Items where Division is "Faculty of Engineering" and Year is 2018

A

A. , Jannifar (2018) Automatic impulse response for experimental modal analysis on running harmonics condition / A. Jannifar. PhD thesis, University of Malaya.

Abbas Siddiqui, Mohammed (2018) Design of a medium scaled air vehicle flapping type / Abbas Siddiqui Mohammed. Masters thesis, University of Malaya.

Abdirahman, Hadi Omar (2018) Positional parameters of EMGfor upper limb amputations / Abdirahman Hadi Omar. Masters thesis, Universiti Malaya.

Abdul, Mannan (2018) Tribological investigation of tetrahedral diamond-like carbon (ta-C DLC) coatings using vegetable oil containing anti-wear additives / Abdul Mannan. Masters thesis, Universiti Malaya.

Abdul Aziz Saleh, Mahfoudh Ba Wazir (2018) Spoken Arabic digits recognition using deep learning / AbdulAziz Saleh Mahfoudh Ba Wazir. Masters thesis, University of Malaya.

Abdul Faiz , Yusoff (2018) A study of thermal comfort perception to local residence of tropical country of Malaysia / Abdul Faiz Yusof. Masters thesis, University Malaya.

Abdul Mannan, Dadu (2018) Model predictive control based on Lyapunov function and near state vector selection of four-leg inverter / Abdul Mannan Dadu. Masters thesis, University of Malaya.

Abdullah, Al Noman (2018) Optical mibrobottle resonator for formaldehyde (CH2O) liquid sensing / Al Noman Abdullah. Masters thesis, University Malaya.

Abu Hanifah, Muhamad Ali (2018) Surface modification of aluminium alloy 5052 and its corrosion characterization / Abu Hanifah Muhamad Ali. Masters thesis, University of Malaya.

Abu Hasnat Mohammad , Ashfak Habib (2018) Development of a new ictal EEG source imaging technique using recursive approach for presurgical evaluation of focal epilepsy / Abu Hasnat Mohammad Ashfak Habib. PhD thesis, University of Malaya.

Adam Ikhwan, Abdul Malik (2018) Optical studies of silicon quantum dots for improving solar cells efficiency / Adam Ikhwan Abdul Malik. Masters thesis, University Malaya.

Adeleke Sakiru , Adekunle (2018) Development of bovine hydroxyapatite coating on TI6AL4V implant by plasma electrolytic oxidation / Adeleke Sakiru Adekunle. PhD thesis, University of Malaya.

Adzlan Muhaymin, Idris (2018) Tunable Q-switched laser using rose gold-based saturable absorber / Adzlan Muhaymin Idris. Masters thesis, University of Malaya.

Ag Mohd Fathi Fawwaz, Ag Mohd Tahir (2018) Application of fuzzy logic for diabetes monitoring / Ag Mohd Fathi Fawwaz Ag Mohd Tahir. Masters thesis, University Malaya.

Ahmad , Zaki (2018) Assessment of flexural behaviour of concrete beam with corroded steel rebar using acoustic emission technique / Ahmad Zaki. PhD thesis, University of Malaya.

Ahmad Aiman Ezreen, Abu Bakar (2018) Feasibility studies for offshore application of cross axis wind turbine / Ahmad Aiman Ezreen Abu Bakar. Masters thesis, University of Malaya.

Ahmed Mohammed, Nasser Albadwi (2018) Comparative study of the relationship between manual and scanning methods for spinal braces / Ahmed Mohammed Nasser Albadwi. Masters thesis, University of Malaya.

Ahmed Nasiru , Yahaya (2018) Preliminary design of ac substation grounding system using improved and evolutionary particle swarm optimisation / Ahmed Nasiru Yahaya. Masters thesis, University of Malaya.

Ainul Fatin, Muhammad Alimin (2018) Degradation analysis based on design considerations of advanced-process MOSFET / Ainul Fatin Muhammad Alimin. Masters thesis, University of Malaya.

Alias, Ismail (2018) Experience, impact and needs related to urban heat island phenomenon in industrial areas / Alias Ismail. Masters thesis, University of Malaya.

Aliff Firdaus, Mat Yusoff (2018) Assessment of predominant noise sources and workers exposure in downstream oil and petrochemical industries in Malaysia / Aliff Firdaus Mat Yusoff. Masters thesis, University of Malaya.

Alireza , Yaghoubi Taemeh (2018) Probing into the evolution of a polymorphic semiconductor at nanoscale / Alireza Yaghoubi Taemeh. Masters thesis, University of Malaya.

Almujtaba Osama, Ali Mohammed (2018) Modelling and simulation of thermoelectric air cooling / Almujtaba Osama Ali Mohammed. Masters thesis, University of Malaya.

Amed Abood Faraq, Al-Haddad (2018) Finite time sliding mode control for piezoelectric actuators / Ahmed Abood Faraq Al-Hadad. Masters thesis, University of Malaya.

Ameen Mohammed, Salih Ameen (2018) Dynamic behaviour and hydraulic performance of reaction turbines in embankment dams / Ameen Mohammed Salih Ameen. PhD thesis, University of Malaya.

Amirah, Khalid (2018) Magnetic resonance imaging based 3D models of left ventricular wall thickness and dyssynchrony in acute myocardial infarction / Amirah Khalid. Masters thesis, Universiti Malaya.

Amirah Nadiah, Roslan (2018) Feasibility study of plasma electrolytic oxidation (PEO) on Tio2, nanotubes fabrication / Amirah Nadiah Roslan. Masters thesis, University of Malaya.

Amirhoushang, Zaferanlo (2018) Evaluation and optimization of efficiency of power plants / Amirhoushang Zaferanlo. Masters thesis, University of Malaya.

Anand, Ganason (2018) Design and development on automated pneumatic bumper driven by brake actuation / Anand Ganason. Masters thesis, University of Malaya.

Andrea, Valerie Law (2018) Strategies for preventing fire in high-rise residential buildings / Andrea Valerie Law. Masters thesis, University of Malaya.

Angel , Richard (2018) Surface modification of aluminium-zinc alloy (AA7075) and its corrosion characteristics / Angel Richard. Masters thesis, University of Malaya.

