Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Thesis

Iman , Behroyan (2013) Turbulent forced convection of nanofluid in a heated tube: A Computational Fluid Dynamics (CFD) study / Iman Behroyan. Masters thesis, University of Malaya.

A. , Jannifar (2018) Automatic impulse response for experimental modal analysis on running harmonics condition / A. Jannifar. PhD thesis, University of Malaya.

Aainaa Aqilah, Baharuddin (2017) Self-assembly of synthesized 4-pentynoic acid functionalized magnetite-maghemite nanoparticles on silicon dioxide/n-type silicon substrate / Aainaa Aqilah Baharuddin. Masters thesis, University of Malaya.

Abbas Siddiqui, Mohammed (2018) Design of a medium scaled air vehicle flapping type / Abbas Siddiqui Mohammed. Masters thesis, University of Malaya.

Abdallah Ibrahim, Mohammed Hasaballa (2013) Finite element analysis of left ventricle motion and mechanical properties in three dimensions / Abdallah Ibrahim Mohammed Hasaballa. Masters thesis, University of Malaya.

Abdi Hanra , Sebayang (2020) Optimization of bioethanol production, engine performance and exhaust emissions from Manihot glaziovii and sweet sorghum in a spark ignition engine / Abdi Hanra Sebayang. PhD thesis, Universiti Malaya.

Abdul Halim, Ahmad (2014) Tribological performance of palmitic acid as lubricant additives for rotary compressor / Abdul Halim Ahmad. Masters thesis, University of Malaya.

Abdul Mannan, Dadu (2018) Model predictive control based on Lyapunov function and near state vector selection of four-leg inverter / Abdul Mannan Dadu. Masters thesis, University of Malaya.

Abdul Rahman , Mallah (2021) Exploitation of Plasmon resonance phenomenon for the improvement of direct absorption solar collector performance / Abdul Rahman Mallah. PhD thesis, Universiti Malaya.

Abdul Razzak, Kabbara (2021) Study of drag reduction by using guar gum and gum Arabic mixtures / Abdul Razzak Kabbara. Masters thesis, Universiti Malaya.

Abdulgaphur , Athani (2022) Numerical analysis of multistenosed multiphase patient’s specific left coronary artery subjected to fluid structure interaction / Abdulgaphur Athani. PhD thesis, Universiti Malaya.

Abdullah, Al-Mamoon (2017) Study on the thermal performance of a multi-layer structural green roof panel / Abdullah-Al-Mamoon. Masters thesis, University of Malaya.

Abdullahi Aliyu , Alhaji (2017) Design and development of an integrated mixing and injection moulding machine for micro metal parts / Abdullahi Aliyu Alhaji. PhD thesis, University of Malaya.

Abu Hanifah, Muhamad Ali (2018) Surface modification of aluminium alloy 5052 and its corrosion characterization / Abu Hanifah Muhamad Ali. Masters thesis, University of Malaya.

Adam Ikhwan, Abdul Malik (2018) Optical studies of silicon quantum dots for improving solar cells efficiency / Adam Ikhwan Abdul Malik. Masters thesis, University Malaya.

Adamu Yusuf , Abdullahi (2019) Development of A 6-DOF 3D printed industrial robot for teaching and learning / Adamu Yusuf Abdullahi. Masters thesis, University of Malaya.

Adeleke Sakiru , Adekunle (2018) Development of bovine hydroxyapatite coating on TI6AL4V implant by plasma electrolytic oxidation / Adeleke Sakiru Adekunle. PhD thesis, University of Malaya.

Adib Zulfadhli, Mohd Alias (2019) Integration of simulation for ergonomics assessment in operation control centre (railway industries) / Adib Zulfadhli Mohd Alias. Masters thesis, University Malaya.

Adnan, Roseli (2012) Water injection system for power augmentation and emission control for hydrogen-fuelled compression ignition engine / Adnan Roseli. PhD thesis, University of Malaya.

Adrian Chung , Ning Hann (2021) Study of Schottky and Poole-Frenkel conduction mechanism in Fe304-gamma-Fe2O3/SiO2/n-type Si system / Adrian Chung Ning Hann. Masters thesis, Universiti Malaya.

Afshin, Mazandarany (2012) Electricity generation and consumption in Iran and the role of nuclear power for sustainable energy / Afshin Mazandarany. PhD thesis, University of Malaya.

Afshin , Aslian (2021) Research on concentrated photovoltaic thermal and daylighting (CPVTD) systems using round and flat optical fibers / Afshin Aslian. PhD thesis, Universiti Malaya.

Ahmad , Amiri (2017) Functionalization and exfoliation of bulk graphite into few-layer graphene sheets for improved heat dissipation / Ahmad Amiri. PhD thesis, University of Malaya.

Ahmad Aiman Ezreen, Abu Bakar (2018) Feasibility studies for offshore application of cross axis wind turbine / Ahmad Aiman Ezreen Abu Bakar. Masters thesis, University of Malaya.

Ahmad Fazlizan, Abdullah (2012) The design and testing of an exhaust air energy recovery wind turbine generator / Ahmad Fazlizan Abdullah. Masters thesis, University of Malaya.

Ahmad Hafiz, Jafarul Tarek (2019) Flow simulation analysis of maju cable tunnel ventilation system / Ahmad Hafiz Jafarul Tarek. Masters thesis, University of Malaya.

Ahmad Kazwini, Abd Wahab (2011) Application of solar energy in Malaysia / Ahmad Kazwini Abd Wahab. Masters thesis, University of Malaya.

Ahmad Najimuddin, Ismail (2019) Prediction of bubble velocities in air-water two-phase flow using void fraction profiles / Ahmad Najimuddin Ismail. Masters thesis, University Malaya.

Ahmed Faizal , Ayub Khan (2022) Valorization of disposable Covid-19 personal protection equipment through the thermo-chemical process / Ahmed Faizal Ayub Khan. Masters thesis, Universiti Malaya.

Aima Mariaty , Ahmad (2023) Performance evaluation of an in-pipe hydropower system with vertical axis parallel turbine / Aima Mariaty Ahmad. Masters thesis, Universiti Malaya.

Airul Sharizli, Abdullah (2017) Development of collision avoidance warning system for heavy vehicles featuring adaptive minimum safe distance / Airul Sharizli Abdullah. PhD thesis, University of Malaya.

Aisswarya, Kumaran (2016) Rough surface preparation through chemical etching for super-hydrophobicity / Aisswarya Kumaran. Masters thesis, University of Malaya.

Aizzat Sazali, Yahaya Rashid (2014) Design modifications of dynamically loaded structures using structural optimization / Aizzat Sazali Yahaya Rashid. Masters thesis, University of Malaya.

Alexander Chee , Hon Cheong (2021) A study of copper oxide-zirconia produced by conventional and pressureless two-step sintering process / Alexander Chee Hon Cheong. PhD thesis, Universiti Malaya.

Ali Bashir, Mohamed Bashir (2012) Energy analysis for food industries in Malaysia / Mohamed Bashir Ali Bashir. Masters thesis, University of Malaya.

Ali Hassan Abdelrazek , Elsayed (2021) Evaluation of turbulent forced convection heat transfer and pressure drop of nanofluids flow in different closed conduit configurations / Ali Hassan Abdelrazek Elsayed. PhD thesis, Universiti Malaya.

Ali Mohammed, Moqdad Ijam (2017) Thermophysical and electro-optical properties of carbon nanomaterials based nanofluids / Ali Mohammed Moqdad Ijam. PhD thesis, Universiti Malaya.

Ali Naem , S Alamry (2022) Mechanical and thermo-electrical properties evaluation of helical multiwall carbon nanotube enhanced carbon composite / Ali Naem S Alamry. PhD thesis, Universiti Malaya.

Ali Shahir, Shawkat (2019) Feasibility of diesel-biodiesel-alcohol blend fuels for diesel engine / Ali Shahir Shawkat. Masters thesis, University Malaya.

Ali Wadi Abbas, Al-Fatlawi (2015) Feasibility analysis on the potential of photovoltaic applications in Peninsular Malaysia / Ali Wadi Abbas Al-Fatlawi. PhD thesis, University of Malaya.

Alireza , Esmaeilzadeh (2022) Study of thermal performance and properties of 1-pyrene carboxylic-acid functionalized graphene nanofluids in a heat pipe / Alireza Esmaeilzadeh. PhD thesis, Universiti Malaya.

Alireza , Rafieerad (2017) Mechanical and biological evaluations of smart antibacterial nanostructured TI-6AL-7NB implant / Alireza Rafieerad. PhD thesis, University of Malaya.

Amin, Kamyar (2013) Effect of nanofluids on heat transfer characteristics of a heat pipe / Amin Kamyar. Masters thesis, Universiti Malaya.

Amin, Kazemzadeh (2012) Structural analysis of power augmented guide vane for the vertical axis wind turbine / Amin Kazemzadeh. Masters thesis, University of Malaya.

Amir Reza, Akhiani (2013) Product Benchmarking Using DFA and DFD Tools / Amir Reza Akhiani. Masters thesis, University of Malaya.

Amirah Nadiah, Roslan (2018) Feasibility study of plasma electrolytic oxidation (PEO) on Tio2, nanotubes fabrication / Amirah Nadiah Roslan. Masters thesis, University of Malaya.

Anand, Ganason (2018) Design and development on automated pneumatic bumper driven by brake actuation / Anand Ganason. Masters thesis, University of Malaya.

Ananthasayanam Subramani , Sharath (2019) Design and development of heat exchanger based on open cell metal foam / Ananthasayanam Subramani Sharath. Masters thesis, Universiti Malaya.

Andi , Mulkan (2024) Engine performance and emission of biodiesel from waste cooking oil using jackfruit peel waste derived catalyst / Andi Mulkan. PhD thesis, Universiti Malaya.

Ang, Bee Chin (2011) Synthesis and characterization of maghemite nanoparticles dispersed within silica matrix / Ang Bee Chin. PhD thesis, University of Malaya.

