaya.

Ashis, Tripathy (2017) Design and development of Ca-Mg-Fe-Ti-oxides based perovskite for high sensitive humidity sensors and wound healing applications / Ashis Tripathy. PhD thesis, University of Malaya.

Asim Hassan, Ali (2013) Influence of crumb rubber modifier on performance characteristics of stone mastic asphalt /Asim Hassan Ali. Masters thesis, University of Malaya.

Asmalina, Mohamed Saat (2016) Synthesis and characterization of partially phosphorylated poly (Vinyl Alcohol) – aluminum phosphate (PPVA – AlPO4) nanocomposite / Asmalina Mohamed Saat. PhD thesis, University of Malaya.

Asna, Mohd Zain (2013) Optimization of solidifications/stabilization for petroleum-based waste using blended cement / Asna Mohd Zain. PhD thesis, University of Malaya.

Asrul, Adam (2017) Selection and optimization of peak features for event-related eeg signals classification / Asrul bin Adam. PhD thesis, University of Malaya.

Aswwinyy, Marimuthu (2022) Optimization of biochar yield using hydrothermal carbonization using response surface methodology for the adsorption of methylene blue / Aswwinyy Marimuthu. Masters thesis, Universiti Malaya.

Aung , Thiha (2020) Suspended carbon nanowire biosensor for rapid and label-free salmonella detection / Aung Thiha. PhD thesis, Universiti Malaya.

Azizul, Islam (2014) Engineering properties of POFA-GGBS-based fiber reinforced structural lightweight geopolymer concrete / Azizul Islam. Masters thesis, University of Malaya.

Azlan Shah, Nerwan Shah @ Nintin (2019) Characterization and stabilization of tropical lowland peats in Banting area, Selangor, Malaysia / Azlan Shah Nerwan Shah @ Nintin. Masters thesis, University of Malaya.

Azmi, Osman (2021) Improvement of the vehicle warm-up performance through low thermal inertia exhaust heat recovery unit / Azmi Osman. Masters thesis, Universiti Malaya.

Azwar, Muhammad Yahya (2017) Modelling and on-line implementation of advanced control strategies for biohydrogen production in microbial electrolysis cell reactor system / Azwar Muhammad Yahya. PhD thesis, University of Malaya.

B

Bahram, Shahedi (2013) Safavid architecture as a historical precedent and design paradigm to the aesthetic of contemporary Iranian architecture / Bahram Shahedi. PhD thesis, University of Malaya.

Balasubramaniam , Karpan (2022) Development of coal-like refused derived fuel from hazardous waste / Balasubramaniam Karpan. PhD thesis, Universiti Malaya.

Baradaran, Saeid (2015) Mechanical and biological evaluations of hydroxyapatite composite for orthopedic applications / Saeid Baradaran. PhD thesis, University of Malaya.

Basem Adnan , Al Khatib (2021) Determining the delay factors for reconstructed mega-project’s phases and the associated challenges / Basem Adnan Al Khatib. PhD thesis, Universiti Malaya.

Behnia, Arash (2015) Characterization of fracture behavior of concrete structural elements using acoustic emission technique / Arash Behnia. PhD thesis, University of Malaya.

Behzad, Shahizare (2017) Performance analysis of vertical axis wind turbine integrated with omni direction-guide-vane / Behzad Shahizare. PhD thesis, University of Malaya.

Belal Ahmed, Abdelaziz Elsayed (2013) Fuzzy sliding mode control for cart Inverted Pendulum system / Belal Ahmed Abdelaziz Elsayed. Masters thesis, University of Malaya.

Belal Gamal, Muthanna Alsubari (2015) Durability characteristics of self-consolidating high strength concrete containing ground palm oil fuel ash as a partial cement replacement / Belal Gamal Muthanna Alsubari. Masters thesis, University of Malaya.

Bidattul Syirat , Zainal (2019) High-rate biological hydrogen and methane production from pome in a two-stage anaerobic hybrid reactor / Bidattul Syirat Zainal. PhD thesis, Universiti Malaya.

Bilal Mouneir, Saeed Eid (2016) Microgrid multi-distributed energy resources for power management network stability / Bilal Mouneir Saeed Eid. PhD thesis, University of Malaya.

Bizhan, Rahmati (2016) Development of tantalum oxide (ta-o) thin film coating on biomedical ti-6al-4v alloy to enhance mechanical and tribological properties, and biocompatibility / Bizhan Rahmati. PhD thesis, University of Malaya.

Bustaman, Tengku Elisa (1999) Analysis of foreign matter materials related to the die attach process of semiconductor device packaging / Tengku Elisa Bustaman. Masters thesis, University of Malaya.

C

Chan, Bee Ting (2013) Fluid-structure simulation of a left ventricle with dilated cardiomyopathy / Chan Bee Ting. Masters thesis, University of Malaya.

Chan , Bee Ting (2018) Image-based flow analysis and fluid structure simulation using 3D computational models of myocardial infarction patients / Chan Bee Ting. PhD thesis, University of Malaya.

Chandra, Bhusan Roy (2016) Investigation of tidal stream energy in the straits of Malacca / Chandra Bhushan Roy. Masters thesis, University of Malaya.

Chandra Latha , Ramachandran (2021) Memory retention for multilingual note taking platform / Chandra Latha Ramachandran. Masters thesis, Universiti Malaya.

Chang, Kian Boon (2014) Development of a design rainfall model using ams and pds in Peninsular Malaysia / Chang Kian Boon. Masters thesis, University of Malaya.

Chang , Wen Liang (2018) Seed disperser ant algorithm for optimization / Chang Wen Liang. Masters thesis, Universiti Malaya.

Cheah, Aik Keong (2011) Optimisation of wire electrical discharge machining process using DF2 tool steel material / Cheah Aik Keong. Masters thesis, University of Malaya.

Chen, Long (2017) Wake of horizontal axis tidal-current turbine and its effects on scour / Chen Long. PhD thesis, University of Malaya.

Chew , See Khai (2023) Rutin extraction from the leaf of female carica papaya Linn. using microwave and ultrasound assisted extractive methods / Chew See Khai. Masters thesis, Universiti Malaya.

Chew , Sue Ping (2020) Multimode-interference based optical fiber sensor for civil structures monitoring / Chew Sue Ping. PhD thesis, Universiti Malaya.

Chia, Shir Reen (2019) Design and implementation of phlorotannin extraction processing technique from seaweed / Chia Shir Reen. Masters thesis, University Malaya.

Chia , Yu Huat (2024) Theory-guided machine learning for predicting and minimising surface settlement caused by the excavation of twin tunnels / Chia Yu Huat. PhD thesis, Universiti Malaya.

Choi, Fook Choon (2001) Characterisation of reinforced concrete beams subjected to reinforcement corrosion using modal parameters / Choi Fook Choon. Masters thesis, Universiti Malaya.

Chong , Kai Lun (2021) Development of a multi criteria decision support system using convolutional neural network and jaya algorithm for water resources management / Chong Kai Lun. PhD thesis, Universiti Malaya.

Choo , Min Yee (2021) Deoxygenation of algae oil over nickel-based nanoparticles supported on zeolite Y / Choo Min Yee. PhD thesis, Universiti Malaya.

Choong, Joo Ee (2019) Quantification of potential environmental impacts of electricity generation from the wood wastes using life cycle assessment approach / Choong Joo Ee. Masters thesis, University of Malaya.

Choong , Choe Earn (2018) Magnesium silicate impregnation on palm-shell activated carbon powder for enhanced heavy metal adsorption / Choong Choe Earn. PhD thesis, University of Malaya.

Chuah, Shoon Hui (2020) Phenotyping of hypertensive heart disease and hypertrophic cardiomyopathy using personalized 3D modeling and cardiac magnetic resonance imaging / Chuah Shoon Hui. Masters thesis, Universiti Malaya.

Cindy, Chai (2012) Rehabilitation of Sg Kembong open dumpsite using Geographic Information System: A case study / Cindy Chai. Masters thesis, University of Malaya.

D

Dasmond Roy , Philips (2024) Location accuracy improvement in bluetooth low energy based indoor positioning system for remote asset monitoring / Dasmond Roy Philips. Masters thesis, Universiti Malaya.

Devindraan , Sirkkunan (2024) Application of magnetic anchors to align collagen fibres for axonal guidance / Devindraan Sirkkunan. PhD thesis, Universiti Malaya.

Dng, Lai Chet (2012) Case study of air distribution of the hospital operating room in Malaysia / Dng Lai Chet. Masters thesis, University of Malaya.

E

Ebrahim Ali , Ahmed Al-Fakih (2015) Design and development of a fiber bragg grating-based technique for interface pressure measurement inside below-knee prosthetic sockets / Ebrahim Ali Ahmed Al-Fakih. PhD thesis, University of Malaya.

Ebubeogu Amarachukwu , Felix (2020) Supervised optimal decision machine learning approach to class- and method-level data preprocessing towards effective software defect prediction / Ebubeogu Amarachukwu Felix. PhD thesis, Universiti Malaya.

Edwind , Liaw Yee Kang (2017) Computer vision based traffic signs recognition system / Edwind Liaw Yee Kang. Masters thesis, University of Malaya.

Elyana , Kosri (2024) Three-dimensional carbon interdigitated ring array with nanofibers as biosensor for dopamine neurotransmitter / Elyana Kosri. PhD thesis, Universiti Malaya.

Erik Nino, Tolentino (2020) Comparison of pressure-assist silver sintering to tin silver solder alloy as die attach material in high power semiconductor / Erik Nino Tolentino. Masters thesis, University of Malaya.

Eshraghi, Arezoo (2014) Design, development and clinical evaluation of a new prosthetic suspension system for lower limb amputees / Arezoo Eshraghi. PhD thesis, University of Malaya.

Eugene Soo , Zhen Xiang (2020) Evaluation and inter-comparison of satellite precipitation estimations for extreme flood events in Peninsular Malaysia / Eugene Soo Zhen Xiang. PhD thesis, Universiti Malaya.

F

Farahin , Mohd Jais (2017) Development of effective modified palm shell waste-based activated carbon adsorbents for pollutants removal / Farahin Mohd Jais. Masters thesis, University of Malaya.

Farhana, Arzu (2018) Numerical modelling of horizontal axis tidal turbine with variable length blade / Farhana Arzu. Masters thesis, Universiti Malaya.

Farhang , Salari (2024) Performance appraisal of palm oil clinker as cement and sand replacement materials in foamed concrete / Farhang Salari. PhD thesis, Universiti Malaya.

Farid Esmaeili , Motlagh (2018) Evaluation of neurophysiological properties among methadone treatment subjects: EEG and ERP study / Farid Esmaeili Motlagh. PhD thesis, University of Malaya.

Farihah, Shariff (2015) An on-line photovoltaic monitoring system using the zigbee based wireless network / Farihah Shariff. Masters thesis, University of Malaya.

Farihahusnah, Hussin (2013) Acid activation of bleaching earth for crude palm oil treatment / Farihahusnah Hussin. Masters thesis, University of Malaya.

Farihahusnah , Hussin (2018) Solar powered electrocoagulation processes for PB(II) removal using novel electrode materials and configurations / Farihahusnah Hussin. PhD thesis, University of Malaya.

Fauziah, Arshad (2016) Life cycle assessment of the handling and transportation of palm oil, palm olein and palm stearin / Fauziah Arshad. Masters thesis, University of Malaya.

Febry Yadi, Zainal (2017) Real-time monitoring and control of water pump system / Febry Yadi Zainal. Masters thesis, University Malaya.

Firdaus, Ghazali (2013) Investigation of electro-coagulation process for the reduction of total suspended solids from palm oil mill effluent / Firdaus Ghazali. Masters thesis, University of Malaya.

Fuad Y. M. , Abutaha (2018) Engineering properties of normal and high strength concrete containing palm oil clinker / Fuad Y. M. Abutaha. PhD thesis, University of Malaya.

G

Gaeid, Khalaf Salloum (2012) Wavelet based fault tolerant control of induction motor / Khalaf Salloum Gaeid. PhD thesis, University of Malaya.

Gan, Jia Jiun (2020) A study on the performance of University Malaya campus bus service using dwell time model and passenger distribution analysis / Gan Jia Jiun. Masters thesis, University of Malaya.

Gan, Teck Wan (2012) Finite element analysis and experiemental verification of polymer melt temperature and product shrinkage in injection molding / Gan Teck Wan. Masters thesis, University of Malaya.

Gan , Yong Yang (2020) Dry and wet torrefaction of microalgal biomass for biochar production as bioenergy sources / Gan Yong Yang. PhD thesis, Universiti Malaya.

Goyal, Rahul Kumar (2011) Extraction of chromium from wastewater by emulsion ionic liquid membrane / Rahul Kumar Goyal. Masters thesis, Universiti Malaya.