Annas, Alamshah (2018) Design and performance evaluation of a double stator single rotor radial flux pm generator / Annas Alamshah. Masters thesis, University of Malaya.

Arniza, Fitri (2018) Hydro-morphodynamic responses of detached breakwater in mangrove rehabilitation project / Arniza Fitri. PhD thesis, University of Malaya.

Azira, Khalil (2018) Development of a registration framework for echocardiography and computed tomography cardiovascular image fusion / Azira Khalil. PhD thesis, University of Malaya.

Azwin, Kamarulzaman (2018) Steam turbine performance under variation of inlet temperature in a steam power plant / Azwin Kamarulzaman. Masters thesis, University of Malaya.

B

Bala Murugan, Chandran (2018) Effects of pressure on steam turbine performance in a small scale power plant / Bala Murugan Chandiran. Masters thesis, University of Malaya.

C

Chan , Bee Ting (2018) Image-based flow analysis and fluid structure simulation using 3D computational models of myocardial infarction patients / Chan Bee Ting. PhD thesis, University of Malaya.

Chan , Kok Wai (2018) An investigation of grading margin violation in coordinating overcurrent relay / Chan Kok Wai. Masters thesis, University of Malaya.

Charlene Angela, J.N. Sundraraj (2018) Safety, health and environment hazard control in a Malaysian performing arts theatre production / Charlene Angela J.N. Sundraraj. Masters thesis, Universiti of Malaya.

Chee, Chun Khoon (2018) Assessment of water quality indices for selected Malaysian river / Chee Chun Khoon. Masters thesis, University of Malaya.

Chin, Jun Hao (2018) Optimization of preliminary grounding system design for AC substation using modified evolutionary particle swarm optimization / Chin Jun Hao. Masters thesis, University of Malaya.

Chin, Wei Ken (2018) Computational study of vortex induced vibration performance with coupled bluff splitter body and elastic plate model / Chin Wei Ken. Masters thesis, University of Malaya.

Choong , Choe Earn (2018) Magnesium silicate impregnation on palm-shell activated carbon powder for enhanced heavy metal adsorption / Choong Choe Earn. PhD thesis, University of Malaya.

Christopher James , Fearday (2018) Development and analysis of a flapping mechanism for biomimetic micro air vehicle / Christopher James Fearday. PhD thesis, University of Malaya.

Chu, Yung Jeh (2018) Conceptual design and performance analysis of a biomimetic wind turbine inspired by the Dryobalanops aromatica seed / Chu Yung Jeh. Masters thesis, University of Malaya.

D

Daniel Tang , Kuok Ho (2018) Safety performance measurement framework for offshore oil and gas platforms in Malaysia / Daniel Tang Kuok Ho. PhD thesis, University of Malaya.

Darren Ashwin, De Silva (2018) Structural and moadl analysis of rail vehicle car body using finite element method / Darren Ashwin De Silva. Masters thesis, University of Malaya.

Dinesh, Murgis (2018) Incorporation of safety, health and environmental aspects for medical devices in Malaysia / Dinesh Murgis. Masters thesis, University of Malaya.

E

Eliyana, Akram (2018) Environmental management system for small business: A case study at a shell petrol filling station, Dziyalite Resources Sdn. Bhd. / Eliyana Akram. Masters thesis, University of Malaya.

Ethar Yahya , Salih (2018) Preparation and characterization of ZnO/ZnAl2O4 mixed metal oxide as an effective anode materials for dye-sensitized photodetector / Ethar Yahya Salih. PhD thesis, University of Malaya.

F

Farahiyah , Jasni (2018) Configuration and analysis of piezoelectric-based in socket sensory system for transfemoral prosthetic Gait detection / Farahiyah Jasni. PhD thesis, University of Malaya.

Farhana, Arzu (2018) Numerical modelling of horizontal axis tidal turbine with variable length blade / Farhana Arzu. Masters thesis, Universiti Malaya.

Farid Esmaeili , Motlagh (2018) Evaluation of neurophysiological properties among methadone treatment subjects: EEG and ERP study / Farid Esmaeili Motlagh. PhD thesis, University of Malaya.

Farihahusnah , Hussin (2018) Solar powered electrocoagulation processes for PB(II) removal using novel electrode materials and configurations / Farihahusnah Hussin. PhD thesis, University of Malaya.

Farshad , Golshan (2018) Non-invasive diagnosis of osteoarthritis using Vibroarthrography approach / Farshad Golshan. Masters thesis, University of Malaya.

Fauziah, Che Mat (2018) Graphene oxide polymer film as q-switcher and mode-locker in 1.5 micron region /Fauziah Che Mat. Masters thesis, University of Malaya.

Fuad Y. M. , Abutaha (2018) Engineering properties of normal and high strength concrete containing palm oil clinker / Fuad Y. M. Abutaha. PhD thesis, University of Malaya.

G

Gao , Wei (2018) Cost-benefit analysis and emission reduction of energy efficient lighting / Gao Wei. Masters thesis, University of Malaya.

Gary, Tan (2018) Effect of Oxidation temperature on the thin film samarium (III) oxide growth on germanium subtrate / Gary Tan. Masters thesis, University of Malaya.

Ghulamullah , Khan (2018) Heat Transfer To Fiber Suspensions - Studies Of Particle Characterization And Fouling And Corrosion Mitigation / Ghulamullah Khan. PhD thesis, University of Malaya.

Gwani , Mohammed (2018) Design and testing of a novel building integrated cross axis wind turbine / Gwani Mohammed. PhD thesis, University of Malaya.

H

Hairuddin, Nasri (2018) A study on ohsas 18001: 2007 implementation in tl offshore sdn bhd / Hairuddin Nasri. Masters thesis, University of Malaya.

Haiyam Mohammed , Abdalraheem Alayan (2018) Synthesis of carbon nanomaterials on impregnated powdered activated carbon for removal of organic compounds from water / Haiyam Mohammed Abdalraheem Alayan. PhD thesis, University of Malaya.

Haliza, Abdul Aziz (2018) Fatty esteramine production via heterogeneous transesterification of palm based methyl palmitate and triethanolamine / Haliza Abdul Aziz. Masters thesis, University of Malaya.

Hamid , Sinaei (2018) Behavior of RC beam-column connections strengthened with externally bonded FRP composites / Hamid Sinaei. PhD thesis, University of Malaya.