Ang , Ming Lok (2020) Determining the severity of obstructive sleep apnea (OSA) by using numerical analysis / Ang Ming Lok. Masters thesis, University of Malaya.

Angel , Richard (2018) Surface modification of aluminium-zinc alloy (AA7075) and its corrosion characteristics / Angel Richard. Masters thesis, University of Malaya.

Arnon, Lerdwongpaisan (2013) Automated tyre sorting system using mitsubishi FX3U PLC controller / Arnon Lerdwongpaisan. Masters thesis, University of Malaya.

Arrul, Jagindar (2021) Heat transfer to nanofluids flow in variable circular and annular passage configuration / Arrul Jagindar. Masters thesis, Universiti Malaya.

Arslan, Ahmed (2017) Effect of laser textured DLC coated AISI 52100 steel on the tribological behavior for engine applications / Arslan Ahmed. PhD thesis, University of Malaya.

Ashraful, Haque (2011) Development of high-temperature lead-free solder for semiconductor chip attachment / Ashraful Haque. Masters thesis, University of Malaya.

Asif, Khan (2020) Synthesis of eco-friendly nanofluids for enhancement of heat transfer and application in different flow configuration passages / Asif Khan. Masters thesis, Faculty of Engineering.

Asmalina, Mohamed Saat (2016) Synthesis and characterization of partially phosphorylated poly (Vinyl Alcohol) – aluminum phosphate (PPVA – AlPO4) nanocomposite / Asmalina Mohamed Saat. PhD thesis, University of Malaya.

Atefeh, Amindoust (2013) Development of an integrated FIS-DEA method for sustainable supplier selection in manufacturing / Atefeh Amindoust. PhD thesis, University of Malaya.

Atikah, Aman (2017) Design and analysis of wudu' (ablution) workstation for elderly in Malaysia / Atikah Aman. Masters thesis, University of Malaya.

Auwal , Shamsu Tukur (2019) Effect of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti joints / Auwal Shamsu Tukur. PhD thesis, Universiti Malaya.

Ayaz , Asif (2019) Fabrication of mold parts using fused deposition modeling and vacuum casting / Ayaz Asif. Masters thesis, Universiti Malaya.

Azadeh, Ghadimi (2013) Stability and thermal conductivity of low concentration titania nanofluids / Azadeh Ghadimi. PhD thesis, University of Malaya.

Azida, Azmi (2012) Preparation and characterization of copper/copper-coated silicon carbide composites for electronic packaging / Azida Azmi. Masters thesis, University of Malaya.

Azwin, Kamarulzaman (2018) Steam turbine performance under variation of inlet temperature in a steam power plant / Azwin Kamarulzaman. Masters thesis, University of Malaya.

Babooraman, Shanmuganathan (2020) Development of bio-based 2T engine oil in marine engine application / Babooraman Shanmuganathan. Masters thesis, Universiti Malaya.

Badruzzaman, Kamaruzaman (2019) Computational analysis of water surge phenomenon at power station / Badruzzaman Kamaruzaman. Masters thesis, University of Malaya.

Bakr Saeed Riziq , Daraghmeh (2019) Design and development of automation system for (clothes folding machine) / Bakr Saeed Riziq Daraghmeh. Masters thesis, University of Malaya.

Bala Murugan, Chandran (2018) Effects of pressure on steam turbine performance in a small scale power plant / Bala Murugan Chandiran. Masters thesis, University of Malaya.

Balqis Erizy , Zainal (2021) Stress analysis of mechanical seal in API 610 pump / Balqis Erizy Zainal. Masters thesis, Universiti Malaya.

Behzad, Rismanchi (2013) Energy management implementation in an office building via peak shaving method / Behzad Rismanchi. PhD thesis, University of Malaya.

Brandon Goh, Han Hoe (2019) Ultrasonic assisted oil extraction and biodiesel synthesis of spent coffee ground / Brandon Goh Han Hoe. Masters thesis, University Malaya.

Ch'ng, Shiau Ying (2014) Coupling between diffusion of biodiesel and large deformation in elastomers: from experimental investigation to constitutive modeling / Ch'ng Shiau Ying. PhD thesis, University of Malaya.

Chai, Ai Bao (2013) Swelling of elastomers in biodiesel and the resulting mechanical response under cyclic loading / Chai Ai Bao. PhD thesis, University of Malaya.

Chai, Yuan (2020) Analysis of body and tail of a flapping drone / Chai Yuan. Masters thesis, University of Malaya.

Cheah , Mei Yee (2019) Physicochemical and tribological analysis of chemically modified microalgae oil blends for Malaysian conditions / Cheah Mei Yee. PhD thesis, Universiti Malaya.

Chen , Shilei (2021) Operational structural damage identification using de-noised modal feature in machine learning / Chen Shilei. Masters thesis, Universiti Malaya.

Chew, Chee Sean (2011) Performance of Ni-W alloys as barrier film between lead free solder and copper substrate / Chew Chee Sean. Masters thesis, University of Malaya.

Chew, Kelvin Wai Jin (2015) Effect of zirconium diboride addition on the properties of sintered Y-TZP ceramic / Kelvin Chew Wai Jin. PhD thesis, University of Malaya.

Chew, King Vee (2013) Comparison of corrosion of magnesium and aluminium in palm biodiesel / Chew King Vee. Masters thesis, Universiti Malaya.

Chin, Chee Lung (2004) Synthesis and characterization of MgCuZn ferrites by co-precipitation and mixed oxide route / Chin Chee Lung. Masters thesis, Universiti Malaya.

Chin, Christopher Kong Ming (2015) Solid state synthesis of forsterite and its mechanical properties / Christopher Chin Kong Ming. PhD thesis, University of Malaya.

Chin, Chuan Kong (2012) Feasibility study on implementation of medium temperature solar thermal energy in industrial processes: a case study in Malaysia / Chin Chuan Kong. Masters thesis, University of Malaya.

Chin, Wei Ken (2018) Computational study of vortex induced vibration performance with coupled bluff splitter body and elastic plate model / Chin Wei Ken. Masters thesis, University of Malaya.

Chin, Yi Ming (2018) Analysis of campus building energy optimization based on energy plus software simulation / Chi Yi Ming. Masters thesis, University of Malaya.

Chong , Hue Yee (2023) Hybridization of metaheuristic algorithm in training radial basis function with dynamic decay adjustment for condition monitoring / Chong Hue Yee. PhD thesis, Universiti Malaya.

Chong , Su Sin (2016) Development of fibre optic sensors for dye concentration measurement / Chong Su Sin. PhD thesis, Universiti Malaya.

Choy, De Jen (2020) Feasibility study on concentrated solar power plants in Malaysia / Choy De Jen. Masters thesis, University of Malaya.

Christopher Clement, Rusli (2021) Flow characteristic investigation of a novel power-augmented water kinetic turbine for energy capturing from river / Christopher Clement Rusli. Masters thesis, Universiti Malaya.

Christopher Tseu, Zia Chyuan (2019) Surface modification of aluminium alloy series 6 (AA6061 T657) and its corrosion characteristics / Christopher Tseu Zia Chyuan. Masters thesis, University of Malaya.

Chu, Yung Jeh (2018) Conceptual design and performance analysis of a biomimetic wind turbine inspired by the Dryobalanops aromatica seed / Chu Yung Jeh. Masters thesis, University of Malaya.

Chua , Wen Hong (2021) High-performance room-temperature ammonia gas sensor based on molybdenum trioxide nanostructure / Chua Wen Hong. Masters thesis, Universiti Malaya.

Daniel Tang , Kuok Ho (2018) Safety performance measurement framework for offshore oil and gas platforms in Malaysia / Daniel Tang Kuok Ho. PhD thesis, University of Malaya.

Darren Ashwin, De Silva (2018) Structural and moadl analysis of rail vehicle car body using finite element method / Darren Ashwin De Silva. Masters thesis, University of Malaya.

Darshan, Namasivayam (2021) Design and evaluation of a novel hip prosthesis integrated with a truss system / Darshan Namasivayam. Masters thesis, Universiti Malaya.

Davood , Hooshyar (2019) Development of accelerator and brake pedal position comfort ability base on Malaysian population / Davood Hooshyar. Masters thesis, University of Malaya.

Davoud Mashhadi, Jafarlou (2016) Study on equal channel angular extrusion of circular cross section components and its application for joining dissimilar metals / Davoud Mashhadi Jafarlou. PhD thesis, University of Malaya.

Deenadayalini , Retnam (2021) Implementation of fuel saving techniques among airliners in Malaysia / Deenadayalini Retnam. Masters thesis, Universiti Malaya.

Deng, Xinchen (2020) Analysis of one way valve mechanism for wings of a flapping drone / Deng Xinchen. Masters thesis, University of Malaya.

Diaa Abdelmonem , Mahmoud Abidou (2017) Numerical modeling and simulation of material removal in laser drilling of thin metal sheets using meshfree collocation methods / Diaa Abdelmonem Mahmoud Abidou. PhD thesis, University of Malaya.

Dick Chang, Jia Hau (2021) Design of an intelligent car air conditioning louver for efficient cooling of car interior compartment / Dick Chang Jai Hau. Masters thesis, Universiti Malaya.

Diniesh Naidu, Thannimalai (2019) Numerical analysis of marine riser vortex-induced vibration with helical strake suppression device / Diniesh Naidu Thannimalai. Masters thesis, University of Malaya.

Edzrol Niza , Mohamad (2013) Analysis of general characteristics of transmission error in helical gears and its effects on gear noise and vibration / Edzrol Niza Mohamad. PhD thesis, University of Malaya.

Ehsan , Shekarian (2017) Forward and backward fuzzy economic order quantity models considering learning theory / Ehsan Shekarian. PhD thesis, University of Malaya.

Eida Nadirah , Roslin (2013) A model for full-blown implementation of lean manufacturing system in Malaysian automative industry / Eida Nadirah Roslin. PhD thesis, University of Malaya.