H

Haider, Hawar A. M. (2011) Absorption of carbon dioxide in methylamino ethanol / Hawar A. M. Haider. Masters thesis, Universiti Malaya.

Haiyam Mohammed , Abdalraheem Alayan (2018) Synthesis of carbon nanomaterials on impregnated powdered activated carbon for removal of organic compounds from water / Haiyam Mohammed Abdalraheem Alayan. PhD thesis, University of Malaya.

Hakimeh, Wakily (2012) Colloidal filtration of alumina-zirconia with solid oxide additives / Hakimeh Wakily. Masters thesis, University of Malaya.

Haliza, Abdul Aziz (2018) Fatty esteramine production via heterogeneous transesterification of palm based methyl palmitate and triethanolamine / Haliza Abdul Aziz. Masters thesis, University of Malaya.

Hamed , Pourzolfaghar (2021) Catalytic gas-phase hydrodeoxygenation of phenol over silica supported zinc catalysts at atmospheric pressure / Hamed Pourzolfaghar. PhD thesis, Universiti Malaya.

Hamidreza, Golabi (2015) Effect of joint flexibility on the nonlinear static and dynamic behaviour of offshore jacket platforms / Hamidreza Golabi. Masters thesis, University of Malaya.

Hamidreza, Hashamdar (2012) An efficient method for nonlinear dynamic analysis of 3D space structures /Hamidreza Hashamdar. PhD thesis, University of Malaya.

Hamisu Umar , Farouk (2019) Effect of chloride and sulfate ions on deactivation of TiO2 anatase in photocatalytic treatment of methylene blue and methyl orange / Hamisu Umar Farouk. PhD thesis, Universiti Malaya.

Hamza, Al Kouzbary (2021) Generating an adaptive and robust walking pattern for prosthetic ankle-foot utilizing a nonlinear autoregressive network with exogenous inputs / Hamza Al Kouzbary. Masters thesis, Universiti Malaya.

Hanie Nadia , Shasmin (2012) Development of a new pylon material in transtibial prosthesis / Hanie Nadia Shasmin. Masters thesis, University of Malaya.

Hanisah , Bakeri (2024) Soft pneumatic actuator for lower limb rehabilitation: Development and its efficacy in reducing muscle stiffness and pain / Hanisah Bakeri. Masters thesis, Universiti Malaya.

Hany Hazfiza , Manap (2020) Fuzzy logic based control for membrane oxygenator in blood purification process / Hany Hazfiza Manap. PhD thesis, Universiti Malaya.

Harinivas Rao , Suba Rao (2024) Investigation of muscle strength in long covid patients based on mechanomyography / Harinivas Rao Suba Rao. Masters thesis, Universiti Malaya.

Haryani , Azahari (2013) Reuse of polyethylene scrap as building material for plastic waste minimisation / Haryani Azahari. Masters thesis, University Of Malaya.

Hasan Fouzi , Salem Gafri (2019) Membranes enhanced anti-biofouling properties by chitosan and chitosan-powder activated carbon composite / Hasan Fouzi Salem Gafri. PhD thesis, University of Malaya.

Hawaiah Imam , Maarof (2022) Electrochemical removal of mercury from aqueous solution using task-specific ionic liquid immobilised on palm shell activated carbon / Hawaiah Imam Maarof. PhD thesis, Universiti Malaya.

Haziratul Mardhiah, Hamdan (2017) Biodiesel synthesis via heterogeneous carbon acid catalysis from de-oiled jatropha curcas waste / Haziratul Mardhiah Hamdan. Masters thesis, University of Malaya.

Hazli Rafis, Abdul Rahim (2017) Structured growth of zinc oxide nanorods on plastic optical fiber and light side coupling towards sensing applications / Hazli Rafis Abdul Rahim. PhD thesis, University of Malaya.

Hazmimi , Kasim (2019) Development of matrix assessment level of safety practice for radiation risk in Malaysian radiation facilities / Hazmimi Kasim. PhD thesis, Universiti Malaya.

Herda Yati, Katman (2016) Rutting resistance of SMA mixtures incorporating crumb rubber / Herda Yati Katman. PhD thesis, University of Malaya.

Herman , Tawil (2024) Behaviour of S-types shear connector in composite precast concrete sandwich wall panels / Herman Tawil. PhD thesis, Universiti Malaya.

Hesham Hanie, Youssef (2020) Optimal distribution system reconfiguration incorporating dg and variable load profile using artificial neural network / Hesham Hanie Youssef. Masters thesis, Universiti Malaya.

Ho, Kar Wei (2013) Fouling behaviour during ultrafiltration of skim latex / Ho Kar Wei. Masters thesis, University of Malaya.

Ho, Yong Kuen (2011) Adaptive-model based self-tuning generalized predictive control of a biodiesel reactor / Ho Yong Kuen. Masters thesis, University of Malaya.

Hoda, Shafaghat (2016) Transformation of phenolic compounds of pyrolysis bio-oil to high-value chemicals by catalytic hydrotreatment / Hoda Shafaghat. PhD thesis, University of Malaya.

Hooman , Monajemi (2018) Model updating and damage detection of frame structures using output-only measurements / Hooman Monajemi. PhD thesis, University of Malaya.

Hossain, Mohammad Sajid (2013) Optical properties and mathematical model for water based Alumina & Titania nanofluids / Mohammad Sajid Hossain. Masters thesis, University of Malaya.

Houriyeh , Marashi (2016) Enhancing electrical discharge machining performance through employment of titanium nanopowder mixed dielectric and severe plastic deformation of electrode / Houriyeh Marashi. PhD thesis, University of Malaya.

Hoveizavi, Fatemeh Banitorfian (2011) Design of capacitive sensor interfacing circuit using 0.18 μm complementary metal oxide semiconductor technology / Fatemeh Banitorfian Hoveizavi. Masters thesis, University of Malaya.

How , Seow Wah (2020) Process improvement and microbial characterisation of biological nitrogen removal for tropical wastewater with low chemical oxygen demand/nitrogen ratio / How Seow Wah. PhD thesis, Universiti Malaya.

Hung, Yew Mun (2002) Strained quantum well heterostructure : modeling and simulation of 980 nm laser / Hung Yew Mun. Masters thesis, University of Malaya.

Hussain, Fayaz (2013) Thermal, economic and environmental analysis of domestic solar water heaters in Malaysia / Fayaz Hussain. Masters thesis, University of Malaya.

Huzaifa, Hashim (2017) Soil liquefaction hazard assessment along shoreline of Peninsular Malaysia / Huzaifa Hashim. PhD thesis, University of Malaya.

I

Ibitoye, Morufu Olusola (2017) Mechanomyography for neuromuscular electrical stimulation feedback applications in persons with spinal cord injury / Ibitoye Morufu Olusola. PhD thesis, Universiti Malaya.

Ibrahim Amer , Ibrahim (2019) Auditory evoked potential in normal hearing and sensorineural hearing loss among Malay and Chinese adults / Ibrahim Amer Ibrahim. PhD thesis, Universiti Malaya.

Ida Hasni , Shaari (2020) Immediate effects of dynamic lycra® orthosis on sitting to standing ability children with cerebral palsy / Ida Hasni Shaari. PhD thesis, Universiti Malaya.

Iftekhair, Ibnul Bashar (2014) Evaluation of mechanical and fracture behaviour of POFA-FA-Metakaolin based geopolymer fibre reinforced concrete / Iftekhair Ibnul Bashar. Masters thesis, University of Malaya.

Ikeh Bleshius , Obinna (2024) A study on first-mile mode choice to Mass Rapid Transit System in Klang Valley / Ikeh Bleshius Obinna. Masters thesis, Universiti Malaya.

Iman , Mazinani (2021) Experimental and computational studies of fluid structure interaction of tsunami bore on coastal bridges / Iman Mazinani. PhD thesis, Universiti Malaya.

Indrastuti, - (2014) Unit cost modelling of public building project in Kepulauan Riau- Indonesia / Indrastuti. PhD thesis, University of Malaya.

Irwan, Nurdin (2016) Synthesis, characterization, and thermophysical properties of maghemite (γ-Fe2O3) nanofluids with and without magnetic fields effect / Irwan Nurdin. PhD thesis, University of Malaya.

Ismail, M. I. Qeshta (2014) Use of wire mesh-epoxy composite for strengthening concrete beams /Ismail M. I. Qeshta. Masters thesis, University of Malaya.

J

Jannatul , Naeem (2021) Development of functional electrical stimulation system using mechanomyography as muscle state feedback for paraplegics / Jannatul Naeem. PhD thesis, Universiti Malaya.

Jarinah , Mohd Ali (2017) Hybrid fuzzy-sliding mode observer design for estimation and advanced control of an ethylene polymerization process / Jarinah Mohd Ali. PhD thesis, University of Malaya.

Jassim Kadim, Hmood (2016) Analysis and mitigation of nonlinear fiber impairments in high bit rate all-optical orthogonal frequency division multiplexing system / Jassim Kadim Hmood. PhD thesis, University of Malaya.

Javed, Ahmed Laghari (2012) A fuzzy based load frequency control and load shedding scheme for islanded distribution network connected with mini-hydro /Javed Ahmed Laghari. Masters thesis, University of Malaya.

Jayaprina , Gopalan (2024) Synthesis, characterization and CO2 adsorption performance analysis of MgO functionalized activated carbon from palm kernel Shell / Jayaprina Gopalan. Masters thesis, Universiti Malaya.

Jayasaegaran , Sithambaram (2021) An agile best practice framework for information technology project management / Jayasaegaran Sithambaram. PhD thesis, Universiti Malaya.

Jegathish , Kanadasan (2016) Feasibility study of palm oil clinker as environmentally friendly self-compacting concrete / Jegathish Kanadasan. PhD thesis, University of Malaya.

Justin Gerard, K. Gerard (2015) Role of current density in impress current cathodic protection of stainless steel in 3.5% NaCI solution / Justin Gerard K. Gerard. Masters thesis, University of Malaya.

K

K. Narrein, Krishnasamy (2016) Numerical study of heat transfer and fluid flow characteristics in microchannel heat sink / K. Narrein Krishnasamy. PhD thesis, University of Malaya.

Kalyani , Bahskaran (2021) Measuring aircraft altimetry system error using automatic dependent surveillance-broadcast data / Kalyani Bahskaran. Masters thesis, Universiti Malaya.

Kang , Yee Li (2016) Enhancement of microbial fuel cell anode through functionalization of conductive polymer / Kang Yee Li. PhD thesis, University of Malaya.

Katesari, Seyedeh Maryam Masoumi (2015) Development of a strategic prioritisation model for green supply chain improvement initiatives in manufacturing industry / Seyedeh Maryam Masoumi Katesari. PhD thesis, University of Malaya.

Keshasni , Earichappan (2023) The development of Muscle Fatigue Prediction model from muscle torque and contraction data / Keshasni Earichappan. Masters thesis, Universiti Malaya.

Kh Tohidul , Islam (2017) Real-time vision-based Malaysian road sign recognition using an artificial neural network / Kh Tohidul Islam. Masters thesis, Universiti Malaya.

Kh. Mahfuz , Ud Darain (2016) Strengthening performance of reinforced concrete beam using combined externally bonded and near surface mounted techniques / Kh. Mahfuz Ud Darain. PhD thesis, University of Malaya.

Khairiah , Mohd Mokhtar (2021) Explosion characteristics of aluminium and silver particles in various sizes and concentrations for a confined and vented system / Khairiah Mohd Mokhtar. PhD thesis, Universiti Malaya.

Khairunisa , Md Nasir (2021) Performance of waterborne intumescent coating with hybrid industrial and biofillers for steel protection / Khairunisa Md Nasir. PhD thesis, Universiti Malaya.

Khaled , Ghaedi (2020) Performance of a new passive damper for seismic protection of structures / Khaled Ghaedi. PhD thesis, Universiti Malaya.

Khaled Nedal, Mahmoud Sobh (2018) The positional parameter of EMG for transtibial prosthetic users / Khaled Nedal Mahmoud Sobh. Masters thesis, Universiti Malaya.

Khew , Gabriel Mun Hong (2021) Fuzzy logic control of biohydrogen production using microbial electrolysis cell (MEC) reactor for storage application / Khew Mun Hong, Gabriel. Masters thesis, Universiti Malaya.

Khoo, Shin Yee (2013) Enhancement of impact force determination with modal transformation method by using integration and data filtering /Khoo Shin Yee. PhD thesis, University of Malaya.

Kong , Pei San (2018) A novel hydrophobic ZrO2-SiO2 based heterogeneous acid catalyst for the esterification of glycerol with oleic acid / Kong Pei San. PhD thesis, University of Malaya.