Hammad , Ahmad Ainuddin (2018) A comparative study of energy consumption between various hospitals in Malaysia / Hammad Ahmad Ainuddin. Masters thesis, University of Malaya.

Harsaheb Singh, Sarjit Singh (2018) Quantifying carbon footprint reduction by converting food waste to liquid compost / Harsaheb Singh Sarjit Singh. Masters thesis, University Malaya.

Hartini, Mahmood (2018) Application of electrophoretic deposition in capturing heavy metals from industrial wastewater to enhance health and environment aspects / Hartini Mahmood. Masters thesis, University of Malaya.

Hasanuddin , Mohd Ibrahim (2018) Design and development of automatic evaporation pan system for hydrological station / Hasanuddin Mohd Ibrahim. Masters thesis, University of Malaya.

Hazizi Akmar, Mukhtar (2018) Ageing of sidewall rubber compounds / Hazizi Akmar Mukhtar. Masters thesis, University of Malaya.

Hazlihan , Haris (2018) Generation of ultra-short pulse lasers using graphene and topological insulator based 2D nanomaterials / Hazlihan Haris. PhD thesis, Universiti Malaya.

Hazrul Izwan, Hussein (2018) Load flow, largest motor starting, short circuit & protection relay coordination in gas compressor station / Hazrul Izwan Hussein. Masters thesis, University of Malaya.

Hetherin , Karuppiah (2018) Neodymium oxide thin film gate oxide on silicon substrate / Hetherin Karuppiah. PhD thesis, University of Malaya.

Hidayah , Mohd Khalid (2018) Biological and mechanical performance of TI-6AL-4V implant superplastically embedded with hydroxyapatite in animal / Hidayah Mohd Khalid. PhD thesis, University of Malaya.

Ho , Fu Haw (2018) Development of a material efficiency strategy selection model for electrical and electronic manufacturing industry / Ho Fu Haw. PhD thesis, University of Malaya.

Ho , Kai Keong (2018) Automotive evalution complementraty tool for recoverability and reusability / Ho Kai Keong. Masters thesis, University of Malaya.

Hooman , Monajemi (2018) Model updating and damage detection of frame structures using output-only measurements / Hooman Monajemi. PhD thesis, University of Malaya.

How , Heoy Geok (2018) Fuel injection parameters study for low exhaust emissions of a common-rail diesel engine fueled with different biodisesels' blend / How Heoy Geok. PhD thesis, University of Malaya.

I

Ibrahim Abdulrahman, Mahmood (2018) Mode locked erbium doped fiber laser using zinc oxide thin film as saturable absorber / Ibrahim Abdulrahman Mahmood. Masters thesis, University of Malaya.

Ibrahim Hussein, Adebayo (2018) Engineering properties of pervious concrete containing palm oil clinker aggregate / Ibrahim Hussein Adebayo. PhD thesis, University of Malaya.

Ihwan , Ghazali (2018) Development of design guideline incorporating cultural value consideration for green product / Ihwan Ghazali. PhD thesis, University of Malaya.

Indera Shah Reza, Govinathan (2018) Green initiative to reduce carbon emission for aeroplanes using Malaysia Airlines Berhad as a case study / Indera Shah Reza Govinathan. Masters thesis, University of Malaya.

J

Jagadisa, Rajarathnam (2018) Spot welding quality check using artificial intelligence / Jagadisa Rajarathnam. Masters thesis, University of Malaya.

Janash, S.Pathamnathan (2018) Heat transfer analysis in underground cable tunnel using computational fluid dynamics / Janash S.Pathamnathan. Masters thesis, University of Malaya.

Ja’far Saifeddin , Abdelhafiz Jallad (2018) Load shedding scheme for islanded distribution network with flexible load selection and power changes / Ja’far Saifeddin Abdelhafiz Jallad. PhD thesis, University of Malaya.

Julie Norazreen , Mat Azahar (2018) Determination of steam quality and its affecting parameters on a steam turbine / Julie Norazreen Mat Azahar. Masters thesis, University of Malaya.

Julirose , Gonzales (2018) Genetic algorithm optimization of product design for environmental impact reduction / Julirose Gonzales. PhD thesis, University of Malaya.

K

Karen Bong , Hui Ju (2018) Natural ventilation design of UNHCR family tent / Karen Bong Hui Ju. Masters thesis, University of Malaya.

Katrina , D. Dambul (2018) Characterisation of drawing parameters for fabrication of flat fibers / Katrina D. Dambul. PhD thesis, University of Malaya.

Kevin Kumar, Santiago George (2018) Performance analysis of various domestic lighting luminaires / Kevin Kumar Santiago George. Masters thesis, University of Malaya.

Khairi A. M., Elrmali (2018) Investigation on Stand-Alone Solar System for rural electrification / Khairi A.M. Elrmali. Masters thesis, University of Malaya.

Khaled Nedal, Mahmoud Sobh (2018) The positional parameter of EMG for transtibial prosthetic users / Khaled Nedal Mahmoud Sobh. Masters thesis, Universiti Malaya.

Khalidah, Ahmad Kamil (2018) Layout design for mass customisation production: An action based case study in small enterprise / Khalidah Ahmad Kamil. Masters thesis, Universiti Malaya.

Kong , Pei San (2018) A novel hydrophobic ZrO2-SiO2 based heterogeneous acid catalyst for the esterification of glycerol with oleic acid / Kong Pei San. PhD thesis, University of Malaya.

Kugaanesaan, Murthy (2018) Efficient water management system in pharmaceutical manufacturing premises / Kugaanesaan Murthy. Masters thesis, University of Malaya.

L

Lee , Jin Chai (2018) Engineering properties and shear behaviour of high strength lightweight aggregate concrete incorporating oil-palm-boiler clinker / Lee Jin Chai. PhD thesis, University of Malaya.

Lee , Siew Cheng (2018) Application of geotube breakwater for muddy coastline protection in Peninsular Malaysia / Lee Siew Cheng. PhD thesis, University of Malaya.

Lim, Shin Fong (2018) Heat transfer analysis of underground Maju Cable Tunnel / Lim Shin Fong. Masters thesis, University of Malaya.