Eko , Deprianto (2021) Pre-collision safety risk assessment using multi-body simulation / Eko Deprianto. Masters thesis, Universiti Malaya.

Elaine Why , Siew Kuan (2022) Production of sustainable bio-jet fuel via single-step deoxygenation of palm-based feedstock / Elaine Why Siew Kuan. PhD thesis, Universiti Malaya.

Elham , Montazer (2019) Heat transfer in turbulent nanofluids: Separation flow studies and development of novel correlations / Elham Montazer. PhD thesis, Universiti Malaya.

Emad, Sadeghinezhad (2015) Study of thermo-physical properties, heat transfer and frictional loss of GNPS, NDG and rGO nanofluids in closed conduit flow / Emad Sadeghinezhad. PhD thesis, University of Malaya.

Emilia, Norazmi (2021) Factor analysis on spur gear failure using computational simulation / Emilia Norazmi. Masters thesis, Universiti Malaya.

Erfan , Salami (2021) Design, fabrication and analysis of novel dragonfly-bioinspired, flapping wing system for a micro air vehicle / Erfan Salami. PhD thesis, Universiti Malaya.

Ethar Yahya , Salih (2018) Preparation and characterization of ZnO/ZnAl2O4 mixed metal oxide as an effective anode materials for dye-sensitized photodetector / Ethar Yahya Salih. PhD thesis, University of Malaya.

Fahad, Zahid (2023) Development of a semi-automated impact device based on human behaviour recognition for in service modal analysis of structures / Fahad Zahid. PhD thesis, Universiti Malaya.

Farah Arina , Ibrahim (2023) Improvement of heat transfer in tube heat exchanger via passive flow generator / Farah Arina Ibrahim. Masters thesis, Universiti Malaya.

Farhood, Sarrafzadeh Javadi (2013) Heat transfer and energy efficiency analysis of domestic refrigerator using nanorefrigerant / Farhood Sarrafzadeh Javadi. Masters thesis, University of Malaya.

Farhood Sarrafzadeh , Javadi (2022) Prototype development and performance analysis of latent heat thermal battery integrated with solar collector / Farhood Sarrafzadeh Javadi. PhD thesis, Universiti Malaya.

Fatemeh, Rasooli Haghighi (2013) Earned Value Management System in Manufacturing Industry / Fatemeh Rasooli Haghighi. Masters thesis, University of Malaya.

Fatimah Nadhirah, Isa (2017) Machinery risk assessment during warehouse racking installation / Fatimah Nadhirah Isa. Masters thesis, University of Malaya.

Fatin Syazana , Jamaludin (2013) High aspect ratio microfilling for MEMS using metal nanopowder / Fatin Syazana Jamaludin. Masters thesis, University of Malaya.

Foad, Nasouri (2013) Thermal performance analysis of solar thermal system integrated with phase change material / Foad Nasouri. Masters thesis, University of Malaya.

Gao , Wei (2018) Cost-benefit analysis and emission reduction of energy efficient lighting / Gao Wei. Masters thesis, University of Malaya.

Gary, Tan (2018) Effect of Oxidation temperature on the thin film samarium (III) oxide growth on germanium subtrate / Gary Tan. Masters thesis, University of Malaya.

Ghulamullah , Khan (2018) Heat Transfer To Fiber Suspensions - Studies Of Particle Characterization And Fouling And Corrosion Mitigation / Ghulamullah Khan. PhD thesis, University of Malaya.

Goh, Jenn Hsen (2019) The feasibility of developing an embossed fiberglass filter media pack for air filtration devices / Goh Jenn Hsen. Masters thesis, University of Malaya.

Goh, Kian Wei (2017) Effect of pH and calcination temperature on co-precipitated indium oxide nanoparticles / Goh Kian Wei. Masters thesis, University of Malaya.

Goh, Ying Xin (2015) Electrodeposition and characterization of SN-BI lead-free soldier alloys / Goh YingXin. PhD thesis, University of Malaya.

Goh , Kian Wei (2024) Synthesis and characterization of eggshellderived hydroxyapatite by microwave-assisted wet chemical precipitation method / Goh Kian Wei. PhD thesis, Universiti Malaya.

Goo, Wei Hong (2020) Investigations of air-water multiphase flow in tubes: Computational fluid dynamics / Goo Wei Hong. Masters thesis, University of Malaya.

Govindaraju, Kalimuthu (2015) Influences of seepage into walls, curvature and bifurcation on pressure drop calculation in idealized arteries : A computational fluid dynamics approach / Govindaraju Kalimuthu. PhD thesis, University of Malaya.

Gurbinder , Singh (2021) Effect of heating on bonding characteristics for copper wire bond technology / Gurbinder Singh. PhD thesis, Universiti Malaya.

Gwani , Mohammed (2018) Design and testing of a novel building integrated cross axis wind turbine / Gwani Mohammed. PhD thesis, University of Malaya.

Hamed, Khajeh Arzani (2012) Numerical simulation of forced convection heat transfer of laminar cuo-water nanofluid flow through a horizontal 180 degree curve pipe / Hamed Khajeh Arzani. Masters thesis, Universiti Malaya.

Hamed Khajeh, Arzani (2016) Heat transfer enhancement by carbon nanostructure based nanofluids in an annular heat exchanger / Hamed Khajeh Arzani. PhD thesis, University of Malaya.

Hamid, Taheri (2013) Fracture mechanics analysis of geometrically nonlinear thin plates by FEM /Hamid Taheri. Masters thesis, University of Malaya.

Hamid , Nalbandian Abhar (2013) Dynamic analysis of the tower crane / Hamid Nalbandian Abhar. Masters thesis, University of Malaya.

Hammad , Ahmad Ainuddin (2018) A comparative study of energy consumption between various hospitals in Malaysia / Hammad Ahmad Ainuddin. Masters thesis, University of Malaya.

Han, Dan (2020) Fluid flow analysis of low-altitute agricultural UAV pesticide spraying device / Han Dan. Masters thesis, University of Malaya.

Hanna Sofia , Saleh Hudin (2024) Simulation and experimental study of multi nozzle arrangements on electrospun jets and their resultant nanofibrous properties / Hanna Sofia Saleh Hudin. PhD thesis, Universiti Malaya.

Harizam, Mohd Zin (2013) Optimisation of laser cutting parameters of oil palm wood / Harizam Mohd Zin. Masters thesis, University of Malaya.

Hartomo, - (2013) Development of ergonomic-axiomatic design parameters for virtual environment / Hartomo. PhD thesis, University of Malay.

Hasanuddin , Mohd Ibrahim (2018) Design and development of automatic evaporation pan system for hydrological station / Hasanuddin Mohd Ibrahim. Masters thesis, University of Malaya.

Hasbullah, Hashim (2021) Site suitability study for recycling plastic plant / Hasbullah Hashim. Masters thesis, Universiti Malaya.

Hassan, Alli (2015) A design methodology incorporating user requirements and preferences for a successful product / Hassan Alli. PhD thesis, University of Malaya.

Hassanuddin, Ismail (2013) Development of boronized duplex stainless steel mini gear through superplastic deformation / Hassanuddin Ismail. Masters thesis, University of Malaya.

Hazem, Mohamed (1998) Nonlinear modeling and control of a spark ignition engine idle speed / Hazem Mohamed. Masters thesis, University of Malaya.

Hazizi Akmar, Mukhtar (2018) Ageing of sidewall rubber compounds / Hazizi Akmar Mukhtar. Masters thesis, University of Malaya.

Hee, Ay Ching (2012) Preparation of ferrite layers by electrophoretic deposition / Hee Ay Ching. Masters thesis, University of Malaya.

Hetherin , Karuppiah (2018) Neodymium oxide thin film gate oxide on silicon substrate / Hetherin Karuppiah. PhD thesis, University of Malaya.

Hidayah, Mohd Khalid (2011) Embedment of hydroxyapatite (HA) on titanium alloy (Ti6AI4V) via superplastic deformation method for medical application / Hidayah Mohd Khalid. Masters thesis, University of Malaya.

Hidayah , Mohd Khalid (2018) Biological and mechanical performance of TI-6AL-4V implant superplastically embedded with hydroxyapatite in animal / Hidayah Mohd Khalid. PhD thesis, University of Malaya.

Ho , Fu Haw (2018) Development of a material efficiency strategy selection model for electrical and electronic manufacturing industry / Ho Fu Haw. PhD thesis, University of Malaya.

Ho , Kai Keong (2018) Automotive evalution complementraty tool for recoverability and reusability / Ho Kai Keong. Masters thesis, University of Malaya.

Hoora , Mazaheri (2020) Chicoreus brunneus seashells as a catalyst in rice bran biodiesel production / Hoora Mazaheri. PhD thesis, Universiti Malaya.

Houman, Yarmand (2013) Computational simulation of heat transfer enhancement by using nanofluid in a rectangular heated pipe / Houman Yarmand. Masters thesis, University of Malaya.

How , Heoy Geok (2018) Fuel injection parameters study for low exhaust emissions of a common-rail diesel engine fueled with different biodisesels' blend / How Heoy Geok. PhD thesis, University of Malaya.

Hussein Togun, Abdullah (2015) Experimental and numerical study of heat transfer to nanofluid flow in sudden enlargement of annular concentric pipe / Hussein Togun Abdullah. PhD thesis, University of Malaya.

Ibrahim Hussein, Adebayo (2018) Engineering properties of pervious concrete containing palm oil clinker aggregate / Ibrahim Hussein Adebayo. PhD thesis, University of Malaya.

Ihwan , Ghazali (2018) Development of design guideline incorporating cultural value consideration for green product / Ihwan Ghazali. PhD thesis, University of Malaya.

Iman, Moazedi (2013) Computational study of thermal energy storage system based on nanoparticle enhanced phase change material / Iman Moazedi. Masters thesis, University of Malaya.