Kow, Siew Ting (2009) Monolithic integration of glass-based optical devices via solution doping of erbium rare-earth material / Kow Siew Ting@Koh Siew Ting. Masters thesis, University of Malaya.

Ku , Pei Xuan (2016) Biomechanical evaluation of postural stance stability / Ku Pei Xuan. PhD thesis, University of Malaya.

Ku Nurul Edhura , Ku Ahamad (2013) An effective islanding detection method for photovoltaic grid connected inverter / Ku Nurul Edhura Ku Ahamad. Masters thesis, University of Malaya.

Kuppusamy, Vijayandren (2010) Mechanical and thermodynamic properties of bacteriorhodopsin langmuir film / Vijayandren Kuppusamy. Masters thesis, University of Malaya..

L

Lai, Chi Yi (2021) Design of low power, high linearity down-conversion CMOS mixer for industrial, scientific and medical applications at 900 MHz / Lai Chi Yi. Masters thesis, Universiti Malaya.

Laleh, Bahadori (2015) An evaluation of deep eutectic solvents for charge/discharge tests using all-vanadium redox couples for flow batteries / Laleh Bahadori. PhD thesis, University of Malaya.

Law , Foong Li (2019) A tacit knowledge sharing model to enhance stakeholder engagement in requirements elicitation / Law Foong Li. PhD thesis, Universiti Malaya.

Layth Abdulateef, Hashim (2011) Synthesis of nanostructure active pharmaceutical ingredients for isoniazid and griseofulvin by cryogenic technology / Layth Abdulateef Hashim. Masters thesis, University of Malaya.

Lee, Albert Phiaw Seong. (2003) Lasing characteristics of [beta]-diketoboronates / Albert Lee Phiaw Seong. Masters thesis, University of Malaya.

Lee, Soon Li (2016) Effects of nanoparticle aggregation, particle size and temperature of nanofluids using molecular dynamics simulation / Lee Soon Li. PhD thesis, University of Malaya.

Lee , Jin Chai (2018) Engineering properties and shear behaviour of high strength lightweight aggregate concrete incorporating oil-palm-boiler clinker / Lee Jin Chai. PhD thesis, University of Malaya.

Lee , Ru Bin (2018) Photo-catalytic degradation of dye by using raw and pre-treated ilmenite / Lee Ru Bin. Masters thesis, University of Malaya.

Lee , Siew Cheng (2018) Application of geotube breakwater for muddy coastline protection in Peninsular Malaysia / Lee Siew Cheng. PhD thesis, University of Malaya.

Leong, Kah Hon (2015) Development of modified titania nano photocatalysts to synergise visible light utilisation for enhanced photocatalysis / Leong Kah Hon. PhD thesis, University of Malaya.

Leong, Siong Hean (2017) Behavior of reverse top-seat angle connection at ambient and elevated temperatures / Leong Siong Hean. PhD thesis, University of Malaya.

Leong, Siong Hean (2013) Numerical investigation of top-seat angle connections at elevated temperatures / Leong Siong Hean. Masters thesis, University of Malaya.

Leong , Chew Lee (2024) A pilot scale study of low dissolved oxygen oxic-anoxic process for biological nitrogen removal from tropical sewage / Leong Chew Lee. Masters thesis, Universiti Malaya.

Leong , Chin Neng (2020) Electromechanics modelling of the effects of myocardial infarction on left ventricular remodelling / Leong Chin Neng. PhD thesis, Universiti Malaya.

Leow, Hoi Mien (2001) The effect of aluminium oxide and cerium oxide as dispersoids in chitosan-lithium acetate complexes / Leow Hoi Mien. Masters thesis, Universiti Malaya.

Lian, Yee Cheng (2015) Air flow buoyancy surrounding buildings in Malaysia / Lian Yee Cheng. Masters thesis, University of Malaya.

Liang, Mei Keat (2002) Oxidation-induced stacking fault in (100) and (111) silicon wafers / Liang Mei Keat. Masters thesis, University of Malaya.

Liang , Kim Meng (2020) An improved bone age assessment using advanced image processing and deep learning approach / Liang Kim Meng. PhD thesis, Universiti Malaya.

Liew , Shaer Jin (2024) Development of computerized wood veneer colour sorting system for wood industry / Liew Shaer Jin. Masters thesis, Universiti Malaya.

Lim, Xin Le (2015) Feasibility study on implementation of marine renewable energy in Malaysia by considering the project costs and urban public acceptance / Lim Xin Le. Masters thesis, University of Malaya.

Lim , Pooi Khoon (2020) Artifact identification for blood pressure and photoplethysmography signals in an unsupervised environment / Lim Pooi Khoon. PhD thesis, Universiti Malaya.

Lin , Ying (2024) Engineering properties of mortar and concrete using eco-processed pozzolan as partial cement replacement material / Lin Ying. PhD thesis, Universiti Malaya.

Liu, Kit Fook (2017) Detection of defect in concrete using elastic wave tomography reconstruction technique / Liu Kit Fook. Masters thesis, University of Malaya.

Liza, Ferina (2013) Optimization of aqueous Remazol Brilliant Blue R (RBBR) decolorization by trametes sp. pellets in Fluidized Bed Biological Reactor (FBBR) / Liza Ferina. Masters thesis, University of Malaya.

Loay , Aladib (2017) Detecting design pattern and tracing its design rationale / Loay Aladib. Masters thesis, Universiti Malaya.

Loh , Zhi Pin (2019) Investigation of ternary blended binder PVA fibre reinforced cementitious composites as repair material / Loh Zhi Pin. Masters thesis, Universiti Malaya.

Loi , Jia Xing (2024) Downflow sponge biofilm reactor for ammonia removal in raw water treatment / Loi Jia Xing. PhD thesis, Universiti Malaya.

Loo, Zi Zhen (2018) Characterisation and properties of calcium phosphate bioceramic derived from animal bones / Loo Zi Zhen. Masters thesis, University of Malaya.

Loo , Wei Kit (2024) Hospital readmission risk prediction of COVID-19 patients using machine learning / Loo Wei Kit. PhD thesis, Universiti Malaya.

Low, Tian Huat (2001) Water infiltration study on slopes / Low Tian Huat. Masters thesis, University of Malaya.

Lubabatu, Baballe Ila (2015) Design and development of A 3-Degree of freedom parallel manipulator / Lubabatu Baballe Ila. Masters thesis, University of Malaya.

Lubna Ghalib, Abdulkhaleq (2016) A mechanistic model for carbon steel corrosion rate in aqueous carbonated solution of activated mdea and activated dea / Lubna Ghalib Abdulkhaleq. PhD thesis, University of Malaya.

Luo, Dong (2013) Assessment of tapered plastic fiber sensors in the applications of structural health monitoring / Luo Dong. PhD thesis, University of Malaya.

M

M. , Obaydullah (2021) Strengthening of prestressed concrete beams using combined externally bonded and prestressed near surface mounted technique / M. Obaydullah. PhD thesis, Universiti Malaya.

Mahdi Ezwan, Mahmoud (2012) Fabrication and characterization of nano-TiO[2] thin films from local mineral precursors / Mahdi Ezwan Mahmoud. Masters thesis, University of Malaya.

Mahdi Zeinizadeh, Jeddi (2017) Experimental investigations on novel double-sleeve tubebolt moment connection to concrete filled tubular column / Mahdi Zeinizadeh Jeddi. PhD thesis, University of Malaya.

Mahmoudi, Mohadeseh (2012) Physical attributes of streetscape in the inner city of Kuala Lumpur: Case study of Bukit Bintang Street and Tun Perak Street / Mohadeseh Mahmoudi Mohadeseh Mahmoudi. Masters thesis, University of Malaya.

Mahsa Sadegh , Pour (2019) Modified polyethylene glycol as a potential material for CO2 capture / Mahsa Sadegh Pour. PhD thesis, Universiti Malaya.

Maisarah, Lutfi (2012) Hybrid microwave sintering of Zinc Aluminum Alloy / Maisarah Lutfi. Masters thesis, University of Malaya.

Manoj , Tripathi (2016) Microwave pyrolysis of oil palm shell for supercapacitor applications / Manoj Tripathi. PhD thesis, University of Malaya.

Maria , Touri (2020) Modeling, fabrication and characterization of coated calcium phosphate scaffolds produced by 3D-Printing for tissue engineering application / Maria Touri. PhD thesis, Universiti Malaya.

Maryam, Khazaee (2015) Influence of Timurid architecture on Safavid and Mughal mosques in India / Maryam Khazaee. PhD thesis, University of Malaya.

Maryam , Mousavi (2018) Scheduling of automated guided vehicles in a flexible manufacturing system / Maryam Mousavi. PhD thesis, University of Malaya.

Mashahi Khalafalla , Dafaalla Abdelrahman (2020) Enhancing the performance of IR-based traceability recovery of requirement artifacts using noun phrases / Mashahi Khalafalla Dafaalla Abdelrahman. Masters thesis, Universiti Malaya.

Mathivanan, Lakshmanan (1998) Study of high temperature heat resistant coating / by Lakshmanan Mathivanan. PhD thesis, University of Malaya.

Md Abdul , Quader (2015) A hybrid multi-criteria analysis of energy efficient CO2 iron making technologies with carbon capture and storage / Md Abdul Quader. Masters thesis, University of Malaya.

Md Akter , Hosen (2019) Efficient side near surface mounting techniques for strengthening of reinforced concrete beams / Md Akter Hosen. PhD thesis, Universiti Malaya.

Md Haidar, Islam (2021) A PI based coordinated maximum power point tracking controller for grid connected photovoltaic system / Md Haidar Islam. Masters thesis, Universiti Malaya.

Md Ibnul , Adib (2021) Fatigue predictive model for mid-air gesture interaction / Md Ibnul Adib. Masters thesis, Universiti Malaya.

Md Ovik, Raihan (2018) Enhancement of thermoelectric properties for doped skutterudites based on CoSb3 through ball milling parametric optimization / Md Ovik Raihan. Masters thesis, University of Malaya.

Md Zahid , Hossain Khan (2022) Performance characteristics of crumb rubber modified asphalt mixed with reclaimed asphalt pavement and waste engine oil / Md Zahid Hossain Khan. Masters thesis, Universiti Malaya.

Md. Akter, Hosen (2015) Structural performance of RC beams strengthened with NSM (soffit and side) / Md. Akter Hosen. Masters thesis, University of Malaya.

Md. Alhaz , Uddin (2012) Nonlinear response prediction of spar platform using artificial neural network / Md. Alhaz Uddin. Masters thesis, University of Malaya.

Md. Arafat, Mahmood (2012) Effects of molybdenum nanoparticles on lead-free tin-based solder / Md. Arafat Mahmood. Masters thesis, University of Malaya.

Md. Arafat, Mahmood (2017) Growth, characterization and gas sensing properties of one dimensional oxide nanostructures on Ti and Ti-6Al-4V alloy substrates synthesized by thermal oxidation / Md. Arafat Mahmood. PhD thesis, University of Malaya.

Md. Atiqul , Islam (2016) Robust speaker identification based on neural response in clean and noisy conditions / Md. Atiqul Islam. PhD thesis, University of Malaya.

Md. Imran, Hosen (2012) A comprehensive approach of groundwater vulnerability and potentiality assessment of Melaka catchment in Malaysia / Md. Imran Hosen. Masters thesis, University of Malaya.

Md. Jakirul , Islam (2013) Prediction technique on the effect of human motion on indoor radio wave propagation / Md. Jakirul Islam. Masters thesis, University of Malaya.

Md. Mofijur , Rahman (2013) Performance analysis of palm, jatropha and moringa biodiesels in a diesel engine / Md. Mofijur Rahman. Masters thesis, University of Malaya.

Md. Moshiur, Rahman (2016) Structural hybridization and economical optimization of strengthening systems used for concrete beams / Md. Moshiur Rahman. PhD thesis, University of Malaya.

Md. Rabiul, Islam (2018) Soil erosion prediction based on ANFIS and RUSLE model / Md. Rabiul Islam. Masters thesis, University of Malaya.

Md. Rubel , Basar (2017) Resonant inductive wireless power transfer system for wireless capsule endoscopy application / Md. Rubel Basar. PhD thesis, University of Malaya.

Md. Sakinul, Islam (2012) Characterization of degradation products of activated diethanolamine and methyldiethanolamine during carbon dioxide absorption and desorption processes / Md. Sakinul Islam. Masters thesis, University of Malaya..

Md. Shouquat , Hossain (2012) Thermal performance and economic analysis of solar photovoltaic water heater under the Malaysian climatic condition / Md. Shouquat Hossain. Masters thesis, University of Malaya.

Md. Sohel, Rana (2015) Tikhonov based well-conditioned asymptotic waveform evaluation technique for heat conduction / Md. Sohel Rana. Masters thesis, University of Malaya.