Lim , Hong Cheet (2018) Automated impact device based on phase synchronisation assessment for the enhancement of impact-synchronous modal analysis during operation / Lim Hong Cheet. PhD thesis, University of Malaya.

Liow , Chee Shing (2018) A study on modulation techniques for 5g / Liow Chee Shing. Masters thesis, University of Malaya.

Lizaroziyanti, Yusri (2018) Hazard identification and evaluation in solar photovoltaic installation process of a selected energy solution provider company / Lizaroziyanti Yusri. Masters thesis, University of Malaya.

Loo, Zi Zhen (2018) Characterisation and properties of calcium phosphate bioceramic derived from animal bones / Loo Zi Zhen. Masters thesis, University of Malaya.

Low , Yan Jie (2018) Deposition and characterization of germanium nitride film using different thermal nitridation temperature / Low Yan Jie. Masters thesis, University of Malaya.

Lu , Li (2018) Optimisation of automatic generation control performance in two-area power system with pid controllers using mepso / Lu Li. Masters thesis, University of Malaya.

M

Ma , Li Ya (2018) Design and analysis of novel low-voltage low loss RF-MEMS switch / Ma Li Ya. PhD thesis, University of Malaya.

Mageswaran, Murugiya (2018) Application of material flow cost accounting (MFCA) in microalgae manufacturing company in Malaysia / Mageswaran Murugiya. Masters thesis, University of Malaya.

Mahmoud Hazzaa , Mohammed Ahmed (2018) Ultrafast erbium doped fiber lasers using 2D nanomaterial based saturable absorbers / Mahmoud Hazzaa Mohammed Ahmed. PhD thesis, University of Malaya.

Mahmoud Sarhan, Saddam Own (2018) Study of residual stress and microstructure evolution in magnesium alloy (WE43) due to deformation process via (PTCAP) / Mahmoud Sarhan Saddam Own. Masters thesis, University of Malaya.

Mahshuri , Yusof (2018) Mechanical and thermo-physical properties of polymesodabengalensis reinforced polymer-matrix composites / Mahshuri Yusof. PhD thesis, University of Malaya.

Malar, Kandasamy (2018) Awareness among students, teachers and parents on safety compliances in primary and secondary schools in Malaysia / Malar Kandasamy. Masters thesis, University of Malaya.

Malihah , Amiri Roudan (2018) Synthesis of eggshell-derived hydroxyapatite and its deposition on titanium by electrophoretic method / Malihah Amiri Roudan. PhD thesis, Universiti Malaya.

Maryam , Mousavi (2018) Scheduling of automated guided vehicles in a flexible manufacturing system / Maryam Mousavi. PhD thesis, University of Malaya.

Marziehalsadat, Jazyeri Shooshtari (2018) Finite and infinite singular arc in Chemotherapy schedulling using optimal control theory / Marziehalsadat Jazayeri Shooshtari. Masters thesis, University of Malaya.

Maziah , Borhanuddin (2018) Awareness perceptions among managements, teachers and school staffs related to safety, health and environment aspects in special education primary schools / Maziah Borhanuddin. Masters thesis, University of Malaya.

Mazlyne , Mat Akat (2018) Rotational natural frequency indentification of a rotor-shaft system by using inertial measurement unit / Mazlyne Mat Akat. Masters thesis, University of Malaya.

Md Morshed, Alam (2018) A dynamic wireless electric vehicle charging system with uniform coupling factor and negligible power / Md Morshed Alam. Masters thesis, University of Malaya.

Md Ovik, Raihan (2018) Enhancement of thermoelectric properties for doped skutterudites based on CoSb3 through ball milling parametric optimization / Md Ovik Raihan. Masters thesis, University of Malaya.

Md. Rabiul, Islam (2018) Soil erosion prediction based on ANFIS and RUSLE model / Md. Rabiul Islam. Masters thesis, University of Malaya.

Mehdi , Zomorodian (2018) Development and application of a dynamic conflict resolution method for integrated water resources management / Mehdi Zomorodian. PhD thesis, University of Malaya.

Mehran , Homayounfar (2018) Multi-model integration in a decision support system as an approach for river basin management / Mehran Homayounfar. PhD thesis, University of Malaya.

Meisam, Parsa Pour (2018) Whispering gallery mode of coated micro-bottle resonator using acrylate polymer for humidity sensing / Meisam Parsa Pour. Masters thesis, University of Malaya.

Mir Toufikur, Rahman (2018) Optimal charging coordination of plug-in electric vehicle incorporating capacitor and OLTC operation / Mir Toufikur Rahman. Masters thesis, University of Malaya.

Moe , Win (2018) Development of mesoscopic imaging system for surface inspection / Moe Win. PhD thesis, University of Malaya.

Mohamad Arif, Muahzim (2018) Work fatigue and physiological symptoms in different occupations of high-elevation construction workers / Mohamad Arif Muahzim. Masters thesis, University of Malaya.

Mohamad Izzudin , Hussein Shah (2018) Development of damage identification scheme using de-noised modal frequency response function data with artificial neural network / Mohamad Izzudin Hussein Shah. Masters thesis, University of Malaya.

Mohamad Saufi , Supar (2018) Hazard identification and risk assessment at a selected petrol station in Klang Valley / Mohamad Saufi Supar. Masters thesis, University of Malaya.

Mohamad Syafie , Mahmood (2018) Quantum modelling of organic materials for electronics, thermoelectric, and photoluminescent applications / Mohamad Syafie Mahmood. PhD thesis, University of Malaya.

Mohamad Zihin , Mohd Zain (2018) Application of swarm intelligence optimization on bio-process problems / Mohamad Zihin Mohd Zain. Masters thesis, University of Malaya.

Mohamed I, Hamed Elgadari (2018) Role of inert gas to reduce mechanical defects of the built object fabricated by SLM process / Mohamed I Hamed Elgadari. Masters thesis, University of Malaya.

Mohammad Fauzan , Mohammad Rohmatullah (2018) Chemical health risk assessment at private medical laboratory / Mohammad Fauzan Mohammad Rohmatullah. Masters thesis, University of Malaya.

Mohammadkazem, Ramezani (2018) Closed-form solution for stress intensity factors of semi elliptical surface cracks with different inclinations in a cylinder bar under pure tension and pure torsion / Mohammadkazem Ramezani. PhD thesis, University of Malaya.