Iman Aris , Fadzallah (2024) A novel hybrid piezo-pyroelectric energy harvesting device by integration of micropatterned poly (vinylidene fluoride) using MEMS techniques / Iman Aris Fadzallah. PhD thesis, Universiti Malaya.

Indran , Kunusilin (2021) Modelling and analysis of performance for biogas fuelled gas engine using MATLAB / Indran Kunusilin. Masters thesis, Univesiti Malaya.

Irmalisa , Samsuri (2012) Constitutive modelling of Mullin's effect in swollen nitrile butadiene rubber under cyclic loading / Irmalisa Samsuri. Masters thesis, University of Malaya.

Irnie Azlin@Nur Aqilah, Zakaria (2012) Revolution of engine cooling and thermal management system / Irnie Azlin@Nur Aqilah Zakaria. Masters thesis, University of Malaya.

Iskandar, - (2013) Modeling and analysis of impact of sepak takraw ball on the player's head / Iskandar. PhD thesis, University of Malaya.

Jamal , Uddin Ahamedf (2012) Energy, exergy and heat transfer performance investigation of a vapor compression air conditioning system / Jamal Uddin Ahamed. PhD thesis, University of Malaya.

Janash, S.Pathamnathan (2018) Heat transfer analysis in underground cable tunnel using computational fluid dynamics / Janash S.Pathamnathan. Masters thesis, University of Malaya.

Jasbir Singh , Kunnan Singh (2020) Effects of polytetrafluoroethylenemicro–particles on mechanical andtribological properties of glass fiberreinforced polyoxymethylene / Jasbir Singh Kunnan Singh. PhD thesis, Universiti Malaya.

Jassinnee , Milano (2019) Biodiesel production from waste cooking oil blend with calophyllum inophyllum through microwave irradiation-assisted transesterification method / Jassinnee Milano. PhD thesis, University of Malaya.

Jayprasanth , Krishnan (2020) Study of heat transfer and friction loss of nanofluid suspension flow in square pipe heat exchanger / Jayprasanth Krishnan. Masters thesis, University of Malaya.

Jeffrey, Ng (2012) The study of thermal transfer value for medium scale mixed development in Singapore / Jeffrey Ng. Masters thesis, Universiti Malaya.

Jeffrey Chin , Kong Leon (2017) Mechanical properties of hydroxyapatite-magnesium orthosilicate composite / Jeffrey Chin Kong Leong. PhD thesis, University of Malaya.

Jegathis, Murugesu (2017) Design and analysis of frame scaffolding capacity using thickness and material as variables / Jegathis Murugesu. Masters thesis, University of Malaya.

Jonathan Teo , Kok Chiang (2021) Potential electricity savings analysis from implementing building integrated photovoltaics at an industrial plant / Jonathan Teo Kok Chiang. Masters thesis, Universiti Malaya.

Julie Norazreen , Mat Azahar (2018) Determination of steam quality and its affecting parameters on a steam turbine / Julie Norazreen Mat Azahar. Masters thesis, University of Malaya.

Julirose , Gonzales (2018) Genetic algorithm optimization of product design for environmental impact reduction / Julirose Gonzales. PhD thesis, University of Malaya.

Jusoh, Anuar (2005) Mechanical and morphological properties of polypropylene / natural rubber blending with additives / Anuar bin Jusoh. Undergraduates thesis, University of Malaya.

Kabildev , Arumainathan (2020) Heat transfer analysis of a data centre / Kabildev Arumainathan. Masters thesis, University Malaya.

Kam , Weng Joe (2022) Effect of forming speeds on coil-break formation during uncoiling of fully annealed low carbon steel sheets-a 3D finite element simulation study / Kam Weng Joe. Masters thesis, Universiti Malaya.

Kamsani, Kamal (2012) Numerical simulation of rubber panel under impact loading / Kamsani Kamal. Masters thesis, University of Malaya.

Karthikeyan, Balasubramaniam (2013) Thermal stress analysis of butt welded joint / Karthikeyan Balasubramaniam. Masters thesis, University of Malaya.

Karunan, Joseph (2017) Development of power generation system using piezoelectric and electromagnetic induction techniques on lab-on-a-disc (LOD) for localized heating / Karunan Joseph. Masters thesis, University of Malaya.

Katheres, Murugesu (2019) Flow simulation of icon city cable tunnel ventilation / Katheres Murugesu. Masters thesis, University of Malaya.

Kaviraj , Jayaraman (2019) Heat transfer and friction loss analysis of a novel eco-friendly colloidal suspension in flow passages / Kaviraj Jayaraman. Masters thesis, Universiti Malaya.

Kee , Chia Ching (2022) Development of europium-doped calcium silicate coating for bone tissue engineering applications / Kee Chia Ching. PhD thesis, Universiti Malaya.

Keong, Le-Onn (2021) Analysis of additives for bio-based engine oil for a two stroke marine engine / Keong Le-Onn. Masters thesis, Universiti Malaya.

Khairun Nisa , Khamil (2021) Modelling and development of asphalt pavement thermoelectric energy harvesting system using subterranean cooling / Khairun Nisa Khamil. PhD thesis, Universiti Malaya.

Kho, Tuck Sing (2021) Computational fluid dynamics simulation of internal fluid flow: A case of venturi effect / Kho Tuck Sing. Masters thesis, Univesiti Malaya.

Kong , Keen Kuan (2020) Hybrid non-destructive assessment for flow induced vibration piping systems using coupled fluid-structure interaction / Kong Keen Kuan. PhD thesis, Universiti Malaya.

Kong , Kok Haw (2019) Fire life and health safety investigation of an innovative ventilation system in underground parking facilities / Kong Kok Haw. PhD thesis, University of Malaya.

Leang, So Khuong (2017) Experimental study and improvement on tribological behaviors of automotive lubricants with dilution of various gasoline-bioethanol blends / Leang So Khuong. Masters thesis, University of Malaya.

Lee, Cherk Yong (2011) Performance investigation on plate heat exchanger using nanofluid as working fluid / Ler Cherk Yong. Masters thesis, University of Malaya.

Lee , Derk Huan (2019) Design and development of upscaled automated phase controlled impact device for operational modal testing / Lee Derk Huan. Masters thesis, Universiti Malaya.

Lei , Zhen Ce (2019) Formation of ZrO2 gate dielectric on Ge substrate by thermal oxidation and post annealing for metal-oxide-semiconductor devices / Lei Zhen Ce. PhD thesis, University of Malaya.

Leong, Kin Yuen (2013) Thermal and energy performance of nanofluid operated heat recovery exchanger / Leong Kin Yuen. PhD thesis, University of Malaya.

Leong , Yee Mei (2020) Microstructural characteristics and mechanical properties of Sn-Ag-Cu solders with minor additions of Al and Zn / Leong Yee Mei. PhD thesis, Universiti Malaya.

Letchumanan, Lakshmanan (2012) Heat transfer performance investigation of a water cooled chiller operated with nanofluid / Letchumanan Lakshmanan. Masters thesis, University of Malaya..

Li , Yongchuan (2024) Design guidelines for smart kitchen appliances for the elderly / Li Yongchuan. PhD thesis, Universiti Malaya.

Lim, Bing Yan (2021) Deep learning model for prediction of progressive mild cognitive impairment to Alzheimer's disease using structural MRI / Lim Bing Yan. Masters thesis, Univesiti Malaya.

Lim, Chin Seong (2021) Design and development of a multimodal self adjusting vibration energy harvesting system / Lim Chin Seong. Masters thesis, Univesiti Malaya.

Lim, Say Li (2017) Processing time estimation in precision machining industry using AI / Lim Say Li. Masters thesis, University of Malaya.

Lim, Shin Fong (2018) Heat transfer analysis of underground Maju Cable Tunnel / Lim Shin Fong. Masters thesis, University of Malaya.

Lim, Yu Dian (2013) Synthesis and characterizations of amorphous carbon nanotubes / gold particles hybrid materials / Lim Yu Dian. Masters thesis, University of Malaya.

Lim , Hong Cheet (2018) Automated impact device based on phase synchronisation assessment for the enhancement of impact-synchronous modal analysis during operation / Lim Hong Cheet. PhD thesis, University of Malaya.

Lina Syazwana , Kamaruzzaman (2023) Characterization of Sn-Bi-Co low temperature solder alloy / Lina Syazwana Kamaruzzaman. Masters thesis, Universiti Malaya.

Liu , Zongying (2019) Multi-step time series prediction using recurrent kernel online sequential extreme learning machine / Liu Zongying. PhD thesis, Universiti Malaya.

Loh, Hwei Ling (2019) Effect of Zn additions on the electrochemical migration behaviour of SAC305 solder alloys / Loh Hwei Ling. Masters thesis, University of Malaya.

Loh, Yin Kuan (2012) Experimental and computational study of stresses on outdoor piping of domestic air conditioner / Loh Yin Kuan. Masters thesis, University of Malaya.

Loo, Mei Sze (2015) Mechanical response of swollen elastomers under short and long-terms cyclic loading conditions / Loo Mei Sze. PhD thesis, University of Malaya.

Low, Pui Leng (2019) Curing characterization of pressureless sintered die attach material as leadfree salution in microelectronics packaging / Low Pui Leng. Masters thesis, University of Malaya.

Low, Shee Teng (2022) Development of visual odometry based machinery motion assessment system / Low Shee Teng. Masters thesis, Universiti Malaya.

Low , Yan Jie (2018) Deposition and characterization of germanium nitride film using different thermal nitridation temperature / Low Yan Jie. Masters thesis, University of Malaya.

Low , Yan Jie (2024) Mechanical response of bioresorbable poly (Glycolide-co-caprolactone) suture under monotonic and non-monotonic loadings / Low Yan Jie. PhD thesis, Universiti Malaya.

Lye, Ying Jie (2019) Mechanical properties and morphology of nitrile butadiene rubber (NBR) with nano cellulose crystal / Lye Ying Jie. Masters thesis, University of Malaya.