Md. Sumon, Sarker (2011) An efficient model for indoor radio signal prediction and coverage estimation / Md. Sumon Sarker. Masters thesis, University of Malaya.

Md. Tariqul, Islam (2015) CFD study of formation and rise characteristics of a single bubble in bubble column / Md.Tariqul Islam. Masters thesis, University of Malaya.

Md. Zahidul Islam , Bhuiyan (2012) Interface shear capacity of facing units of geosynthetic-reinforced segmental retaining walls / Md.Zahidul Islam Bhuiyan. Masters thesis, University of Malaya.

Md.Nazmul , Huda (2017) Behavior of flexural members made from oil palm shell and clinker concrete / Md. Nazmul Huda. Masters thesis, University of Malaya.

Megat Muhammad Ikhsan , Megat Hasnan (2014) Design of high force density fishbone-shaped electrostatic actuator using finite element / Megat Muhammad Ikhsan Megat Hasnan. Masters thesis, University of Malaya.

Mehdi, Maghfouri (2019) Optimum oil palm shell content as coarse aggregate in concrete based on mechanical and drying shrinkage properties / Mehdi Maghfouri. Masters thesis, University of Malaya.

Mehdi , Zomorodian (2018) Development and application of a dynamic conflict resolution method for integrated water resources management / Mehdi Zomorodian. PhD thesis, University of Malaya.

Mehran , Homayounfar (2018) Multi-model integration in a decision support system as an approach for river basin management / Mehran Homayounfar. PhD thesis, University of Malaya.

Mehrtash , Soltani (2016) Evaluating the performance of W-beam guardrail roadside safety barrier systems / Mehrtash Soltani. PhD thesis, University of Malaya.

Meisam , Gordan (2020) Data mining for structural damage identification using hybrid artificial neural network based algorithm for beam and slab girder / Meisam Gordan. PhD thesis, Universiti Malaya.

Meor Mohd Adli, Taib (2020) Effects of new and recycle flux on the mechanical properties of submerged arc welded (SAW) line pipe grade X52M and X65M / Meor Mohd Adli Taib. Masters thesis, University Malaya.

Meysam, Davoody (2017) Solid suspension and gas dispersion in gas-solid-liquid stirred vessels with high solid concentration / Meysam Davoody. PhD thesis, University of Malaya.

Michael Liu, Yong Jing (2014) Microstructure, mechanical and thermal characteristics of foamed geopolymer concrete using fly ash and palm oil fuel ash as binders / Michael Liu Yong Jing. Masters thesis, University of Malaya.

Mitra Asadi, Eydivand (2016) Three dimensional printing of bone tissue engineering scaffold: Design, structure, and mechanical properties / Mitra Asadi-Eydivand. PhD thesis, University of Malaya.

Mo, Kim Hung (2015) Performance of structural lightweight oil palm shell concrete incorporating high volume ground granulated blast furnace slag / Mo Kim Hung. PhD thesis, University of Malaya.

Moatasem, Mohammed Fayyadh (2012) Structural assessment of damaged and CFRP repaired reinforced concrete beams from experimental modal analysis / Moatasem Mohammed Fayyadh. PhD thesis, University of Malaya.

Moayad Hani Yacoub , Abu Rmilah (2016) An integrated simulation platform for a quadcopter system with fuzzy-tuned PID controllers / Moayad Hani Yacoub Abu Rmilah. Masters thesis, University of Malaya.

Moe , Win (2018) Development of mesoscopic imaging system for surface inspection / Moe Win. PhD thesis, University of Malaya.

Mohamad Hilman , Nordin (2012) Development of instrumentation and simulation of regenerative motor-pump system for hydraulic hybrid vehicle / Mohamad Hilman Nordin. Masters thesis, University of Malaya.

Mohamad Rosman, Othaman (2020) Evaluation of mechanical properties of Malaysia local source wood for electric cruiser board applications / Mohamad Rosman Othaman. Masters thesis, University of Malaya.

Mohamed Afifuddeen, Mohamed Nizam (2021) Biomechanical mechanical and clinical analysis on the improvement of prosthetic liner using polyurethane on anterior distal part of the residual limb / Mohamed Afifuddeen Mohamed Nizam. Masters thesis, Universiti Malaya.

Mohamed Hamid , Elsheikh Yousef (2016) Thermoelectric properties of novelmicrostructurally modifiedcosb3skutterudite materials by minor dopants of Mn, Hf, Al, Bi and Yb / Mohamed Hamid Elsheikh Yousef. PhD thesis, University of Malaya.

Mohamed Khalid, Mohamed Saied (2017) Removal of heavy metals from water using carbon nanotubes functionalized with deep eutectic solvents / Mohamed Khalid Mohamed Saied. PhD thesis, University of Malaya.

Mohammad, Dabbagh (2015) An integrated approach for simultaneous prioritization of functional and nonfunctional requirements / Mohammad Dabbagh. PhD thesis, University of Malaya.

Mohammad, Mohammadhassani (2012) Structural behaviour of high strength self compacting concrete deep beams / Mohammad Mohammadhassani. PhD thesis, University of Malaya.

Mohammad , Hashemi (2019) Engineering characteristics of modified roller- compacted concrete pavement / Mohammad Hashemi. PhD thesis, Universiti Malaya.

Mohammad , Pourtousi (2016) CFD modelling and anfis development for the hydrodynamics prediction of bubble column reactor ring sparger / Mohammad Pourtousi. PhD thesis, University of Malaya.

Mohammad Ashraful , Alam (2016) Analysis of particulate matter, carbon emissions and elemental compositions from A diesel engine exhaust fuelled with diesel-biodesel blends / Mohammad Ashraful Alam. Masters thesis, University of Malaya.

Mohammad Hossein, Mehrabi (2020) Hybrid passive control system for seismic response mitigation of steel frame structures / Mohammad Hossein Mehrabi. PhD thesis, Universiti Malaya.

Mohammad Jakir, Hossain Khan (2017) Polypropylene production in a fluidised BED catalytic reactor: Comprehensive modeling, optimisation and pilot scale experimental validation / Mohammad Jakir Hossain Khan. PhD thesis, University of Malaya.

Mohammad Momeen, Ul Islam (2015) Feasibility study of ground palm oil fuel ash as partial cement replacement material in oil palm shell lightweight concrete / Mohammad Momeen Ul Islam. Masters thesis, University of Malaya.

Mohammad Rafiqul, Islam (2011) Assessment of wind energy potential mapping for Peninsular Malaysia / Mohammad Rafiqul Islam. Masters thesis, Universiti Malaya.

Mohammad Razaul , Karim (2017) Feasibility assessment of palm oil clinker powder as supplementary cementitious material / Mohammad Razaul Karim. PhD thesis, University of Malaya.

Mohammad Reza , Safae (2015) Numerical and experimental studies of convection heat transfer to nanofluids in closed conduit flow / Mohammad Reza Safae. PhD thesis, University of Malaya.

Mohammad Sajad , Naghavi Sanjani (2016) Theoretical and experimental investigation on heat pipe solar collector integrated with latent heat thermal energy storage / Mohammad Sajad Naghavi Sanjani. PhD thesis, University of Malaya.

Mohammad Shafenoor , Amin (2018) Identifying significant features and data mining techniques in predicting cardiovascular disease / Mohammad Shafenoor Amin. Masters thesis, Universiti Malaya.

Mohammadhadi, Almasi (2015) Modelling and optimization of a transit services with feeder bus and rail system / Mohammadhadi Almasi. PhD thesis, Universiti Malaya.

Mohammadi, Maryam (2015) Metaheuristic algorithms for solving lot-sizing and scheduling problems in single and multi-plant environments / Maryam Mohammadi. PhD thesis, University of Malaya.

Mohammadkazem, Ramezani (2018) Closed-form solution for stress intensity factors of semi elliptical surface cracks with different inclinations in a cylinder bar under pure tension and pure torsion / Mohammadkazem Ramezani. PhD thesis, University of Malaya.

Mohammadreza , Hamidian (2018) Effect of spiral reinforcement on axial compressive behavior of tubular steel short columns filled with normal and lightweight concretes / Mohammadreza Hamidian. PhD thesis, University of Malaya.

Mohammed , Heydari (2017) Optimization of multipurpose reservoir operation using evolutionary algorithms / Mohammed Heydari. PhD thesis, University of Malaya.

Mohammed F. E. , Alnahhal (2017) Investigation on microstructure, mechanical and durability characteristics of recycled aggregate concrete with non-traditional supplementary cementitious materials / Mohammed F. E. Alnahhal. Masters thesis, University of Malaya.

Mohd Adam , Mohd Noor (2015) Corrosion of carbon steel in different biodiesel blends / Mohd Adam Mohd Noor. Masters thesis, University of Malaya.

Mohd Azham, Mohd Alwi (2021) Study on engine performance and exhaust pollutant using isobutanol - Calophyllum inophyllum biodiesel - diesel ternary blends in a diesel engine / Mohd Azham Mohd Alwi. Masters thesis, Universiti Malaya.

Mohd Azlis Sani, Md Jalil (2015) Development of an integrated train driver performance model / Mohd Azlis Sani Md Jalil. PhD thesis, University of Malaya.

Mohd Bukhari, Mat Salleh (2017) Ergonomics assessment for seat belt achorage location at rear center seat / Mohd Bukhari Mat Salleh. Masters thesis, University of Malaya.

Mohd Fahmi , Azman (2013) Resource allocation based on interference coordination for Multicast-Broadcast Single Frequency Network (MBSFN) / Mohd Fahmi Azman. Masters thesis, University of Malaya.

Mohd Fauzi , Zanil (2012) Neuro-fuzzy based hybrid method for modeling and control of pH neutralization / Mohd Fauzi Zanil. Masters thesis, University of Malaya.

Mohd Hafizan , Md. Isa (2013) Self-consolidating concrete incorporating palm oil fuel ash as a supplementary cementing material / Mohd Hafizan Md. Isa. Masters thesis, University of Malaya.

Mohd Hafizan , Md.Isa (2024) Utilization of ground tile waste with lime as a cohesive soil stabilizer in road subgrade layer / Mohd Hafizan Md.Isa. PhD thesis, Universiti Malaya.

Mohd Jamil , Abdul Wahab (2013) Strength assessment of structural size Malaysian timbers / Mohd Jamil Abdul Wahab. Masters thesis, University of Malaya.

Mohd Rasdan , Ibrahim (2018) The effect of crumb rubber modification on the physical properties of porous asphalt / Mohd Rasdan Ibrahim. PhD thesis, University of Malaya.

Mohd Redzuan, Ramli (2015) Combined chlorination and nanofiltration to enhance removal efficiencies of sulphonamide in simulated wastewater / Mohd Redzuan Ramli. Masters thesis, University of Malaya.

Mohd Syukri, Ali (2013) Short distance and average absolute distance with wavelet transform for the high impedance fault location in the 11KV distribution underground system / Mohd Syukri Ali. Masters thesis, University of Malaya.

Mohd Zaharifudin , Muhamad Ali (2019) Rain gauge network optimization in a tropical area towards efficient hydrological data acquisition / Mohd Zaharifudin Muhamad Ali. PhD thesis, Universiti Malaya.

Mohd. Mostafizur, Rahman (2015) Thermophysical properties of methanol based nanofluids / Mohd. Mostafizur Rahman. Masters thesis, University of Malaya.

Mohsen, Akbari (2016) Improving spectrum efficiency on cognitive radio spectrum sensing with enhanced diversity concept / Mohsen Akbari. PhD thesis, University of Malaya.

Mohsen, Kobraei (2012) A comparative study between CFRP and steel shear reinforcement bar in self compacting reinforced concrete beams / Mohsen Kobraei. Masters thesis, University of Malaya.

Mohsen Marani, Barzani (2015) Machinability of al-11si-2cu cast alloy modified by bismuth, strontium or antimony / Mohsen Marani Barzani. PhD thesis, University of Malaya.

Mohsen Vafaei , Fard (2020) Synthesis of polyurethane incorporated by calcium oxide and magnesium oxide for heavy metal removal from water / Mohsen Vafaei Fard. PhD thesis, Universiti Malaya.

Moinuddin, Mohammed Quazi (2016) Development of wear resistant metal matrix composite coatings based on laser surfacing engineering technique / Moinuddin Mohammed Quazi. PhD thesis, University of Malaya.

Mok , Chun Fah (2020) Poly(vinyl alcohol)/α-chitin/nanocellulose composites developed from oil palm empty fruit bunch (OPEFB) for removal of cationic dyes / Mok Chun Fah. PhD thesis, Universiti Malaya.

Mook, Wei Tze (2018) Adsorption-electrocoagulation process for removal reactive black 5 DYE from aqueous solution / Mook Wei Tze. PhD thesis, University of Malaya.