Mohammadreza , Hamidian (2018) Effect of spiral reinforcement on axial compressive behavior of tubular steel short columns filled with normal and lightweight concretes / Mohammadreza Hamidian. PhD thesis, University of Malaya.

Mohammed Gamal, Nasser Al-Zidi (2018) Functional effects of cortical auditory evoked potentials and hearing ADIS on speech perception in sensorineural hearing loss individuals / Mohammed Gamal Nasser Al-Zidi. Masters thesis, University of Malaya.

Mohd Azri, Kasdi (2018) Optimal protection relay coordination for overcurrent relays in radial system / Mohd Azri Kasdi. Masters thesis, University of Malaya.

Mohd Ezwan , Wahid (2018) Assessment of occupational noise expose among construction workers in a selected construction site in Putrajaya, Malaysia / Mohd Ezwan Wahid. Masters thesis, University of Malaya.

Mohd Fazli, Ghazali (2018) Study of stump flexion contracture towards postural stability for transtibial prosthesis users / Mohd Fazli Ghazali. Masters thesis, University of Malaya.

Mohd Fikree , Hassan (2018) Improved methods to enhance the color perception for people with color vision deficiency / Mohd Fikree Hassan. PhD thesis, University of Malaya.

Mohd Isham , Ismail (2018) KY (Kiken Yochi=predict hazard) in working habit; assessment of its implementation way and effectiveness in manufacturing factory / Mohd Isham Ismail. Masters thesis, University of Malaya.

Mohd Norshahid , Mohd Idris (2018) Computational studies on elastomeric diaphragm of membrane pump performance using purely lagrangian and coupled eulerian-lagrangian methods / Mohd Norshahid Mohd Idris. Masters thesis, University of Malaya.

Mohd Nur Ashraf, Mohd Yusoff (2018) Comparative study of ethanol and isobutanol as gasoline blend for internal combustion engine / Mohd Nur Ashraf Mohd Yusoff. Masters thesis, University of Malaya.

Mohd Rasdan , Ibrahim (2018) The effect of crumb rubber modification on the physical properties of porous asphalt / Mohd Rasdan Ibrahim. PhD thesis, University of Malaya.

Mohd Suffian, Ab Razak (2018) Dynamic analysis of automotive carbon fiber strut bar / Mohd Suffian Ab Razak. Masters thesis, University of Malaya.

Mook, Wei Tze (2018) Adsorption-electrocoagulation process for removal reactive black 5 DYE from aqueous solution / Mook Wei Tze. PhD thesis, University of Malaya.

Muhammad Afdhaluddin, Muhammad Adib (2018) Workplace stress and musculoskeletal disorder: The relative roles of psychosocial and physical risk factors / Muhammad Afdhaluddin Muhammad Adib. Masters thesis, University of Malaya.

Muhammad Azfar , Rosli (2018) Health risk assessment of brachytherapy service engineers at the selected nuclear medicine centres / Muhammad Azfar Rosli. Masters thesis, University of Malaya.

Muhammad Faisal , Javed (2018) Flexural performance of cold formed steel tube filled with oil palm clinker concrete / Muhammad Faisal Javed. PhD thesis, University of Malaya.

Muhammad Fareq , Ibrahim (2018) Design and optimization of mems accelerometer sensor for lower limb exoskeleton application / Muhammad Fareq Ibrahim. Masters thesis, University of Malaya.

Muhammad Firdaus, Darduri (2018) Feasibility study on musculoskeletal disorders and safety-related issues among maintenance workers and competent chargeman in a voltage installation / Muhammad Firdaus Darduri. Masters thesis, University of Malaya.

Muhammad Hafiz , Mohd Yatim (2018) An investigation on vibration impact during construction bore piling activity on public receptors in Klang Valley Mass Rapid Transit Serdang project / Muhammad Hafiz Mohd Yatim. Masters thesis, University of Malaya.

Muhammad Hasibur, Rashid Chayon (2018) Efficient radio resource management through coordinated multipoint transmission and carrier aggregation for LTE-advanced / Muhammad Hasibur Rashid Chayon. PhD thesis, University of Malaya.

Muhammad Hassan, Rehman (2018) Optimization of MEMS piezo-electric sensor for smart textile application / Muhammad Hassan Rehman. Masters thesis, University of Malaya.

Muhammad Iqbal , Masri (2018) Indoor air quality assessment in Klang Valley public hospitals: A proposal to improve Malaysian hospitals IAQ standard / Muhammad Iqbal Masri. Masters thesis, University of Malaya.

Muhammad Usman , Hanif (2018) Nonlinear vibration based modeling for damage detection of reinforced concrete beams / Muhammad Usman Hanif. PhD thesis, University of Malaya.

Muhammad Zulkifli, Abd Hamid (2018) Transformer design optimization using nested loop / Muhammad Zulkifli Abd Hamid. Masters thesis, University of Malaya.

Muhsin , Abdul Mohammed (2018) Pattern classification of human interactions from videos / Muhsin Abdul Mohammed. Masters thesis, University of Malaya.

Mumuney Nurullahi , Lekan (2018) Optimization of load frequency control permancein two-area power system with PID controller using ICA and GSA algorithms / Mumuney Nurullahi Lekan. Masters thesis, University of Malaya.

Mustapha , Mohammed Bello (2018) The effect of solid carriers in fluidized bed for fenton process in treating recalcitrant wastewaters / Mustapha Mohammed Bello. PhD thesis, University of Malaya.

N

Nadia Hazwani, Mohd Nasir (2018) A study on fouling during harvesting of Chlorella vulgaris using microfiltration / Nadia Hazwani Mohd Nasir. Masters thesis, Universiti Malaya.

Nang Khin, Chaw Sint (2018) Thermal efficiency of nanofluid-based flat plate solar collector / Nang Khin Chaw Sint. PhD thesis, University of Malaya.

Nasim Sarrafi, Aghdam (2018) Earthquake site response analyses for soil conditions of several cities in Malaysia / Nasim Sarrafi Aghdam. Masters thesis, University of Malaya.