Mahak, Fazal (2013) Characterisation of viscoelastic response of swollen elastomers / Mahak Fazal. Masters thesis, University of Malaya.

Mahdi, Sparham (2015) A new technique for lubrication control based on friction conditions in CNC machine linear guideways using servomotor current signals in feed drive system / Mahdi Sparham. PhD thesis, University of Malaya.

Mahdi , Ghazvini (2012) Development and impact of fuel economy standards and labels for heavy duty vehicles in Iran / Mahdi Ghazvini. Masters thesis, University of Malaya.

Mahdieh , Zamzamzadeh (2020) Modeling of heavy vehicle braking related to accident reconstruction for a range of vehicle and road characteristics / Mahdieh Zamzamzadeh. PhD thesis, Universiti Malaya.

Mahendra, Varman (2004) Cost-efficiency analysis in support of the energy efficiency standard and label for TV sets in Malaysia / Mahendra Varman. Masters thesis, University of Malaya.

Mahmoud Zakaria Alsayed, Abdalfattah Ibrahim (2019) Laser cladding of FeCrMoCB metallic glass on nickel-free stainless-steel to develop durable and cost-effective biomedical implants / Mahmoud Zakaria Alsayed Abdalfattah Ibrahim. PhD thesis, Universiti Malaya.

Mahmudur , Rahman (2019) Pid-aco vibration controller with magnetorheological damper for wind turbine tower / Mahmudur Rahman. PhD thesis, Universiti Malaya.

Mahshuri , Yusof (2018) Mechanical and thermo-physical properties of polymesodabengalensis reinforced polymer-matrix composites / Mahshuri Yusof. PhD thesis, University of Malaya.

Mahyar, Silakhori (2012) Preparation and characterization of microencapsulated paraffin wax as PCM for thermal energy storage / Mahyar Silakhori. Masters thesis, University of Malaya.

Malihah , Amiri Roudan (2018) Synthesis of eggshell-derived hydroxyapatite and its deposition on titanium by electrophoretic method / Malihah Amiri Roudan. PhD thesis, Universiti Malaya.

Mardziah , Che Murad (2022) Properties of zinc doped hydroxyapatite bioceramic developed by using calcium precursor derived from biogenic waste / Mardziah Che Murad. PhD thesis, Universiti Malaya.

Marjan , Safarzadeh (2020) Development of b-type and multi-ion doped carbonated hydroxyapatite bioceramics / Marjan Safarzadeh. PhD thesis, Universiti Malaya.

Masoud, Kamalisarvestani (2012) The effect of smart coatings on the radiation passing through glazing / Masoud Kamalisarvestani. Masters thesis, University of Malaya.

Masoud, Sarraf (2013) Techno-economic analysis of solar home system (SHS) in Cambodia / Masoud Sarraf. Masters thesis, University of Malaya.

Mazhar, Hussain Abbasi (2013) Sensor-less vector control using adaptive observer scheme for controlling the performance of the induction motor / Mazhar Hussain Abbasi. Masters thesis, University of Malaya.

Mazlan, Shah (2013) Development of cutting tool through superplastic deformation methods on boronized duplex stainless steel / Mazlan Shah. Masters thesis, University of Malaya.

Mazlyne , Mat Akat (2018) Rotational natural frequency indentification of a rotor-shaft system by using inertial measurement unit / Mazlyne Mat Akat. Masters thesis, University of Malaya.

Md Palash , Sarker (2017) Performance and emissions analysis of jatropha and aphanamixis polystachya methyl esters and investigation of NOx additive in CI diesel engine / Md Palash Sarker. Masters thesis, University of Malaya.

Md. Fayeem , Aziz (2014) Applications of hidden Markov model and support vector machine for state estimation / Md.Fayeem Aziz. Masters thesis, University of Malaya.

Md. Masum, Billah (2014) Optimization of alcohol-gasoline blended fuel for improving performance and reducing exhaust emission of engine / Md. Masum Billah. Masters thesis, University of Malaya.

Md. Rasel, Sarkar (2019) Application of nature-inspired algorithms and artificial intelligence for optimal efficiency of horizontal axis wind turbine / Md. Rasel Sarkar. Masters thesis, University of Malaya.

Md. Ruhul , Amin (2017) Optimization of aphanamixis based biodiesel and its combustion characteristics / Md. Ruhul Amin. Masters thesis, University of Malaya.

Md. Sayem , Hossain Bhuiyan (2017) Design and development of mechanically controlled above knee prosthesis / Md. Sayem Hossain Bhuiyan. PhD thesis, University of Malaya.

Md. Yeasir , Arafat (2018) An automated vehicular license plate recognnition system for skewed images / Md. Yeasir Arafat. Masters thesis, University of Malaya.

Mehdi , Rezaei (2012) Energy performance and cost analysis of phase change materials with different melting temperature in heating systems / Mehdi Rezaei. Masters thesis, Universiti Malaya.

Mian, Muhammad Sami (2021) Microstructure and mechanical properties of porous copper and copper brazed with cu-based filler metal / Mian Muhammad Sami. Masters thesis, Universiti Malaya.

Miao , Huan (2024) Process parameters optimization via machine learning and properties characterization of ALSI10MG-316L multi-materials produced using laser powder bed fusion / Miao Huan. PhD thesis, Universiti Malaya.

Miqdad, Khairulmainif (2012) Effect of nanoparticle shapes on heat transfer characteristics and thermodynamic performance of a shell and tube heat exchanger / Miqdad Khairulmaini. Masters thesis, University of Malaya.

Mirta , Widia (2017) Maximum acceptable lifting frequency model in manual material handling task at automotive industries in Malaysia / Mirta Widia. PhD thesis, University of Malaya.

Misliana, Md Taib (2019) Study on morphology and electrical properties of graphene oxide decorated with nickel oxide for electrochemical sensor / Misliana Md Taib. Masters thesis, University of Malaya.

Mitra Akhtari, Zavareh (2015) Improving corrosion and wear resistance of carbon steel piping system in oil and gas application through thermal spray coating techniques / Mitra Akhtari Zavareh. PhD thesis, University of Malaya.

Moayad Hani Yacoub , Abu Rmilah (2016) An integrated simulation platform for a quadcopter system with fuzzy-tuned PID controllers / Moayad Hani Yacoub Abu Rmilah. Masters thesis, University of Malaya.

Mohamad Ardan , Zubir (2015) Investigation of two-phase flow behavior and patterns in horizontal and vertical pipe / Mohamad Ardan Zubir. Masters thesis, University of Malaya.

Mohamad Faizal , Rosli (2019) Tribological performance of palm oil-based lubricant with nanoparticles additive / Mohamad Faizal Rosli. Masters thesis, University of Malaya.

Mohamad Firdaus , Saharudin (2022) Wear mapping mechanism mapping for diesel-diluted biolubricant / Mohamad Firdaus Saharudin. Masters thesis, Universiti Malaya.

Mohamad Izzudin , Hussein Shah (2018) Development of damage identification scheme using de-noised modal frequency response function data with artificial neural network / Mohamad Izzudin Hussein Shah. Masters thesis, University of Malaya.

Mohamad Zaid, Mohamad Zaihirain (2021) Design and development of an image-guided vision system for robotics palletizing / Mohamad Zaid Mohamad Zaihirain. Masters thesis, Universiti Malaya.

Mohamed, Kamruzzaman (2017) Mitigation of plate end debonding in CFRP strengthened wide-flange steel I-beams under monotonic and fatigue loading / Mohamed Kamruzzaman. PhD thesis, University of Malaya.

Mohamed Bashir, Ali Bashir (2017) Thermoelectric properties of LaCo4Sb12 skutterudite materials by addition of Al, In, Ni & Te / Mohamed Bashir Ali Bashir. PhD thesis, University of Malaya.

Mohamed I, Hamed Elgadari (2018) Role of inert gas to reduce mechanical defects of the built object fabricated by SLM process / Mohamed I Hamed Elgadari. Masters thesis, University of Malaya.

Mohamed Kamaleldin , Gaffar Abbas (2022) Effect of sintering additives on the densification and mechanical properties of alumina toughened zirconia ceramic composite / Mohamed Kamaleldin Gaffar Abbas. PhD thesis, Universiti Malaya.

Mohammad, Mehrali (2015) Shape stabilized composite phase change materials for thermal energy storage systems / Mohammad Mehrali. PhD thesis, University of Malaya.

Mohammad Hossein, Mahdavifard (2013) Effects of molybdenum nanoparticles on the interface between lead-free solder and nickel substrate / Mohammad Hossein Mahdavifard. Masters thesis, University of Malaya.

Mohammad Hossein, Mahdavifard (2017) Investigation on mechanical, microstructural and thermal properties of Sn-0.7Cu and Sn-1Ag 0.5Cu solder alloys bearing Fe and Bi / Mohammad Hossein Mahdavifard. PhD thesis, University of Malaya.

Mohammad Reza, Hassan (2013) Finite element simulation of creep in swollen Nitril Butadiene Rubber (NBR) pipe under internal pressure / Mohammad Reza Hassan. Masters thesis, University of Malaya.

Mohammad Sajad , Naghavi Sanjani (2016) Theoretical and experimental investigation on heat pipe solar collector integrated with latent heat thermal energy storage / Mohammad Sajad Naghavi Sanjani. PhD thesis, University of Malaya.

Mohammed, Mahbubul Islam (2015) Effect of ultrasonication on colloidal thermophysical and rheological properties of alumina-water nanofluid / Mohammed Mahbubul Islam. PhD thesis, University of Malaya.

Mohammed , A. B. Seyam (2016) Stream flow analysis and modelling using artificial intelligence techniques / Mohammed A. B. Seyam. PhD thesis, University of Malaya.

Mohammed Mahbubul Islam, - (2012) Investigation of fundamental properties of nanorefrigerants / Mohammed Mahbubul Islam. Masters thesis, University of Malaya.