Moradi, Ali (2015) Development of bovine cartilage extracellular matrix as a potential scaffold for chondrogenic induction of human dermal fibroblasts / Ali Moradi. PhD thesis, University of Malaya.

Mostafa, Ghomeishi (2015) Development and characterization of new optical fibre based radiation dosimeters / Mostafa Ghomeishi. PhD thesis, University of Malaya.

Mostafa, Modiri Delshad (2016) Backtracking search algorithm for optimal power dispatch in power system / Mostafa Modiri Delshad. PhD thesis, University of Malaya.

Mouaz , Al Kouzbary (2019) Robotic assistive ankle-foot prosthesis based on sensorless fuzzy logic control system / Mouaz Al Kouzbary. Masters thesis, University of Malaya.

Mozafar , Ansari (2021) Development of soft computing prediction model for the influent physicochemical characteristics of sewage treatment plants / Mozafar Ansari. PhD thesis, Universiti Malaya.

Mubarak , Mujawar (2015) Synthesis and characterization of multiwall carbon nanotubes using microwave heating for removal of heavy metals / Mubarak Mujawar. PhD thesis, University of Malaya.

Mubashir, Gulzar (2017) Tribological study of nanoparticles enrichedbio-based lubricants for engine piston ring–cylinder interaction / Mubashir Gulzar. PhD thesis, University of Malaya.

Muhamad Amar , Azhar (2024) Wind mapping of Malaysia using ward’s method of clustering and the effect study to lattice structure / Muhamad Amar Azhar. PhD thesis, Universiti Malaya.

Muhamad Farhan , Mohd Mazlan (2024) Development of automated methadone dispenser for drug addiction therapy / Muhamad Farhan Mohd Mazlan. Masters thesis, Universiti Malaya.

Muhamad Firdaus , Ahmad (2020) Fault location in distribution system based on voltage sag analysis / Muhamad Firdaus Ahmad. Masters thesis, University of Malaya.

Muhamad Sharul Nizam, Awang (2021) Effect of blending plastic pyrolytic oil and waste cooking biodiesel on engine performance, emissions and lubricity of a small diesel engine fuel with palm oil biodiesel (B30) / Muhamad Sharul Nizam Awang. Masters thesis, Universiti Malaya.

Muhammad, Jamaluddin (2017) Workstation design and analysis on student working in electrical wiring lab at Politeknik Tuanku Syed Sirajuddin / Muhammad Jamaluddin. Masters thesis, University of Malaya.

Muhammad , Aamir (2016) Design of a non-isolated single phase online ups topology with parallel battery bank for low power applications / Muhammad Aamir. PhD thesis, University of Malaya.

Muhammad , Abdul Rahman (2013) Implementation of permanent magnet synchronous motor drives system suitable for air-conditioner application / Muhammad Abdul Rahman. Masters thesis, University of Malaya.

Muhammad , Aslam (2017) Mechanical properties and structural performance of sustainable lightweight aggregate concrete using blended oil palm bio products / Muhammad Aslam. PhD thesis, University of Malaya.

Muhammad Afiq, Dzulkifli (2019) Neural network-based muscle torque prediction using mechanomyography during electrically-evoked knee extension and standing in spinal cord injured patients / Muhammad Afiq Dzulkifli. Masters thesis, University of Malaya.

Muhammad Elrashid , Yousif Mohamed (2017) A support vector machine based approach for improving accuracy and performance of test oracles / Muhammad Elrashid Yousif Mohamed. Masters thesis, Universiti Malaya.

Muhammad Faisal , Javed (2018) Flexural performance of cold formed steel tube filled with oil palm clinker concrete / Muhammad Faisal Javed. PhD thesis, University of Malaya.

Muhammad Fazrin, Abdullah (2021) Design concept of in-pipe hydro system prototype for renewable energy generation: Vertical axis parallel turbines / Muhammad Fazrin Abdullah. Masters thesis, Universiti Malaya.

Muhammad Harith, Hasnul (2021) Dispersion stability of graphene in bio-based lubricant and its effect on tribological properties / Muhammad Harith Hasnul. Masters thesis, Universiti Malaya.

Muhammad Mujtaba , Abbas (2021) Comparative study of nanoparticles and alcoholic fuel additives with optimized synthesis of palm-sesame biodiesel using tribological and internal combustion engine testing / Muhammad Mujtaba Abbas. PhD thesis, Universiti Malaya.

Muhammad Mukhlesur, Rahman (2012) Application of carbon fiber reinforced polymer laminate for strengthening reinforced concrete T-beam /Muhammad Mukhlesur Rahman. Masters thesis, University of Malaya.

Muhammad Shafiq, Ibrahim (2020) Preventing delayed cracks in SUS304 deep drawn cups using extreme blank holding forces aided by nanolubrication / Muhammad Shafiq Ibrahim. Masters thesis, University of Malaya.

Muhammad Usman , Hanif (2018) Nonlinear vibration based modeling for damage detection of reinforced concrete beams / Muhammad Usman Hanif. PhD thesis, University of Malaya.

Muhammad Usman , Rashid (2017) Development of Ni-based catalysts via microemulsion synthesis approach for methane dry reforming / Muhammad Usman Rashid. PhD thesis, University of Malaya.

Muhammad Zulhaziman , Mat Salleh (2019) Efficient separation of benzene and cyclohexane by liquid liquid extraction using emerging solvents and their binary mixtures / Muhammad Zulhaziman Mat Salleh. PhD thesis, Universiti Malaya.

Muhammed Ashik, U.P (2016) Development of nanocatalysts via co-precipitation cum modified stöber method and application to methane decomposition / Muhammed Ashik.U.P. PhD thesis, University of Malaya.

Mukhtar , Fatihu Hamza (2017) Design of type-2 fuzzy logic controllers using meta-heuristic optimization algorithms for rotary inverted pendulum / Mukhtar Fatihu Hamza. PhD thesis, University of Malaya.

Mushtaq, Ahmad (2016) Two-step synthesis of nano heterometallic catalysts for water treatment and biogasoline production / Mushtaq Ahmad. PhD thesis, University of Malaya.

N

Nabeel, Ahmad (2019) Liquefaction of natural rubber to liquid fuel using water and alcohol solvents / Nabeel Ahmad. PhD thesis, Universiti Malaya.

Nadarajan, Sundar Babu (1998) Protective coatings for corrosion control / Sundar Babu Nadarajan. PhD thesis, University of Malaya.

Nasrin , Abu Bakar (2024) Techno-economic assessment and environmental analysis of bio-compressed natural gas production from palm oil mill effluent / Nasrin Abu Bakar. Masters thesis, Universiti Malaya.

Nasser, Mohamed Ramli (2015) Development of neural network based models to control temperature and estimate composition of a debutaniser column / Nasser Mohamed Ramli. PhD thesis, University of Malaya.

Navaratnam, Shanti (2001) Preparation and characterization of lithiated cathode materials for lithium batteries / Shanti Navaratnam. Masters thesis, Universiti Malaya.

Navid, Ranjbar (2015) The effects of elevated temperature and fiber reinforcement on fly ash based geopolymer concrete / Navid Ranjbar. PhD thesis, Universiti Malaya.

Navid Hashemi, Taba (2016) An enhanced formal inspection process to improve the efficiency and effectiveness of software inspection process / Navid Hashemi Taba. PhD thesis, University of Malaya.

Navin Raja , Kuppusamy (2016) Thermal enhancement in a microchannel heat sink using passive methods / Navin Raja Kuppusamy. PhD thesis, University of Malaya.

Neo , En Xin (2024) Data driven particulate matters prediction in Klang Valley using machine learning techniques / Neo En Xin. PhD thesis, Universiti Malaya.

Newsha , Abdollahi Chahkand (2013) Investigation on torsional behaviour of CFRP strengthened square hollow steel section / Newsha Abdollahi Chahkand. Masters thesis, University of Malaya.

Ng, Connie (2019) Effect of nano alumina on geopolymer mortar developed from untreated and treated palm oil waste ashes / Ng Connie. Masters thesis, University Malaya.

Ng, Kai Wern (2018) Fabrication, testing and performance enhancement of a small scale tidal current turbine / Ng Kai Wern. Masters thesis, Universiti Malaya.

Ng, Poh Yen (2004) E-learning in Malaysia : adult perceptions as a method for further studies / Ng Poh Yen. Masters thesis, University of Malaya..

Ng, Yee Sern (2011) Application of imidazolium-based ionic liquid as bulk liquid membrane in phenol removal / Ng Yee Sern. Masters thesis, University of Malaya.

Ng , Kelvin (2021) Paper based cell culture: Electrospin-coated paper as natural extracellular matrix inspired biopolymer scaffold / Ng Kelvin. PhD thesis, Universiti Malaya.

Niaz, Bahadur Khan (2018) Numerical modeling and analysis of flow around stationary and oscillating circular cylinder / Niaz Bahadur Khan. PhD thesis, University of Malaya.

Nik Azimatolakma , Awang (2016) Formation and stability of aerobic granular sludge in sewage treatment under low loading conditions / Nik Azimatolakma Awang. PhD thesis, University of Malaya.

Noor Ashikin , Mohd Rashid (2012) Evaluation of field and flux distribution for electrical steels under unidirectional magnetization / Noor Ashikin Mohd Rashid. Masters thesis, University of Malaya.

Noor Asliza, Ahmad (2021) Analysis of interface pressure for double curves in idiopathic scoliosis patients / Noor Asliza Ahmad. Masters thesis, Universiti Malaya.

Noor Azeerah , Abas (2020) Catalytic esterification of palm-based lauric acid diethylene glycol via microwave heating / Noor Azeerah Abas. Masters thesis, Universiti Malaya.

Noor Farahain, Muhammad Amin (2017) Development of flood hazard map for Johor river basin / Noor Farahain Muhammad Amin. Masters thesis, University of Malaya..

Noor Fauziyah , Ishak (2020) Alumina ceramic membrane incorporated with graphene oxide frameworks for protein recovery / Noor Fauziyah Ishak. PhD thesis, Universiti Malaya.

Noorazah , Zolkarnain (2015) Life cycle assessment on the palm-based polyol production / Noorazah Zolkarnain. Masters thesis, University of Malaya.

Noorsaiyyidah, Darman Singho (2013) Synthesis and characterizations of silver/polymethylmethacrylate nanocomposites via in-situ technique / Noorsaiyyidah Darman Singho. Masters thesis, University of Malaya.

Noorsyazwani , Zulkifli (2019) Development of dental material glass ionomer cement removal technique using ND:YAG laser / Noorsyazwani Zulkifli. PhD thesis, University of Malaya.

Nor Aliya, Hamizi (2017) Synthesis and characterization of Mn-doped CdSe quantum dots via inverse micelle technique / Nor Aliya Hamizi. PhD thesis, University of Malaya.

Nor Elleeiana, Mohd Syah (2013) Identification of gait disparity using gait analysis and cyclograms: application for prosthetic knee control / Nor Elleeiana Mohd Syah. Masters thesis, University of Malaya.

Nor Haslina, Abdullah (2020) Flow patterns, velocity distributions and mixing time in stirred tank reactor under a range of operating conditions / Nor Haslina Abdullah. Masters thesis, Universiti Malaya.

Nor Ilyana, Muhd Nordin (2017) Evaluation of corrosive environment impact on low cost Fe/Al ADDED SAC105 solder alloys / Nor Ilyana Muhd Nordin. PhD thesis, University of Malaya.

Nor Suliani, Abdullah (2020) Investigation of manual material handling on musculoskeletal disorder at computer numerical control workstation / Nor Suliani Abdullah. Masters thesis, Universiti Malaya.

Nor'ain, Mohd Yusoff (2015) A shared cognitive user task framework for elearning storyboard / Nor'ain binti Mohd Yusoff. PhD thesis, University of Malaya.

Noraini, Ajit (2012) Steel connection behaviour in frame and floor system at elevated temperature /Noraini Ajit. Masters thesis, University of Malaya.

Norashikin , Ahmad (2018) Preparation of electrospun polyvinylidene fluoride/nanosilver nanofibrous membrane and its antimicrobial potential / Norasikin Ahmad. Masters thesis, University of Malaya.

Norazlina, Saidin (2015) Development of thulium-doped and co-doped fiber lasers for 1.9 micron region operation / Norazlina Saidin. PhD thesis, University of Malaya.

Norazlina , Bateni (2020) Permeable road pavement with subsurface precast micro-detention storage: A green pavement practice / Norazlina Bateni. PhD thesis, Universiti Malaya.

Norfazila, Mohd Sultan (2013) Synthesis and optical characterization of chitosan capped gold nanoparticles via chemical reduction technique / Norfazila Mohd Sultan. Masters thesis, University of Malaya.