Ng, Kai Wern (2018) Fabrication, testing and performance enhancement of a small scale tidal current turbine / Ng Kai Wern. Masters thesis, Universiti Malaya.

Ng , Chui Kim (2018) Effect of manganese oxide dopant and sintering on the properties of scandia stabilized zirconia / Ng Chui Kim. PhD thesis, University of Malaya.

Ng , Wee Lit (2018) Evanescent field exposed microstructure fibers for optical sensing / Ng Wee Lit. PhD thesis, University of Malaya.

Ng , Yap Han (2018) Performance comparison between LQG and PID controllers for HDD's servo timing control system / Ng Yap Han. Masters thesis, University of Malaya.

Niaz, Bahadur Khan (2018) Numerical modeling and analysis of flow around stationary and oscillating circular cylinder / Niaz Bahadur Khan. PhD thesis, University of Malaya.

Noor Asilah, Yaacob (2018) Power quality analysis based on root mean square and discrete fourier transform / Noor Asilah Yaacob. Masters thesis, University of Malaya.

Noor Shah Rizal, Abdul Manap (2018) Optimal coordination of overcurrent relay protection using evolutionary programming / Noor Shah Rizal Abdul Manap. Masters thesis, University of Malaya.

Norazliani , Md Sapari (2018) Load shedding scheme based on frequency and ranked stability index considering optimal selectivity of load in islanded distribution system / Norazliani Md Sapari. PhD thesis, University of Malaya.

Norazwan , Md Nor (2018) A framework for data-driven fault detection and identification with multiscale kernel fisher discriminant analysis in chemical process systems / Norazwan Md Nor. PhD thesis, University of Malaya.

Norhidayah, Haji Nor Hassan (2018) Energy discharge capability of surge arrester for 132 kV double circuit transmission line in Malaysia / Nor Hidayah Haji Nor Hassan. Masters thesis, Universiti Malaya.

Norhidayah, Nazari (2018) Awareness workplace hazards in selected university's staff / Norhidayah Nazari. Masters thesis, University of Malaya.

Norshazmira, Mat Azmi (2018) Detection of scour depth using singlemode-multimode-singlemode fiber sensor / Norshazmira Mat Azmi. Masters thesis, Universiti Malaya.

Norsiah , Sukardy (2018) Design and development of noise detector at hangar aircraft training organisation / Norsiah Sukardy. Masters thesis, University of Malaya.

Nur Ain Amirah, Rusman (2018) Performance analysis of metal hydride-based hydrogen storage system / Nur Ain Amirah Rusman. Masters thesis, University of Malaya.

Nur Aqilah, Derahman (2018) The effects of energy density on the mechanical properties of SS316L produced by selective laser melting / Nur Aqilah Derahman. Masters thesis, Universiti Malaya.

Nur Atiqah, Surib (2018) Design and fabrication of solar light responsive new metal organic frameworks for photocatalysis / Nur Atiqah Surib. Masters thesis, University of Malaya.

Nur Salwa , Abdul Rasid (2018) Design of experiment approach in municipal wastewater treatment through adsorption of activated carbon / Nur Salwa Abdul Rasid. Masters thesis, University of Malaya.

Nur Syamimi, Mustapa (2018) Quantitative risk assessment of anhydrous ammonia leakage and on site emergency plan at Bintulu industrial park / Nur Syamimi Mustapa. Masters thesis, University of Malaya.

Nurasyeera , Rohaizat (2018) Flapping wing mechanism development and control / Nurasyeera Rohaizat. Masters thesis, University of Malaya.

Nurhusna Najwa, Hussin (2018) Quantifying waste reduction and revenue saved based from converting food waste to liquid compost / Nurhusna Najwa Hussin. Masters thesis, University of Malaya.

Nurliana , Abu Bakar (2018) Classification of defect types in XLPE cable joints using partial discharge measurement / Nurliana Abu Bakar. Masters thesis, University of Malaya.

Nursyahirah, Adnan (2018) Investigation on ablution (wudhuk) workstation design for wheelchair users in Malaysia / Nursyahirah Adnan. Masters thesis, University of Malaya.

Nurul Aida Farhana, Othman (2018) Device characterization based on stressor, geometric and process design considerations of fet technology / Nurul Aida Farhana Othman. Masters thesis, University of Malaya.

Nurul Ain , Abdul Latiff (2018) Optimization of zinc oxide surge arrester design in reducing leakage current / Nurul Ain Abdul Latiff. PhD thesis, University of Malaya.

Nurul Farhana , Hamdan Fadel (2018) First aid kit management in selected tertiary institutions in Malaysia / Nurul Farhana Hamdan Fadel. Masters thesis, University of Malaya.

Nurul Hidayah, Keria (2018) Cultural dimension as an influencer factor on work statisfaction / Nurul Hazirah Keria. Masters thesis, University of Malaya.

Nurul Liyana, Kamaruzaman (2018) Effects of Zn and A1 on corrosion characteristics of Sn-1.0Ag-0.5Cu alloys / Nurul Liyana Kamaruzaman. Masters thesis, University of Malaya.

Nurul Shuhadah, Mazlan (2018) Steel toe cap boot usage and the prevalence to plantar fasciitis among industrial workers / Nurul Syuhada Mazlan. Masters thesis, University of Malaya.

Nusrat , Hoque (2018) Simulation of strengthened reinforced concrete beam debonding behaviour using global energy balance approach / Nusrat Hoque. PhD thesis, University of Malaya.

Nuurul Syahierah, Othman (2018) Theoretical analysis of effective conductivity of metal foams with thermal interface material / Nuurul Syahierah Othman. Masters thesis, University Malaya.

Nuzaima , Che Mood (2018) Surface water quality assessment for sustainable water management in Varsity Lake, University Malaya / Nuzaima Che Mood. Masters thesis, University of Malaya.

O

Oii, Chin Hui (2018) Risk assessment of selected wastewater treatment plant in Klang Valley / Ooi Chin Hui. Masters thesis, University of Malaya.

Ola Subhi , Waheed Badran (2018) Network reconfiguration and DG sizing incorporating optimal switching sequence for system improvement / Ola Subhi Waheed Badran. PhD thesis, University of Malaya.