Mohd Akmal, Mhd Yusoff (2013) Design and development of remote measurement for prime mover using Arduino and FR hope RFM12B / Mohd Akmal Mhd Yusoff. Masters thesis, University of Malaya.

Mohd Aswad , Othman (2019) Numerical simulation of Telekom Malaysia (TM) server farm thermal transport phenomena using ansys fluent / Mohd Aswad Othman. Masters thesis, University of Malaya.

Mohd Azan , Mohammed Sapardi (2012) Comparative study on combustion and emission characteristics on jatropha oil biodiesel with diesel / Mohd Azan Mohammed Sapardi. Masters thesis, University of Malaya.

Mohd Bakar , Mohd Mishani (2017) Application of simplified operating deflection shape technique in machinery vibration assessment / Mohd Bakar Mohd Mishani. Masters thesis, University of Malaya.

Mohd Faizal, Fauzan (2011) Comparative exergy analysis of selected fuels for internal combustion engines / Mohd Faizal Fauzan. Masters thesis, University of Malaya.

Mohd Faizal, Fauzan (2015) Energy, heat transfer and economic analysis of flat-plate solar collector utilizing SiO2 nanofluid / Mohd Faizal Fauzan. PhD thesis, University of Malaya.

Mohd Firdaus , Manap (2017) Effect of free air ball (FAB) formation on wire bond integrity in palladium coated copper (PdCu) wire / Mohd Firdaus Manap. Masters thesis, University of Malaya.

Mohd Hafiz , Abdul Halim Shah (2013) Estimation of energy saving by nanofluid operated air conditioning system / Mohd Hafiz Abdul Halim Shah. Masters thesis, University of Malaya.

Mohd Hafizul Hilmi, Mohd Noor (2019) Development of physical ergonomics design guidelines for processing equipment in Malaysian offshore oil and gas platform / Mohd Hafizul Hilmi Mohd Noor. Masters thesis, University Malaya.

Mohd Hasnun , Arif Hassan (2012) Design of a dynamometer-engine coupling shaft / Mohd Hasnun Arif Hassan. Masters thesis, University of Malaya.

Mohd Kamar , Uddin (2017) Design of a modified class EF2 inverter for electric vehicle charging through wireless power transfer / Mohammad Kamar Uddin. Masters thesis, University of Malaya.

Mohd Noorshahril, Yaakob (2013) Design and development of automatic NGV natural gas vehicle refuelling robot / Mohd Noorshahril Yaakob. Masters thesis, University of Malaya.

Mohd Norshahid , Mohd Idris (2018) Computational studies on elastomeric diaphragm of membrane pump performance using purely lagrangian and coupled eulerian-lagrangian methods / Mohd Norshahid Mohd Idris. Masters thesis, University of Malaya.

Mohd Nur, Nurhayati (2015) The relationship between work productivity performance and variations in acute responses / Nurhayati binti Mohd Nur. PhD thesis, University of Malaya.

Mohd Nur Ashraf, Mohd Yusoff (2018) Comparative study of ethanol and isobutanol as gasoline blend for internal combustion engine / Mohd Nur Ashraf Mohd Yusoff. Masters thesis, University of Malaya.

Mohd Sayuti , Ab Karim (2013) Application of nano base lubricants in machining process for performance improvements / Mohd Sayuti Ab Karim. PhD thesis, University of Malaya.

Mohd Shahadan, Mohd Suan (2015) Synthesis and characterizations of YBa2Cu3O7-5 superconductor with added AI2O3 nanoparticles via citrate-nitrate auto-combustion reaction / Mohd Shahadan Mohd Suan. PhD thesis, University of Malaya.

Mohd Shahir, Hadzir (2022) Study of delayed cracking behaviors of hydrogen-charged SUS304L deep drawn cylindrical cups under elevated blank holding forces / Mohd Shahir Hadzir. Masters thesis, Universiti Malaya.

Mohd Syahmi, Jasman (2022) Investigation and simulation on transmission, emersion and dispersion of dust particle from point of generation / Mohd Syahmi Jasman. Masters thesis, Universiti Malaya.

Mohd Zakuan , Zabri (2019) Fabrication of spectrally selective solar power absorber material via powder metallurgy process / Mohd Zakuan Zabri. Masters thesis, University Malaya.

Mohd Zamri , Zainon (2013) Effects of vibration onto the flow structures and dynamics of gas-liquid two-phase flow / Mohd Zamri Zainon. PhD thesis, University of Malaya.

Mohd Zubir, Md Idris (2017) Performance evaluation of copper brazing using CU-NI-SN-P filler metal / Mohd Zubir Md Idris. Masters thesis, University of Malaya.

Mohd Zubir, Mohd Nashrul (2015) Production of enhanced stability colloidal system for thermal application / Mohd Nashrul bin Mohd Zubir. PhD thesis, University of Malaya.

Mohsen, Mesbah (2013) Producing ultra fine grain pure aluminum tubes using tubular channel angular pressing (TCAP) / Mohsen Mesbah. Masters thesis, University of Malaya.

Mohsen , Mesbah (2020) Microstructural evolution and mechanical properties of ultra-fine grained tubular components processed by severe plastic deformation / Mohsen Mesbah. PhD thesis, Universiti Malaya.

Morshed , Alam (2014) Computer integrated design and manufacturing of patient specific lower limb orthoses through 3D reconstruction / Morshed Alam. Masters thesis, University of Malaya.

Mostafa, Mohammadnejad (2012) Development and impact of fuel economy standards and labels for light duty vehicles in Iran / Mostafa Mohammadnejad. Masters thesis, University of Malaya.

Mubashir, Gulzar (2017) Tribological study of nanoparticles enrichedbio-based lubricants for engine piston ring–cylinder interaction / Mubashir Gulzar. PhD thesis, University of Malaya.

Muhamad Nur Irfan, Mohd Adly (2021) Influence of inhibitor on corrosion behaviour of Al-Mg alloy / Muhamad Nur Irfan Mohd Adly. Masters thesis, Universiti Malaya.

Muhamad Nurshafiq , Mohd Yunos (2019) Performance study between variable refrigerant flow and chilled water air conditioning system / Muhamad Nurshafiq Mohd Yunos. Masters thesis, Universiti Malaya.

Muhamad Razi , Samsudin (2019) Fluid dynamics study on the effect of the maximum valve lift to the flow velocity at the intake valve of gasoline engine / Muhamad Razi Samsudin. Masters thesis, University Malaya.

Muhamad Sharul Nizam, Awang (2021) Effect of blending plastic pyrolytic oil and waste cooking biodiesel on engine performance, emissions and lubricity of a small diesel engine fuel with palm oil biodiesel (B30) / Muhamad Sharul Nizam Awang. Masters thesis, Universiti Malaya.

Muhammad , Rizwan (2019) Spark plasma sintered hydroxyapatite / bioglass composite for improved biological performance / Muhammad Rizwan. PhD thesis, University of Malaya.

Muhammad 'Amir, Roslan (2019) Energy performance comparison between the variable refrigerant flow (VRT) and conventional air-conditioning and mechanical ventilation (ACMV) systems for tropical buildings / Muhammad 'Amir Roslan. Masters thesis, University Malaya.

Muhammad Ahmad Salman, Hisham (2022) Characterization and the effect of waste plastic oil in a diesel engine / Muhammad Ahmad Salman Hisham. Masters thesis, Universiti Malaya.

Muhammad Akmal , Kamarudin (2013) Fabrication and characterization of dye-sensitized solar cells incorporating polymer electrolyte liquid crystal system / Muhammad Akmal Kamarudin. Masters thesis, University of Malaya.

Muhammad Amirul Asri, Ahmad Lukman (2021) Computational fluid dynamics simulation of rotor cooling system in interior permanent magnet motor / Muhammad Amirul Asri Ahmad Lukman. Masters thesis, Universiti Malaya.

Muhammad Basril, Muhmmad Asri (2022) The effect of temperature on drawability of circular and square sheet metal drawing / Muhammad Basril Muhammad Asri. Masters thesis, University of Malaya.

Muhammad Firdaus, Darduri (2018) Feasibility study on musculoskeletal disorders and safety-related issues among maintenance workers and competent chargeman in a voltage installation / Muhammad Firdaus Darduri. Masters thesis, University of Malaya.

Muhammad Firdaus , Othman (2013) Feasibility study of TiO[2] intermediate coating layer for adhesive strength improvement / Muhammad Firdaus Othman. Masters thesis, University of Malaya.

Muhammad Hafizuddin , Zainal Abidin (2019) The impact of ignored negligible losses in engineering design: Baerodynamic drag on ET425M high speed train as study case / Muhammad Hafizuddin Zainal Abidin. Masters thesis, University of Malaya.

Muhammad Hazrie , Ibrahim (2017) Smart manufacturing: its challenge and future implementation in Malaysia / Muhammad Hazrie Ibrahim. Masters thesis, University of Malaya.

Muhammad Heikal, Hasan (2013) Analysis of electricity generation and clean coal technology development as greenhouse gas control strategy in Indonesia / Muhammad Heikal Hasan. Masters thesis, University of Malaya.

Muhammad Irfan , Asha'ari (2021) Recreation of water-cooled exhaust manifold to improve exhaust gas recirculation / Muhammad Irfan Asha'ari. Masters thesis, Universiti Malaya.

Muhammad Mujtaba , Abbas (2021) Comparative study of nanoparticles and alcoholic fuel additives with optimized synthesis of palm-sesame biodiesel using tribological and internal combustion engine testing / Muhammad Mujtaba Abbas. PhD thesis, Universiti Malaya.

Muhammad Rafi , Sulaiman (2024) Effect of support structure on part build using selective laser melting / Muhammad Rafi Sulaiman. Masters thesis, Universiti Malaya.