Norhani, Md Nadzri (2021) Investigations on wheelchair seating pressure relief system for pressure ulcer prevention among paraplegics / Norhani Md Nadzri. Masters thesis, Universiti Malaya.

Norhashidah , Talip (2020) Radiation modified chitosan/polyvinyl alcohol film with polyvinyl pyrrolidone coating for heavy metal ion removal / Norhashidah Talip. Masters thesis, Universiti Malaya.

Norhirni , Md Zahir (2012) Design and development of a test rig for hydraulic regenerative braking system / Norhirni Md Zahir. Masters thesis, University of Malaya.

Norizan , A Kamaludeen (2019) Guideline-based development approach for IoT home applications / Norizan A Kamaludeen. Masters thesis, Universiti Malaya.

Norliyana, Zin Zawawi (2012) Life cycle assessment of greenhouse gases emission from nitrogen fertilizer application in palm oil industry / Norliyana Zin Zawawi. Masters thesis, University of Malaya.

Normazlianita, Mohamad Alias (2021) Multi-array sensorised pillowcase as call detection alarm system for in ward tetraplegic patient / Normazlianita Mohamad Alias. Masters thesis, Universiti Malaya.

Norshazmira, Mat Azmi (2018) Detection of scour depth using singlemode-multimode-singlemode fiber sensor / Norshazmira Mat Azmi. Masters thesis, Universiti Malaya.

Norsiah, Mohamad (2012) A framework of factors to improve ethics in the Malaysian construction industry / Norsiah Mohamad. PhD thesis, University of Malaya.

Norzuria , Ibrahim (2020) Kinematic analysis of forehand drop shot and long shot services in table tennis / Norzuria Ibrahim. PhD thesis, Universiti Malaya.

Nuha S., Mashaan (2012) The effect of crumb rubber modifier to the properties and rheological behaviour of asphalt binder / Nuha S. Mashaan. Masters thesis, University of Malaya.

Nur Afiqah , Hamzah (2022) Performance evaluation of the BioSculptor® system as a CAD/CAM tool for transtibial residual limb shape monitoring and generation of socket interface roughness / Nur Afiqah Hamzah. PhD thesis, Universiti Malaya.

Nur Ain Amirah, Rusman (2018) Performance analysis of metal hydride-based hydrogen storage system / Nur Ain Amirah Rusman. Masters thesis, University of Malaya.

Nur Athirah, Yazid (2016) Development of automated visual tracking system for surgical instruments / Nur Athirah Yazid. Masters thesis, University of Malaya.

Nur Atiqah, Surib (2018) Design and fabrication of solar light responsive new metal organic frameworks for photocatalysis / Nur Atiqah Surib. Masters thesis, University of Malaya.

Nur Fadzilah, Mohamad Radzi (2013) Collision avoidance algorithm design for UAV base on parametric theorem and circle overlapping method / Nur Fadzilah Mohamad Radzi. Masters thesis, University of Malaya.

Nur Farhanah , Zulkipli (2017) Generation of Q-Switching pulse train with topology insulators / Nur Farhanah Zulkipli. Masters thesis, University of Malaya.

Nur Nadia, Ahmad Hasan (2017) The effects of sintering additives on the mechanical properties and microstructure evolution of 3 MOL% Y-TZP / Nur Nadia Ahmad Hasan. Masters thesis, University of Malaya.

Nur Nadirah , Khairu Najhan (2021) Numerical closed-form solutions of skin flap surgeries using 3D face models / Nur Nadirah Khairu Najhan. Masters thesis, Universiti Malaya.

Nur Rasyidah , Hasan Basri (2020) Analysis of glutathione supplementation effects on female metabolic syndrome condition using classification techniques / Nur Rasyidah Hasan Basri. Masters thesis, Universiti Malaya.

Nur Saibah , Ghani (2020) Biomechanical investigation of individual with over-pronation and over-supination foot during walking / Nur Saibah Ghani. Masters thesis, University of Malaya.

Nur Zawani, Saharuddin (2011) Modelling of 132kV overhead transmission lines by using ATP/EMTP for back-flashover pattern recognition / Nur Zawani Saharuddin. Masters thesis, University of Malaya.

Nur' Adilah, Abdul Nasir (2021) Miscible blend of polyethersulfone/polyimide membrane crosslinked with diamine for hydrogen/carbon dioxide separation / Nur 'Adilah Abdul Nasir. Masters thesis, Universiti Malaya.

Nurafaliana, Berahim (2020) Synthesis and characterization of bimetallic gold-silver (Au-Ag) nanocatalyst via seed colloid technique / Nurafaliana Berahim. Masters thesis, University of Malaya.

Nureen Shahirah , Ahmad Zaghlul (2023) A study on postural control and lower limb muscle activation among individuals with and without ankle sprain / Nureen Shahirah Ahmad Zaghlul. Masters thesis, Universiti Malaya.

Nurhaslina , Abd Rahman (2019) Microfluidic lab-on-disc approach of 2,2-diphenyl-1-picrylhydrazyl antioxidant assay / Nurhaslina Abd Rahman. Masters thesis, University Malaya.

Nurhusna, Zulkifli (2018) Comparative study of microwave and conventional sintering on properties of zirconia / Nurhusna Zulkifli. Masters thesis, Universiti Malaya.

Nurshafira, Hazim Chan (2021) An improved clipped sub-histogram equalization technique using optimized local contrast factor for mammogram image analysis / Nurshafira Hazim Chan. Masters thesis, Universiti Malaya.

Nursyahirah, Adnan (2018) Investigation on ablution (wudhuk) workstation design for wheelchair users in Malaysia / Nursyahirah Adnan. Masters thesis, University of Malaya.

Nurul Afiqah , Mohd Zaki (2016) Extraction and deproteination of extracted silk fibers from silk cocoon and development of hydrophilic electrospun silk fibers / Nurul Afiqah Mohd Zaki. Masters thesis, University of Malaya.

Nurul Aida Farhana, Othman (2018) Device characterization based on stressor, geometric and process design considerations of fet technology / Nurul Aida Farhana Othman. Masters thesis, University of Malaya.

Nurul Ain , Ramli (2019) Supported imidazolium-based ionic liquid membranes as a Contactor for the selective absorption of CO2 by aqueous monoethanolamine / Nurul Ain Ramli. PhD thesis, Universiti Malaya.

Nurul Ataillah , Abdul Rahim (2013) Electrical and thermal performance evaluation of solar Photovoltaic/Thermal (PV/T) air system / Nurul Ataillah Abdul Rahim. Masters thesis, University of Malaya.

Nurul Athirah, Abu Hussein (2018) Synthesis and characterization of maghemite nanoparticles deposited on silicon substrate / Nurul Athirah Abu Hussein. Masters thesis, Universiti Malaya.

Nurul Atikah, Baharudddin (2022) Micro-bottle resonator for liquid ethanol and sodium hypochlorite sensing / Nurul Atika Baharuddin. Masters thesis, Universiti Malaya.

Nurul Huda, Mat Tahir (2013) Adaptive resource allocation scheme for uplinks in IEEE 802.16m systems / Nurul Huda Mat Tahir. Masters thesis, University of Malaya.

Nurul Izzah, Abd Rahman (2013) Train drivers mental workload and alertness under simulated conditions based on electroencephalogram signals / Nurul Izzah Abd Rahman. Masters thesis, University of Malaya.

Nurul Zieyana , Mohamed Annuar (2013) Modeling and simulation of metal organic halide vapor phase epitaxy growth chamber reactor / Nurul Zieyana Mohamed Annuar. Masters thesis, University of Malaya.

Nusrat , Hoque (2018) Simulation of strengthened reinforced concrete beam debonding behaviour using global energy balance approach / Nusrat Hoque. PhD thesis, University of Malaya.

Nuzaima , Che Mood (2018) Surface water quality assessment for sustainable water management in Varsity Lake, University Malaya / Nuzaima Che Mood. Masters thesis, University of Malaya.

O

Obada , M. A. Asqool (2022) Evaluation of outlier filtering algorithms for accurate measurement of travel time reliability incorporating lane-splitting situations / Obada M. A. Asqool. Masters thesis, Universiti Malaya.

Olatomiwa Lanre , Joseph (2016) Optimal planning and design of hybrid renewable energy system for rural healthcare facilities / Olatomiwa Lanre Joseph. PhD thesis, University of Malaya.

Omar, Almubaied (2017) Corrosion process monitoring of reinforced concrete structure using fiber bragg grating (FBG) strain sensor / Omar Almubaied. Masters thesis, University of Malaya.

Omar Riyadh , Khaleel (2013) The effect of aggregate and mineral admixtures on engineering properties of high strength self compacting concrete / Omar Riyadh Khaleel. PhD thesis, University of Malaya.

Omid , Haddad (2017) Analysis of cyclic performance of stiffened steel plate Shear walls / Analysis of cyclic performance of stiffened steel plate Shear walls / Omid Haddad. PhD thesis, University of Malaya.

Ong, Siew Wee (1996) Investigation of a high repetition rate TEA-C02 laser / Siew Wee Ong. Masters thesis, University of Malaya. .

Onn , Cheen Sean (2013) A computational simulation of heat transfer to turbulent flow separation using nano fluid in a concentric pipe / Onn Cheen Sean. Masters thesis, University of Malaya.

Ooi, Xian Yih (2020) Production of renewable hydrocarbon fuel via titanium oxide-alumina (TiO2-Al2O3) catalytic deoxygenation reaction / Ooi Xian Yih. Masters thesis, Universiti Malaya.

Oyejobi Damilola, Oyewumi (2017) Stochastic dynamic response of a tension leg platform / Oyejobi Damilola Oyewumi. PhD thesis, University of Malaya.

P

Parviz, Mohammadi (2012) Biohydrogen production from Palm Oil Mill Effluent (POME) in an anaerobic hybrid bioreactor / Parviz Mohammadi. PhD thesis, University of Malaya.

Pavithra , Chinatamby (2023) Forecasting of PM2.5 in Malaysia using hybrid artificial neural network / Pavithra Chinatamby. Masters thesis, Universiti Malaya.

Pavitra , Kumar (2021) Nitrogen prediction model through new hybrid model using ant colony optimization and Elman neural network / Pavitra Kumar. PhD thesis, Universiti Malaya.

Peter, Aning Tedong (2014) Guarding the neighbourhoods: The new landscape of control in Malaysia / Peter Aning Tedong. PhD thesis, University Malaya.

Peyman , Darvish (2021) Compensation for three-coil wireless power transfer for misalignment and efficiency improvement in wireless charging system / Peyman Darvish. Masters thesis, Universiti Malaya.

Phuah, Kok Sun (2012) Case study of indoor air quality of health care facilities and hospitals in Malaysia / Phuah Kok Sun. Masters thesis, University of Malaya.

Poon, Chi Tat (2013) Effect of herbal extract on rat bone marrow stromal derived osteoblast growth and differentiation in vitro / Poon Chi Tat. Masters thesis, University of Malaya.

Pouria , Ayough (2022) Experimental and numerical investigations of the compressive behavior of concretefilled steel tubular columns / Pouria Ayough. PhD thesis, Universiti Malaya.

Pouya , Darvish (2021) Performance evaluation of geopolymer mortar with sustainable palm oil clinker sand using a volume based approach / Pouya Darvish. PhD thesis, Universiti Malaya.

Praven, Rajendran (2017) Control of an active magnetic bearing system using pso-based tuning pid controller / Praven Rajendran. Masters thesis, University of Malaya.

Pung, Swee Yong (2002) Formation of copper dots in copper decoration technique / Pung Swee Yong. Masters thesis, University of Malaya.

Puspanathan, Krishnan (2021) Physical and toxicological properties of water treatment residue incorporated clay bricks / Puspanathan Krishnan. Masters thesis, Universiti Malaya.

Putri Zulaiha, Razi (2014) Environmental sustainability and engineering performance of OPC-fly ash mortar mixes with different workability / Putri Zulaiha Razi. Masters thesis, University of Malaya.

R

Ramesh , Ramasamy (2018) Ageing oil well integrity assessment and rehabilitation / Ramesh Ramasamy. PhD thesis, University of Malaya.

Rathinee, Balakumar (2015) Corrosion of phosphor bronze in different biodiesel blends / Rathinee Balakumar. Masters thesis, University of Malaya.

Razuana, Rahim (2017) New standard methodology in cleaner production for small & medium industries / Razuana Rahim. PhD thesis, University of Malaya.

Reza, Mahmoodian (2013) Development of manufacturing techniques for Ti-based functionally graded coatings / Reza Mahmoodian. PhD thesis, University of Malaya.

Reza Afshar , Ghotli (2018) Effect of impeller design on drop sizes and mass transfer in immiscible liquid-liquid system in a stirred vessel / Reza Afshar Ghotli. PhD thesis, University of Malaya.