Omar Ali , Mohammad Shindi (2018) Hybrid optimal control-swarm intelligence for optimization of selected cancer chemotherapy model / Omar Ali Mohammad Shindi. Masters thesis, Universiti Malaya.

P

Phan, Choon Kit (2018) Enhancement of the design of air-conditioning heat exchangers circuits / Phan Choon Kit. Masters thesis, University of Malaya.

Phoon , Sin Ye (2018) Modelling and simulation of spine layout design for flexible manufacturing system in digital factory platform / Phoon Sin Ye. Masters thesis, Universiti Malaya.

Pooyan Alinaghi, Hosseinabadi (2018) Finite time control of remotely operated vehicle / Pooyan Alinaghi Hosseinabadi. Masters thesis, University of Malaya.

Pragash Nair, Guruvairapan (2018) Assessment of noise exposure in indoor firearm shooting range at police headquarters / Pragash Nair Guruvairapan. Masters thesis, University of Malaya.

Premdass, Deva Ray (2018) Study the corrosion behaviour of aluminium alloy 5052 in Croton Megalocarplus and Coconut Biodiesel / Premdass Deva Ray. Masters thesis, University of Malaya.

Q

Qamar Fairuz , Zahmani (2018) Validation of thermal enhancement in micro channel heat using numerical analysis / Qamar Fairuz Zahmani. Masters thesis, University of Malaya.

R

Rad, Sadri (2018) Synthesis of nanofluids containing eco-friendly functionalized carbon nanomaterials for improving heat dissipation / Rad Sadri. PhD thesis, Universiti Malaya.

Ramesh , Ramasamy (2018) Ageing oil well integrity assessment and rehabilitation / Ramesh Ramasamy. PhD thesis, University of Malaya.

Rawan, M S Soboh (2018) Graphene oxide and carbon nanotube-based saturable absorber q-switched erbium doped fiber laser / Rawan M S Soboh. Masters thesis, University of Malaya.

Reza Afshar , Ghotli (2018) Effect of impeller design on drop sizes and mass transfer in immiscible liquid-liquid system in a stirred vessel / Reza Afshar Ghotli. PhD thesis, University of Malaya.

Rusul Khaleel , Ibrahim (2018) Removal of organic pollutants from water using carbon nanotubes functionalized with deep eutectic solvents / Rusul Khaleel Ibrahim. PhD thesis, University of Malaya.

S

Saad Jawaid , Khan (2018) Analysis of orthosis with biomechanical interventions and gait modifications for medial knee osteoarthritis patients / Saad Jawaid Khan. PhD thesis, University of Malaya.

Sabeur , Nassereddine (2018) A new switching algorithm based on single-phase modulator for Z-source inverters with reduced computation time and enhanced output voltage / Sabeur Nassereddine. PhD thesis, University of Malaya.

Sajedeh Sadat , Ghazizadeh Hashemi (2018) Safe disposal of Coal Bottom Ash using cement based solidification and stabilization techniques / Sajedeh Sadat Ghazizadeh Hashemi. PhD thesis, University of Malaya.

Saktiyaramana, Karpayah (2018) The optical properties of alumina and tirania naofluids / Saktiyaramana Karpayah. Masters thesis, University Of Malaya.

Salmaliza , Salleh (2018) Evaluation of solidified and stabilized shipyard abrasive blasting waste as construction material / Salmaliza Salleh. PhD thesis, University of Malaya.

Sana Sulaiman , Hamid Al-asaadi (2018) Microfiber loop resonator for relative humidity and formaldehyde sensing / Sana Sualaiman Hamid Al-asaadi. Masters thesis, University Of Malaya.

Sardar Kashif , Ur Rehman (2018) Evaluation of multifunctional properties of graphene based cement composites / Sardar Kashif Ur Rehman. PhD thesis, University of Malaya.

Sarveswaran, Subramaniam (2018) Computational study of air ventilation in high tension electrical cable tunnel / Sarveswaran Subramaniam. Masters thesis, University of Malaya.

See , Kwan Wern (2018) Comparison of mechanical properties of hydroxyapatite derived from different additive powders with conventional sintering / See Kwan Wern. Masters thesis, University of Malaya.

Seow , Khai Tze (2018) The performance of evacuated tube solar collector (ETSC) using ceo / water nanofluid / Seow Khai Tze. Masters thesis, University Of Malaya.

Seyed Mohsen , Mousavi (2018) Solving the integrated inventory supply chain problems using meta-heuristic methods / Seyed Mohsen Mousavi. PhD thesis, University of Malaya.

Shah Rizal, Mohd Shaher (2018) Design and development of automation system for precision approach path indicator (PAPI) in airfield lighting / Shah Rizal Mohd Shaher. Masters thesis, University of Malaya.

Shahrir Razey , Sahamir (2018) Evaluation of hybrid self-assembled liquid crystal systems for potential application in solar thermoelectric generator / Shahrir Razey Sahamir. PhD thesis, University of Malaya.

Shalini Devi, Ramaiya (2018) Corrosion characterization of optimized Zr02-Sio2 mixed nanotubes coated on aluminium alloy AA3003 / Shalini Devi Ramaiya. Masters thesis, University of Malaya.

Sharmini, Sunasee (2018) Removal of Bisphenola A applying sonophotocatalysis / Sharmini Sunasee. Masters thesis, University of Malaya.

Shazia, Anis (2018) Design and development of portable scoliosis device for clinical testing /Shazia Anis. Masters thesis, University of Malaya.

Siti Aisyah Syaerah, Mustapa (2018) Palm oil clinker as a novel bio-filler in intumescent fire protective coatings for steel / Siti Aisyah Syaerah Mustapa. Masters thesis, University of Malaya.

Somanaathan, Muthusamy (2018) Design and simulation of capacitive mems microphone for fully implantable cochlear implants / Somanaathan Muthusamy. Masters thesis, University of Malaya.

Somayeh , Mirzaei (2018) Carbon dioxide absorption into aqueous blends of monoethanolamine and glycerol in a packed bed column / Somayeh Mirzaei. PhD thesis, University of Malaya.

Soon, Ginny (2018) Surface modification of yttria-stabilised zirconia at nanoscale for in vitro study / Soon Ginny. PhD thesis, University of Malaya.