Muhammad Safwan, Mohd Mansor (2020) Investigation on the mechanical properties and microstructure analysis of micro-resistance spot welding between stainless steel 316L and Tl-6AL-4V / Muhammad Safwan Mohd Mansor. Masters thesis, University Malaya.

Muhammad Syamsuzzaman, Shamsuddin (2013) Investigation of the effect of layer thickness and infill material percentage on the performance of low-cost and commercial fused deposition modelling / Muhammad Syamsuzzaman Shamsuddin. Masters thesis, University of Malaya.

Muhammad Zulfattah , Zakaria (2021) Tribology, performance and emissions of a two stroke-cycle engine using bio-based lubricant / Muhammad Zulfattah Zakaria. PhD thesis, Universiti Malaya.

Muhammad Zulhiqmi , Mohd Jamil (2024) Friction stir alloying of AZ61 magnesium alloy and SPHC mild steel with ZN-CNT additive / Muhammad Zulhiqmi Mohd Jamil. Masters thesis, Universiti Malaya.

Muhammad Zulkifli, Abd Hamid (2018) Transformer design optimization using nested loop / Muhammad Zulkifli Abd Hamid. Masters thesis, University of Malaya.

Mukhtar A. Kareem, Aljadri (2013) Novel deep eutectic solvents and their application in the liquid-liquid extraction of aromatic compounds / Mukhtar A. Kareem Aljadri. PhD thesis, University of Malaya.

Murad Abdullah Khamis , Subih (2019) Developing and testing an interface pressure control system in 3d printed transtibial prosthetic socket / Murad Abdullah Khamis Subih. Masters thesis, Universiti Malaya.

Mustapha Kamil Husen , Abdul Kadir (2017) Girder deflection for lifting load / Mustapha Kamil Husen Abdul Kadir. Masters thesis, University of Malaya.

N Rajeswara Rao, Apparow (2021) Effects of new and recycle electrodes on the mechanical properties of shielded metal arc welding (SMAW) / N Rajeswara Rao Apparow. Masters thesis, Universiti Malaya.

Naderi, Sadjad (2015) Damage behavior of glass fiber reinforced plastic laminate and bovine-derived hydroxyapatite under low-velocity impact loading / Sadjad Naderi. PhD thesis, University of Malaya.

Nang Khin, Chaw Sint (2018) Thermal efficiency of nanofluid-based flat plate solar collector / Nang Khin Chaw Sint. PhD thesis, University of Malaya.

Nardia , Zubir (2012) Analysis on the future energy demand in Malaysia / Nardia Zubir. Masters thesis, Universiti Malaya.

Nashrah Hani , Jamadon (2017) Mechanical and thermal aging behaviors of lead free solder joint with addition of porous copper interlayer / Nashrah Hani Jamadon. PhD thesis, University of Malaya.

Natasha , Ahmad Nawawi (2017) Properties of calcium phosphate bioceramic prepared by solid state and chemical route / Natasha Ahmad Nawawi. PhD thesis, University of Malaya.

Naveed , Akram (2021) Thermal performance analysis of flat-plate solar collector by using carbon and metal based nanofluids / Naveed Akram. PhD thesis, Universiti Malaya.

Navid , Aslfattahi (2021) Development of novel phase change material (PCM)-based nanocomposites using emerging nanomaterials for energy storage applications / Navid Aslfattahi. PhD thesis, Universiti Malaya.

Navin, Ramasamy (2012) Study on the FAME oxidation and thermal stability of biodiesel / Navin Ramasamy. Masters thesis, University of Malaya.

Navin Kumar, Ganesan (2022) Investigations on heavy-duty gearboxes temperature and the viscosity of the lubricant through simulation and experiment method / Navin Kumar Ganesan. Masters thesis, Universiti Malaya.

Ng , Chui Kim (2018) Effect of manganese oxide dopant and sintering on the properties of scandia stabilized zirconia / Ng Chui Kim. PhD thesis, University of Malaya.

Ng , Jen Chao (2019) Graphene supported electrocatalysts for alkaline anion-exchange membrane-based direct methanol fuel cell (AAEM-DMFC) applications / Ng Jen Chao. PhD thesis, Universiti Malaya.

Ng , Qian Qing (2024) Curing profile optimization of silver epoxy die attach in ball grid array package process / Ng Qian Qing. Masters thesis, Universiti Malaya.

Ng , Yap Han (2018) Performance comparison between LQG and PID controllers for HDD's servo timing control system / Ng Yap Han. Masters thesis, University of Malaya.

Nguyen , Huu Tho (2016) Fuzzy multi-criteria analysis for machine tool selection and optimal machine loading in flexible manufacturing cell / Nguyen Huu Tho. PhD thesis, University of Malaya.

Nicklaane, Krishnamoorthy (2020) Trap-assisted tunneling mechanism of Zirconium Oxynitride (ZrON) thin film on Silicon Carbide / Nicklaane Krishnamoorthy. Masters thesis, University of Malaya.

Nik Nadia Aina , Nik Zumaihan (2020) Investigation of space-charge-limited conduction mechanisms in Fe3O4-Y-FE2O3 based on SIO2/N-type SI substrate / Nik Nadia Aina Nik Zumaihan. Masters thesis, University of Malaya.

Nik Nurul Fatima Az-Zahra , Mohd Rosli (2019) The impact of using CJC™ fine filter in diesel genset at Pulau Redang Power Station / Nik Nurul Fatima Az-Zahra Mohd Rosli. Masters thesis, Universiti Malaya.

Nik Pa, Nik Masmiati (2015) Effects of end milling cutting parameters and lubrication modes on residual stress and surface quality in medium carbon steel machining / Nik Masmiati binti Nik Pa. PhD thesis, University of Malaya.

Noor Dina , Ghazali (2013) Energy efficiency standards and labels for electric rice cookers in Malaysia / Noor Dina Ghazali. Masters thesis, University of Malaya.

Noor Zafirah , Abu Bakar (2013) Fuel savings and cost reduction of start-stop technology for an internal combustion engine / Noor Zafirah Abu Bakar. Masters thesis, University of Malaya.

Nooshin, Jabbari (2015) Development and application of technical and economic strategies in upgrading heavy oil: the case of Iran / Nooshin Jabbari. PhD thesis, University of Malaya.

Nor Aliya, Hamizi (2017) Synthesis and characterization of Mn-doped CdSe quantum dots via inverse micelle technique / Nor Aliya Hamizi. PhD thesis, University of Malaya.

Nor Hidayahti , Hasan @ Aminuddin (2013) Analysis of entropy generation in micro-mini channel operated with nanofluids for turbulent flow / Nor Hidayahti Hasan @ Aminuddin. Masters thesis, University of Malaya.

Nor Ilyana, Muhd Nordin (2017) Evaluation of corrosive environment impact on low cost Fe/Al ADDED SAC105 solder alloys / Nor Ilyana Muhd Nordin. PhD thesis, University of Malaya.

Nor Taibah, Taazim (2016) Development of titanium diboride layer through superplastic compression method /Nor Taibah Taazim. Masters thesis, University of Malaya.

Noraini, Idris (2013) Determination of heliostat normal using MATLAB / Noraini Idris. Masters thesis, University of Malaya.

Norjannah, Basan (2017) Biodiesel production from ceiba pentandra oil using enzymatic reaction / Norjannah Basan. Masters thesis, University of Malaya.

Norshamira , Mazlan (2022) Role of sulphate on corrosion inhibition of aluminium alloy in acidic environment / Norshamira Mazlan. Masters thesis, Universiti Malaya.

Norsiah , Sukardy (2018) Design and development of noise detector at hangar aircraft training organisation / Norsiah Sukardy. Masters thesis, University of Malaya.

Novita , Sakundarini (2013) Development of multi-objective optimization for high recyclability material selection in product design / Novita Sakundarini. PhD thesis, University of Malaya.

Nur Adania, Nor Azman (2022) Investigation of flow patterns and measurement of actual bubble velocity using void fraction profile in a vertical industrial scale two-phase flow channel / Nur Adania Nor Azman. Masters thesis, Universiti Malaya.

Nur Afiqah Adilah , Muhamad Khosim (2019) Investigation of the void fraction of gas-liquid two phase flow in vertically-upward channel / Nur Afiqah Adilah Muhamad Khosim. Masters thesis, University of Malaya.

Nur Amirah , Mohd Zahri (2021) Mechanical and microstructure analysis of copper to copper foam brazing using copper-tin nickel-phosphorus amorphous filler alloys / Nur Amirah Mohd Zahri. PhD thesis, Universiti Malaya.

Nur Aqilah, Derahman (2018) The effects of energy density on the mechanical properties of SS316L produced by selective laser melting / Nur Aqilah Derahman. Masters thesis, Universiti Malaya.

Nur Ayuni , Jamal (2016) Fabrication and performance evaluation of low to medium porosity closed-cell porous aluminum via powder metallurgy technique / Nur Ayuni Jamal. PhD thesis, University of Malaya.

Nur Damia , Mohd Ismail (2013) Preparation of biomineral filler and its application as biopolymer composite filler / Nur Damia Mohd Ismail. Masters thesis, University of Malaya.

Nur Hasdyanna, Hasnurashid (2020) Analysis of space-charge-limited conduction mechanisms in ZrON/SiC system / Nur Hasdyanna Hasnurashid. Masters thesis, University of Malaya.

Nur Salwa , Abdul Rasid (2018) Design of experiment approach in municipal wastewater treatment through adsorption of activated carbon / Nur Salwa Abdul Rasid. Masters thesis, University of Malaya.

Nur Yusrina , Abdullah (2013) Macro-ergonomics and musculoskeletal disorders (MSD) in multinational company / Nur Yusrina Abdullah. Masters thesis, University of Malaya.

Nur Zalynda , Zakaria (2019) Water hammer analysis on high pressure due to stopping pump / Nur Zalynda Zakaria. Masters thesis, University Malaya.

Nurehan Syamimi, Ismail (2012) Tribology study on nanosilica-filled polyurethane (PU) composite coating on polypropylene substrate / Nurehan Syamimi Ismail. Masters thesis, Universiti Malaya.