Rohani, Mokhtar (2017) Behaviour of precast beam-to-column connections by using partly hidden corbel / Rohani Mokhtar. Masters thesis, University of Malaya.

Rosnaini, Saidan (2015) High temperature forming of boronized duplex stainless steel / Rosnaini Saidan. Masters thesis, University of Malaya.

Rusul Khaleel , Ibrahim (2018) Removal of organic pollutants from water using carbon nanotubes functionalized with deep eutectic solvents / Rusul Khaleel Ibrahim. PhD thesis, University of Malaya.

S

Sadek, Deboucha (2011) Engineering properties of compressed bricks based on stabilised peat soils / Sadek Deboucha. PhD thesis, University of Malaya.

Sadia, Rahman (2014) Experimental investigation on impacts of tsunami-induced forces on coastal structures / Sadia Rahman. Masters thesis, University of Malaya.

Safdar, Khan (2021) Torsional behaviours and crack localization in palm oil clinker concrete / Safdar Khan. Masters thesis, Universiti Malaya.

Saif , Wakeel (2021) Comparison of performance of no-clean and water-soluble fluxes in fine-pitch flip-chip package / Saif Wakeel. Masters thesis, Universiti Malaya.

Sajedeh Sadat , Ghazizadeh Hashemi (2018) Safe disposal of Coal Bottom Ash using cement based solidification and stabilization techniques / Sajedeh Sadat Ghazizadeh Hashemi. PhD thesis, University of Malaya.

Sajjad, Hossain (2015) Influence of gas-to-liquid fuel in the combined blends of biodiesel-diesel / Sajjad Hossain. Masters thesis, University of Malaya.

Salmaliza , Salleh (2018) Evaluation of solidified and stabilized shipyard abrasive blasting waste as construction material / Salmaliza Salleh. PhD thesis, University of Malaya.

Sami Fathi , Ali Khalil (2016) Development and evaluation of an improved multiple frequency bioimpedance analyzer for disease management system / Sami Fathi Ali Khalil. PhD thesis, University of Malaya.

Samir, Hassani (2017) Mathematical modeling of optical and thermal behaviour of a new cascade nanofluid-based PV/T system / Samir Hassani. PhD thesis, University of Malaya.

Sanjid Ahmed , Patwary (2015) Experimental study of engine performance and emission of palm, mustard and calophyllum biodiesel blends in a diesel engine / Sanjid Ahmed Patwary. Masters thesis, University of Malaya.

Sanusi, Azlin (2001) Sulphide based materials as potential anodes in lithium ion cells / Azlin Sanusi. Masters thesis, University of Malaya.

Sardar Kashif , Ur Rehman (2018) Evaluation of multifunctional properties of graphene based cement composites / Sardar Kashif Ur Rehman. PhD thesis, University of Malaya.

Sarfaraz , Kamangar (2013) Finite element analysis of heat transfer in the human head / Sarfaraz Kamangar. Masters thesis, University of Malaya.

Saritha, Paramasivam (2013) Evaluating Level of Service (LOS) for service coverage in Kuala Lumpur transit system using GIS / Saritha Paramasivam. Masters thesis, University of Malaya.

See , Tiam You (2024) Solid-state microwave disruption technique for the extraction of bioactive compounds from Orthosiphon stamineus (Java tea) / See Tiam You. PhD thesis, Universiti Malaya.

Seef Saadi , Fiyadh (2019) Removal of heavy metals from water by functionalized carbon nanotubes with deep eutectic solvents: An artificial neural network approach / Seef Saadi Fiyadh. PhD thesis, Universiti Malaya.

Seyed Ali, Asgharzadehahmadi (2017) Intensification of dual-phase operations using low-frequency high-power ultrasound irradiation / Seyed Ali Asgharzadehahmadi. PhD thesis, University of Malaya.

Seyed Alireza, Ravanfar (2017) Vibration-based structural damage detection and system identification using wavelet multiresolution analysis / Seyed Alireza Ravanfar. PhD thesis, University of Malaya.

Seyed Hakim, Seyed Jamalaldin (2015) Artificial neural networks and adaptive neuro-fuzzy inference systems for structural damage identification using vibration data / Seyed Jamalaldin Seyed Hakim. PhD thesis, University of Malaya.

Seyed Hossein, Mahdavi (2016) Structural health monitoring using adaptive wavelet functions / Seyed Hossein Mahdavi. PhD thesis, University of Malaya.

Seyed Mohammad Reza, Khalifeh Soltanian (2016) Dual-wavelength fiber lasers covering the regions of 1.0, 1.5 and 2.0 micron and their applications / Seyed Mohammad Reza Khalifeh Soltanian. PhD thesis, University of Malaya.

Seyed Shirazi, Seyed Farid (2015) Development of calcium silicate-based composites for load-bearing implants / Seyed Farid Seyed Shirazi. PhD thesis, University of Malaya.

Seyed Sina , Sebtahmadi (2016) 12 sector dtc and pso-pi current control technics of z-source matrix converter for IM drive / Seyed Sina Sebtahmadi. PhD thesis, University of Malaya.

Seyed Vahid, Razavi Tosee (2012) Static and dynamic neural network modeling for reinforced concrete slab / Seyed Vahid Razavi Tosee. PhD thesis, University of Malaya.

Seyedmehdi, Mirmohammadsadeghi (2015) Formulating and solving stochastic truck and trailer routing problems using meta-heuristic algorithms / Seyedmehdi Mirmohammadsadeghi. PhD thesis, University of Malaya.

Seyedsaeed , Tabatabaeikia (2016) Performance analysis of exhaust air energy recovery wind turbine / Seyedsaeed Tabatabaeikia. PhD thesis, University of Malaya.

Shabnam, Kazemi (2020) Thermodynamic analysis and optimization of organic Rankine cycles using 1-butylpyridinium tetrafluoroborate as a geothermal fluid / Shabnam Kazemi. Masters thesis, University of Malaya.

Shahrir Razey , Sahamir (2018) Evaluation of hybrid self-assembled liquid crystal systems for potential application in solar thermoelectric generator / Shahrir Razey Sahamir. PhD thesis, University of Malaya.

Shanmuga Suntharam , Kittappa (2015) Synthesis and application of silica based mesoporous materials for removal of endocrine disrupting compounds in aqueous solution / Shanmuga Suntharam Kittappa. Masters thesis, University of Malaya.

Shanthi, Arulmani (1999) Weathering and stability of cut slopes in quartz-mica schists of the Seremban-Siliau area, Negeri Sembilan, Malaysia / by Arulmani Shanthi. Masters thesis, University of Malaya.

Sharifah Norsyahindah , Syed Nor (2024) Characterization of functionalized support layer performance for surface plasmon resonance sensing platform for viral protein detection / Sharifah Norsyahindah Syed Nor. PhD thesis, Universiti Malaya.

Sharmini, Sunasee (2018) Removal of Bisphenola A applying sonophotocatalysis / Sharmini Sunasee. Masters thesis, University of Malaya.

Shatha Sahib , Kareem (2020) Flexural behaviour of over-reinforced concrete beam using external steel plate / Shatha Sahib Kareem. PhD thesis, Universiti Malaya.

Shervin, Motamedi (2016) Design, construction and monitoring of ecofriendly revetments for coastal protection / Shervin Motamedi. PhD thesis, University of Malaya.

Shivashankar , Sukumar (2017) Energy management system for optimal operation of microgrid consisting of PV, fuel cell and battery / Shivashankar Sukumar. PhD thesis, University of Malaya.

Shwan Hussain, Said (2016) Evaluation of mechanical properties of engineered cementitious composite for exterior beam-column joints under reversed cyclic loading / Shwan Hussain Said. PhD thesis, University of Malaya.

Sim, Hoi Yin (2013) Defect classification in reciprocating compressor using acoustic emission technique / Sim Hoi Yin. Masters thesis, University of Malaya.

Sim, Lan Ching (2015) Synthesis of solar and visible-light-active highly ordered titania nanotube arrays (TNTS) for photocatalytic applications / Sim Lan Ching. PhD thesis, University of Malaya.

Sina Mirzapour , Mounes (2016) A study of fibre glass grid reinforced hot mix asphalt concrete / Sina Mirzapour Mounes. PhD thesis, University of Malaya.

Siti Aisyah Syaerah, Mustapa (2018) Palm oil clinker as a novel bio-filler in intumescent fire protective coatings for steel / Siti Aisyah Syaerah Mustapa. Masters thesis, University of Malaya.

Siti Asiah , Muhammad (2017) Seasonal impact on water quality and model development of a tropical urban river / Siti Asiah Muhammad. Masters thesis, University of Malaya.

Siti Mariah , Mohd Yasin (2020) Synthesis and characterization of silver nanoparticles in lamellar lyotropic liquid crystal / Siti Mariah Mohd Yasin. PhD thesis, Universiti Malaya.

Siti Nur , Hasan (2013) Bioactivity and mechanical behaviour of nanolayer hydroxyapatite coating developed through superplastic embedment of titanium alloy / Siti Nur Hasan. Masters thesis, University of Malaya.

Siti Salbiah , Samsudin (2012) Image stitching approach using minimum average correlation energy /Siti Salbiah Samsudin. Masters thesis, University of Malaya.

Siti Sara Seera , Mustapa Kamil (2013) Model test on the effects of some root properties on pullout capacity / Siti Sara Seera Mustapa Kamil. Masters thesis, University of Malaya.

Sk. Shezan , Arefin (2016) Performance analysis of solar-wind-diesel hybrid standalone renewable energy systems suitable for Malaysian climate / Sk. Shezan Arefin. Masters thesis, University of Malaya.

Somayeh , Mirzaei (2018) Carbon dioxide absorption into aqueous blends of monoethanolamine and glycerol in a packed bed column / Somayeh Mirzaei. PhD thesis, University of Malaya.

Soon, Foo Yew (2012) Characterization of pMosfet degradation in negative bias temperature instability test / Soon Foo Yew. Masters thesis, University of Malaya.

Sophi Shilpa, Gururajapathy (2017) Fault location in distribution systems using mathematical analysis and support vector machine / Sophi Shilpa Gururajapathy. PhD thesis, University of Malaya.

Subashiny, Prabakaran (2019) Corrosion behaviour of aluminium-graphene nano platelets (AL/GNP) nanocomposite / Subashiny Prabakaran. Masters thesis, University of Malaya.

Subramaniam, Rajan (2003) Characterization of polished silicon wafer / by Rajan Subramaniam. Masters thesis, University of Malaya.

Sumesh , Mathialagan (2020) Engineering properties and microstructural characteristics of cement and geopolymer based mortars using nontraditional supplementary cementitious materials / Sumesh Mathialagan. PhD thesis, Universiti Malaya.

Sumra , Yousuf (2021) Alkalinity of cement mortar containing different types of supplementary cementitious materials under accelerated curing conditions / Sumra Yousuf. PhD thesis, Universiti Malaya.

Suriafazlin, Ismail (2012) Mechanical properties of ultra-high performance concrete containing silica fume /Suriafazlin Ismail. Masters thesis, University of Malaya.

Syafawati, Hasbi (2013) Indoor air quality and climate change impacts on air-conditioning and mechanical ventilation (ACMV) systems in commercial buildings in the tropics / Syafawati Hasbi. Masters thesis, University of Malaya.

Syahyadi, Rizal (2012) Performance assessment of irrigation system using indicators for decision making / Rizal Syahyadi. Masters thesis, University of Malaya.

Syamsul , Bahri (2017) Mechanical and durability properties of high performance 100 MPA rice husk ash concrete / Syamsul Bahri. PhD thesis, University of Malaya.

Syarifah Aisyah , Syed Ibrahim (2024) Unilateral breast cancer-related lymphedema diagnosis and monitoring system using bioimpedance analysis on a smartphone application / Syarifah Aisyah Syed Ibrahim. Masters thesis, Universiti Malaya.

Syed Mofachirul, Islam (2015) Performance of cement stabilised peat bricks / Syed Mofachirul Islam. Masters thesis, University of Malaya.

Syed Mohammad Ammar , Haeder (2019) Titanium dioxide coating microfiber for humidity sensor application / Syed Mohammad Ammar Haeder. Masters thesis, Universiti Malaya.

Syed Naveed, Raza Shah (2016) Behavior of steel pallet rack beam to column connections at ambient and elevated temperatures / Syed Naveed Raza Shah. PhD thesis, University of Malaya.

T

Tajul Baharuddin, Mohamad Faizal (2015) Integration of geochemical and geophysical approaches for the assessment of seawater intrusion on groundwater for agricultural purposes / Mohamad Faizal Tajul Baharuddin. PhD thesis, University of Malaya.