Suhaseni, Chelathurai (2018) Application of cleaner production strategy for reducing carbon footprint in a healthcare products manufacturing premise / Suhaseni Chelathurai. Masters thesis, University of Malaya.

Surya , Dharma (2018) Engine performance, emission and corrosion of biodiesel−bioethanol−diesel blends from Jatropha curcas‒ceiba pentandra mixed oil / Surya Dharma. PhD thesis, University of Malaya.

Suzana, Abu Bakar (2018) Reducing carbon footprint at a cement casting premise using cleaner production strategy / Suzana Abu Bakar. Masters thesis, University of Malaya.

Syufiqa Nurfatin, Rasid (2018) Effects of deformation process on residual stress and grain size of magnesium alloy ZK60 / Syufiqa Nurfatin Rasid. Masters thesis, University of Malaya.

T

Tam, Jun Hao (2018) A comparison study for active chilled beam and variable air volume systems for an office building / Tam Jun Hao. Masters thesis, University of Malaya.

Tam, Jun Hui (2018) Identification of elastic properties of composite plates using non-destructive two stages derivative based method and meta-heuristic hybrid optimization method / Tam Jun Hui. PhD thesis, University of Malaya.

Tan, Jully (2018) An integrated fuzzy analytic hierarchy process and life cycle optimization model for microalgae production / Tan Jully. PhD thesis, University of Malaya.

Tan, Li Kuo (2018) Fully automated segmentation of the left ventricle in cine cardiac magnetic resonance imaging / Tan Li Kuo. PhD thesis, University of Malaya.

Tan, Ying Ying (2018) Fish species recognition using convolutional neural network / Tan Ying Ying. Masters thesis, University of Malaya.

Tee, Yun Lu (2018) Dynamic characteristics of filled natural rubber for earthquake energy applications / Tee Yun Lu. Masters thesis, University of Malaya.

Teng , Kah Hou (2018) Fouling and its mitigation on heat exchanger surfaces by additives and catalytic materials / Teng Kah Hou. PhD thesis, University of Malaya.

Thamil Selvam, Kanniah (2018) Conceptual design of universal wireless navigation system in public amenities (internal facility) for physically blind people (disabled) / Thamil Selvam Kanniah. Masters thesis, University of Malaya.

Thavamalar, Krishnasamy (2018) Green initiatives for mass rapid transit project in Malaysia / Thavamalar Krishnasamy. Masters thesis, University of Malaya.

Ting , Chen Hunt (2018) Sintering effects and hydrothermal ageing behaviour of Yttria-stabilised zirconia with MnO2 doping / Ting Chen Hunt. PhD thesis, University of Malaya.

Tofael, Ahmed (2018) Future grid expansion planning towards cost-effective and sustainable ASEAN power grid development / Tofael Ahmed. PhD thesis, University of Malaya.

Tun Mohamad Arifin, Yahaya (2018) A study of ergonomic risk on workers performing material manual handling of activity at manufacturing industry / Tun Mohamad Arifin Yahaya. Masters thesis, University of Malaya.

V

Visnu Varatan, Arumugham (2018) Optimal control of information in social network using pontryagin's maximum/minimum principle / Visnu Varatan Arumugham. Masters thesis, University of Malaya.

W

Wan Khairul Muzammil, Abdul Rahim (2018) Design and testing of a deflector integrated cross axis wind turbine / Wan Khairul Muzammil Abdul Rahim. PhD thesis, University of Malaya.

Wan Naimah, Wan Ab Naim (2018) Characterization of the efficacy of stent graft treatment in patients with aortic dissection using computational fluid dynamics analysis / Wan Naimah Wan Ab Naim. PhD thesis, University of Malaya.

Wang, Ning (2018) Health, safety and environmental study of glass bubble application drilling and completion fluids / Wang Ning. Masters thesis, University of Malaya.

Wang, Yanru (2018) A comparative study of vibrational response based impact force localization and quantification using different types of neural networks / Wang Yanru. Masters thesis, University of Malaya.

Wang, Ying (2018) Properties and effects of crosslinked polymer on starch and polyactic acid blend / Wang Ying. Masters thesis, University Of Malaya.

Wong, Dannee (2018) Experimental investigation and constitutive modeling of randomly oriented electrospun nanofibrous membranes / Wong Dannee. PhD thesis, University of Malaya.

Y

Yeo, Jue Chuan (2018) Hybrid renewable energy: Mobile micro hydro turbine / Yeo Jue Chuan. Masters thesis, University of Malaya.

Yew, Chee Hong @ Takahiro (2018) Paper based lateral flow biosensor for detection of contaminant and infection / Yew Chee Hong @ Takahiro. Masters thesis, University of Malaya.

Yim, Yan Han (2018) Reclamation of industry wastewater as a renewable source for cooling water system: A case study for a semiconductor plant / Yim Yan Han. Masters thesis, University of Malaya.

Yong, Yan Ling (2018) Linear regression convolutional neural network for fully automated coronary lumen segmentation in intravascular optical coherence tomography / Yong Yan Yin. Masters thesis, University of Malaya.

Yusuf Suleiman , Dambatta (2018) Grinding of Si3N4 ceramic using nano-particles suspended in vegetable oil based lubricants / Yusuf Suleiman Dambatta. PhD thesis, Universiti Malaya.

Z

Zainab , Shakir Radeef (2018) Design of a piezoelectric generator for vibration energy harvesting using non ferroelectric PZnT-NT / Zainab Shakir Radeef. PhD thesis, University of Malaya.

Zeyad Abdullateef, Ibraheem Al-Dabagh (2018) Antimony telluride as a saturable absorber for generating Q-Switched and mode-locked Erbium-Doped Fiber Lasers / Zeyad Abdullateef Ibraheem Al-Dabagh. Masters thesis, University of Malaya.

Zhang, Xinyu (2018) Pattern recognition for magnetic resonance knee imaging using convolutional neural network / Zhang Xinyu. Masters thesis, University of Malaya.

Zhuang, Yuan (2018) Iris recognition using convolutional neural network / Zhuang Yuan. Masters thesis, University of Malaya.

Zulina, Zulkifeli (2018) Power improvement of wind turbine based on maximum power point tracking (MPPT) controller / Zulina Zulkifeli. Masters thesis, Universiti Malaya.