Tamalkhani, Syammaun (2013) Effect of oil palm fiber on some physical properties of porous asphalt / Tamalkhani Syammaun. Masters thesis, University of Malaya.

Tan, Boon Khoon (2015) Environmental friendly poly (vinyl) alcohol/kenaf fiber composites for agricultural applications / Tan Boon Khoon. PhD thesis, University of Malaya.

Tan, Chee Hong (2000) Design and integration of a CO2 laser hybrid cuting system for materials processing / by Tan Chee Hong. Masters thesis, University of Malaya.

Tan, Jully (2018) An integrated fuzzy analytic hierarchy process and life cycle optimization model for microalgae production / Tan Jully. PhD thesis, University of Malaya.

Tan, Kok Tong (2016) Seismic performance and fragility curves for reinforced concrete framed buildings in Klang Valley / Tan Kok Tong. PhD thesis, University of Malaya.

Tan, Mean Yee (2020) Surface modification of biomaterials to reduce polyethylene wear in metal-polymer contact / Tan Mean Yee. Masters thesis, Universiti Malaya.

Tan, Say Min (2012) Preparation and characterization of PEO-PMMA-LiCIO[4]-EC-MnO[2] nanocomposite polymer electrolytes / Tan Say Min. Masters thesis, University of Malaya.

Tan, Seng Gee (2001) Synthesis and characterization of lithiated mixed metal oxides for lithium ion rechargeable batteries / Tan Seng Gee. Masters thesis, University of Malaya.

Tan, Soon Sien (2016) Effect of sintering profile on the densification behaviour of forsterite ceramics /Tan Soon Sien. Masters thesis, University of Malaya.

Tan, Wei Ting (2021) Biomechanical analysis of distal stent-graft-induced new entry (SINE) formation in aortic dissection patients / Tan Wei Ting. Masters thesis, Universiti Malaya.

Tan, Yee Seng (2016) Crystal engineering studies of metal 1,1�-dithiolates: coordination polymers and beyond / Tan Yee Seng. PhD thesis, University of Malaya.

Tan, Yoke Meng (2016) Influence of processing parameters in the mechanical properties enhancement of forsterite ceramic / Tan Yoke Meng. PhD thesis, University of Malaya.

Tan , Chee Hau (2020) Development of an augmented reality based facility layout planning and optimization / Tan Chee Hau. Masters thesis, Universiti Malaya.

Tan , Kim Han (2019) Fabrication and optical behaviour of nanocomposites from electrodeposited au nanoparticles in polymer microcavities / Tan Kim Han. PhD thesis, University of Malaya.

Tan , Yee Tong (2020) Fractionation and characterization of extracted lignin from oil palm empty fruit bunch using synthesized deep eutectic solvents / Tan Yee Tong. PhD thesis, Universiti Malaya.

Tang, Yoke Cheng (2001) The effects of incorporation of polyethylene glycol on properties of silica-carbon black-filled rubber compound / by Tang Yoke Cheng. Masters thesis, University of Malaya.

Tatagar Mohammad Yunus, Khan (2017) Effects of injection parameters on performance of diesel engine run on biodiesel from direct transesterification / Tatagar Mohammad Yunus Khan. PhD thesis, University of Malaya.

Tawfik Yahya, Alnusairi (2020) Detection of standing and sitting variations based on in-socket piezoelectric sensors for transfemoral amputees / Tawfik Yahya Mohammed Alnusairi. Masters thesis, University of Malaya.

Teh, Yee Ching (2017) The effects of various processing conditions on the properties of hydroxyapatite / Teh Yee Ching. PhD thesis, University of Malaya.

Teh , Tzyy Wooi (2024) Development of novel high damping rubber damper for dynamic energy dissipation under direct axial cyclic load / Teh Tzyy Wooi. PhD thesis, Universiti Malaya.

Teng , Wai Keng (2022) Production of glycerol carbonate from industrial grade crude glycerol via microwave-assisted transesterification / Teng Wai Keng. PhD thesis, Universiti Malaya.

Teuku Meurah, Indra Riayatsyah (2018) Techno-economics analysis of biodiesel production from non-edible Reutealis trisperma oil / Teuku Meurah Indra Riayatsyah. Masters thesis, Universiti Malaya.

Tharsika, Thabothanayakam (2015) Synthesis and characterization of zinc oxide and tin oxide based nanostructures for gas sensing applications / Tharsika Thabothanayakam. PhD thesis, University of Malaya.

Tie, Tzer Sheng (2021) Influence of lightweight expanded perlite and vermiculite on the properties of ground granulated blast furnace slag and fly ash-based mortar / Tie Tzer Sheng. Masters thesis, Universiti Malaya.

Ting , Chen Hunt (2018) Sintering effects and hydrothermal ageing behaviour of Yttria-stabilised zirconia with MnO2 doping / Ting Chen Hunt. PhD thesis, University of Malaya.

Tsen, Shuk Fun (2013) Determination of structural properties of red seraya plywood using eurocodes compliant testing method / Tsen Shuk Fun. Masters thesis, University of Malaya.

Tun Mohamad Arifin, Yahaya (2018) A study of ergonomic risk on workers performing material manual handling of activity at manufacturing industry / Tun Mohamad Arifin Yahaya. Masters thesis, University of Malaya.

U

Umma, Habiba (2016) The preparation of chitosan/PVA/zeolite electrospun composite nanofibrous membrane for heavy metal removal application / Umma Habiba. Masters thesis, University of Malaya.

V

V. Pulugurta, Ashwini Kumar (1998) Structural properties of clayey materials / by Ashwini Kumar V. Pulugurta. Masters thesis, University of Malaya.

Varadaraj, Satyagalam (1998) Study on deterioration of mild steel and concrete in presence of industrial waste water and its control / by Satyagalam Varadaraj. Masters thesis, University of Malaya.

Vijeta, Khare (2016) Detection of multi-oriented moving text in videos / Vijeta Khare. PhD thesis, University of Malaya.

Vivian Koh , Ci Ai (2020) A centralised multi-objective model predictive control for biventricular assist devices / Vivian Koh Ci Ai. PhD thesis, Universiti Malaya.

W

Waleed , Alghani (2020) Preparation characterization and tribological behavior of lube oil with nanoparticles additives / Waleed Alghani. PhD thesis, Universiti Malaya.

Wan Noraishah , Wan Abdul Munim (2020) Fault-tolerant capability of star connected symmetrical six-phase induction machine with single and two isolated neutrals / Wan Noraishah Wan Abdul Munim. PhD thesis, Universiti Malaya.

Wan Norhasiah, Wan Bidin (2017) Full scale testing of precast beam to column connection using billet connector and beam half joint subjected to reversible loading / Wan Norhasiah Wan Bidin. Masters thesis, University of Malaya.

Wan Nurlina , Wan Yahya (2020) 3-dimensional carbon Micro-electro Mechanical System (MEMS) electrode for potential dielectrophoretic hepatic cell patterning application / Wan Nurlina Wan Yahya. PhD thesis, Universiti Malaya.

Wei , Yaxing (2024) A decomposed streamflow non-gradientbased artificial intelligence forecasting algorithm with factoring in aleatoric and epistemic variables / Wei Yaxing. PhD thesis, Universiti Malaya.

Wong, Jee Keen Raymond (2016) Partial discharge classification on xlpe cable joints under different noise levels using artificial intelligence techniques / Wong Jee Keen Raymond. PhD thesis, University of Malaya.

Wong, Kee Lou (2005) Effect of boundry conditions on damage detection / Wong Kee Lou. Masters thesis, Universiti of Malaya.

Wong, Siau Dhing (2013) Suspension of concentrated fine particles with novel axial and radial impellers / Wong Siau Dhing. Masters thesis, University of Malaya.

Wong, Wei Ru (2015) Long range surface plasmon based biosensor for dengue virus detection / Wong Wei Ru. PhD thesis, University of Malaya.

Wu, Ling (2020) Integrating finance dictionary in lexicon-based approach with machine learning algorithm to analyse the impact of OPEC news sentiment on financial market / Wu Ling. Masters thesis, Universiti Malaya.

Y

Yang, Kang Yi (2002) A study of perceptions and practices on knowledge management of Malaysian small and medium-sized enterprises / Yang Kang Yi. Masters thesis, University of Malaya. .

Yang , Jianlei (2021) Synthesis of starch-based bioplastics reinforced with lignocellulosic fibers / Yang Jianlei. PhD thesis, Universiti Malaya.

Yap, Seong Shan (1999) Laser emissions from dye-doped poly(vinyl alcohol) film / Yap Seong Shan. Masters thesis, University of Malaya.

Yap, Soon Poh (2015) Effect of fiber in enhancement of mechanical properties and structural behaviors of oil palm shell concrete / Yap Soon Poh. PhD thesis, University of Malaya.

Yap, Yen (2009) Non-selective area doping of rare-earth material with co-doping / Yap Yen. Masters thesis, University of Malaya.

Yee, Kwong Cheong (1997) A hot-press moulded poly(methylmethacrylate) matrix for solid-state dye lasers / by Yee Kwong Cheong. Masters thesis, University of Malaya.

Yee, Maxine Swee Li (2004) Synthesis and characterization of nanostructured iron oxide in zeolite matrices / Yee Swee Li, Maxine. Masters thesis, University of Malaya.

Yeo, Wei Hong (2017) Prediction of oxide scale growth and thermo-mechanical stress-strain of austenitic steel and nickel-based alloy tubes in ultra-supercritical power plant / Yeo Wei Hong. PhD thesis, University of Malaya.

Yew, Ming Chian (2011) Investigation on water-borne intumescent fire protective coatings for steel / Yew Ming Chian. Masters thesis, Universiti Malaya.

Yew, Ming Kun (2015) Mechanical properties and durability of fibre reinforced oil palm shell high strength lightweight concrete / Yew Ming Kun. PhD thesis, University of Malaya.

Yew, Ming Kun (2012) Mechanical properties and impact resistance of hybrid fibre-reinforced high strength concrete / Yew Ming Kun. Masters thesis, University of Malaya.

Yii, Shie Chuong (2007) Modelling and simulation of full car passive suspension systems / Yii Shie Chuong. Undergraduates thesis, University of Malaya.

Yip, Chi Kiong (2004) Examinations web services system using .NET framework / by Yip Chi Kiong. Masters thesis, University of Malaya.

Yoon, Li Wan (2015) Production of cellulase and ethanol using pretreated sugarcane bagasse via an in situ saccharification and fermentation system / Yoon Li Wan. PhD thesis, University of Malaya.

Yu , Li Ming (2021) Dual-band Doherty power amplifier with the improvement of reactance compensation technique for LTE frequency operations / Yu Li Ming. Masters thesis, Universiti Malaya.

Yung , Chee Liang (2021) Life cycle assessment for the production of refined palm products and palm-based biofuels / Yung Chee Liang. PhD thesis, Universiti Malaya.

Yusliza , Yusof (2019) Synthesis and characterization of multiwalled carbon nanotubes-silver nanoparticles reinforced polyvinyl alcohol nanocomposites (PVA/MWNT-AgNP) as high permittivity materials / Yusliza Yusof. PhD thesis, Universiti Malaya.

Yusuf Suleiman , Dambatta (2018) Grinding of Si3N4 ceramic using nano-particles suspended in vegetable oil based lubricants / Yusuf Suleiman Dambatta. PhD thesis, Universiti Malaya.

Yuvaraj, Ramasamy (2021) Biomechanical determinants of shuttlecock speed in the forehand jumping smash by elite male Malaysian badminton players / Yuvaraj Ramasamy. Masters thesis, Universiti Malaya.

Z

Zafirah , Zakaria (2024) Lower limb muscle responses by transcranial magnetic stimulation-evoked KNEE extension using mechanomyography / Zafirah Zakaria. Masters thesis, Universiti Malaya.

Zahra, Kalantar (2012) Properties of bituminous mix and binder modified with waste polyethylene terephthalate / Zahra Kalantar. Masters thesis, University of Malaya.

Zhang , Ke (2024) Information fusion and data augmentation with deep features for a deep learning-based baby cry recognition / Zhang Ke. PhD thesis, Universiti Malaya.

Zhang , Longjian (2024) Formulation of a novel lightweight foamed composite based on by-product gypsum / Zhang Longjian. PhD thesis, Universiti Malaya.

Ziba Hedayat , Nasab (2020) Synthesis and in vitro studies of polycaprolactone-coated superparamagnetic iron oxide nanoparticles for magnetic hyperthermia therapy / Ziba Hedayat Nasab. PhD thesis, Universiti Malaya.

Zou , Chuanlong (2024) Fatigue behavior analysis and life prediction of CFRP-strengthened reinforced concrete structures / Zou Chuanlong. PhD thesis, Universiti Malaya.