Nurfarrahain Nadia, Ahmad (2019) Effect of heat distribution and vibration on wider lead frame / Nurfarrahain Nadia Ahmad. Masters thesis, University of Malaya.

Nurfarrahain Nadia , Ahmad (2024) Development of a wearable patch forglucosemonitoring and insulin delivery / Nurfarrahain Nadia Ahmad. PhD thesis, Universiti Malaya.

Nursyahirah , Mohd Shatar (2023) Enhanced solar still performance using mix wettability surface cover and thermoelectric cooling system / Nursyahirah Mohd Shatar. PhD thesis, Universiti Malaya.

Nurul Adina, Azman (2021) Design and simulation of hybrid piezo-pyroelectric energy conversion device / Nurul Adina Azman. Masters thesis, Universiti Malaya.

Nurul Adzlin, Zainal (2019) Tribological study of polyol ester-based biolubricants and the effect of molybdenum sulphide as lubricant additives / Nurul Adzlin Zainal. Masters thesis, University of Malaya.

Nurul Azri Khalisah , Aznan (2016) Synthesis and characterization of silver nanowires via polyol process / Nurul Azri Khalisah Aznan. Masters thesis, University of Malaya.

Nurul Farhah, Shamsuddin (2021) Analysis of inflammation, metabolic and clinical markers in predicting fat mass in HIV-positive males using artificial neural network / Nurul Farhah Shamsuddin. Masters thesis, Universiti Malaya.

Nurul Izzah , Abd Rahman (2020) The relationship between mental workload and driving performance of ageing drivers / Nurul Izzah Abd Rahman. PhD thesis, Universiti Malaya.

Nurul Liyana, Kamaruzaman (2018) Effects of Zn and A1 on corrosion characteristics of Sn-1.0Ag-0.5Cu alloys / Nurul Liyana Kamaruzaman. Masters thesis, University of Malaya.

Nurul Mujahidah , Ahmad Khairuddin (2019) Immobilization of bovine serum albumin on chitosan/PVA film: Physical and mechanical properties investigation / Nurul Mujahidah Ahmad Khairuddin. Masters thesis, University of Malaya.

Nuurul Syahierah, Othman (2018) Theoretical analysis of effective conductivity of metal foams with thermal interface material / Nuurul Syahierah Othman. Masters thesis, University Malaya.

Odeta , Prosper (2013) Reduction of CO[2] emission in Malaysia transport industry using compressed natural gas as alternative fuel / Odeta Prosper. Masters thesis, University of Malaya.

Omar Fayez Almatar , Abd Rabbuh (2019) Synthesis of nanofluid, heat transfer and friction loss of nanofluid in different shaped heat exchanger tubes / Omar Fayez Almatar Abd Rabbuh. Masters thesis, Universiti Malaya.

Omar Saifuddin , Aasimudin (2021) Optimized biodiesel production by using ultrasound assisted transesterification / Omar Saifuddin Aasimudin. Masters thesis, Universiti Malaya.

Omid, Kahbasi (2013) Swelling of elastomers due to simulataneous diffusion of biodiesel and multi-axial large strain / Omid Kahbasi. Masters thesis, University of Malaya.

Ong, Hwai Chyuan (2012) Techno-economic analysis of biodiesel production from palm, Jatropha curcas and Calophyllum inophyllum for road transport in Malaysia / Ong Hwai Chyuan. PhD thesis, University of Malaya.

Pan, Kok Chen (2012) The design and testing of a power augmented wind turbine system for urban high rise application / Pan Kok Chen. Masters thesis, Universiti Malaya.

Phan, Choon Kit (2018) Enhancement of the design of air-conditioning heat exchangers circuits / Phan Choon Kit. Masters thesis, University of Malaya.

Phoo, Yoong Hau (2019) Preventing delayed cracks in deep drawing processes of SUS304 cylindrical cups using a coated die / Phoo Yoong Hau. Masters thesis, University of Malaya.

Poh, Kai Sin (2017) A comprehensive performance investigation of an under-floor air distribution system in the tropics / Poh Kai Sin. Masters thesis, University of Malaya.

Poon, Hiew Mun (2019) Development and validation of a compact biodiesel surrogate fuel model for multi-dimensional cfd applications / Poon Hiew Mun. Masters thesis, University Malaya.

Premdass, Deva Ray (2018) Study the corrosion behaviour of aluminium alloy 5052 in Croton Megalocarplus and Coconut Biodiesel / Premdass Deva Ray. Masters thesis, University of Malaya.

Puravi, Saminathan (2021) Study of heat transfer and friction loss analysis of flowing fluid in different configuration of closed conduit flow / Puravi Saminathan. Masters thesis, Universiti Malaya.

Qamar Fairuz , Zahmani (2018) Validation of thermal enhancement in micro channel heat using numerical analysis / Qamar Fairuz Zahmani. Masters thesis, University of Malaya.

Qin , Mingyuan (2024) Performance evaluation and prediction analysis of a novel catalytic combustion heating technology in an open cold emergency environment / Qin Mingyuan. PhD thesis, Universiti Malaya.

Rad, Sadri (2013) Study on thermophysical properties of fluids containing carbon nanotubes / Rad Sadri. Masters thesis, University of Malaya.

Rad, Sadri (2018) Synthesis of nanofluids containing eco-friendly functionalized carbon nanomaterials for improving heat dissipation / Rad Sadri. PhD thesis, Universiti Malaya.

Rahmah , Abdulsalam Attallah (2017) Improvement of electrical and electronic equipment waste collection model for Malaysian recycling industry / Rahmah Abdulsalam Attallah. Masters thesis, University of Malaya.

Raihana, Mohamad Fawzi (2012) Constitutive modeling of the stress-softening in swollen polychloroprene rubber under cyclic loading / Raihana Mohamad Fawzi. Masters thesis, Universiti Malaya.

Raja Nurul Hani, Raja Azhar (2017) Corrosion characteristics of aluminium alloys in calophyllum inophyllum biodiesel / Raja Nurul Hani Raja Azhar. Masters thesis, University of Malaya.

Rakesh, Kamalakannan (2019) Heat exchange simulation of mobile bottle chiller / Rakesh Kamalakannan. Masters thesis, University of Malaya.

Ramin, Solouki Bonab (2013) Characterization of oil palm empty fruit fiber reinforced PVA / Ramin Solouki Bonab. Masters thesis, Universiti Malaya.

Ramizah , Rozaimay (2024) Compressive strength and microstructural characterization of porous nickel brazed to copper and stainless steel / Ramizah Rozaimay. Masters thesis, Universiti Malaya.

Rehan , Zahid (2017) Tribological analysis of diamond-like carbon coatings in combination with bio-lubricants for engine cam tappet interaction / Rehan Zahid. PhD thesis, University of Malaya.

Rodianah , Alias (2019) Biocompatible and antibacterial silver tantalum oxide thin film by magnetron sputtering for surgical applications / Rodianah Alias. PhD thesis, Universiti Malaya.

Rosmawati, Mat Jihin (2013) Numerical study of heat transfer performance of suspension of nanofluids in heat exchanger tube / Rosmawati Mat Jihin. Masters thesis, University of Malaya.

Rubentheren, Viyapuri (2013) Structural dynamic characterization of biobased micro aerial vehicles / Rubentheren Viyapuri. Masters thesis, University of Malaya.

S Dalilla, Abd Rahim (2013) Techno-economic analysis of jatropha curcas biodiesel production in Malaysia / S Dalilla Abd Rahim. Masters thesis, University of Malaya.

Sa'adah, Ahmad @ Ahmad Sowi (2013) Role of thermo-physical properties of refrigerant on the thermal performance of a refrigeration system / Sa'adah Ahmad @ Ahmad Sowi. Masters thesis, University of Malaya.

Sado , Fatai (2019) An active lower-extremity exoskeleton for synchronous mobility assistance in lifting and carrying manual handling task / Sado Fatai. PhD thesis, Universiti Malaya.

Saif , Zeyad Mustafa (2011) Numerical study of helical savonius rotor in urban areas / Saif Zeyad Mustafa. Masters thesis, University of Malaya.

Sajjad, Zargham (2012) Structural dynamic modification of vibrating structures using topology optimization / Sajjad Zargham. Masters thesis, University of Malaya.

Saktishvikmend, Anbalagan (2019) Design of flapping mechanism and analysis on the lift force of the wings / Saktishvikmend Anbalagan. Masters thesis, University of Malaya.

Saktiyaramana, Karpayah (2018) The optical properties of alumina and tirania naofluids / Saktiyaramana Karpayah. Masters thesis, University Of Malaya.

Salem Omar Abdullah, Dhuban (2019) Microwave and conventional sintering of manganese-doped alumina: Densification and mechanical Properties / Salem Dhuban. Masters thesis, Universiti Malaya.

Salman Ahamed Khan , Jagirdar (2013) Convective heat transfer in square and cylindrical porous annulus / Salman Ahamed Khan Jagirdar. PhD thesis, University of Malaya.

Saman , Paria (2016) Development of nanofluid based horizontal heat storage unit / Saman Paria. PhD thesis, University of Malaya.

Samira , Gharehkhani (2016) Heat transfer and friction loss analysis of non-wood fiber suspensions in closed conduit flow / Samira Gharehkhani. PhD thesis, University of Malaya.

Sandru , Ramadas (2020) Study of heat transfer and friction loss of nanofluid suspension flow in circular pipe heat exchanger / Sandru Ramadas. Masters thesis, University of Malaya.

Sara , Pourshahrestani (2017) Development of gallium-doped mesoporous bioactive glass as hemostatic agent / Sara Pourshahrestani. PhD thesis, University of Malaya.

Sara Lee , Kit Yee (2019) Effect of microwave sintering on the densification and properties of copper oxide doped Y-TZP ceramics / Sara Lee Kit Yee. PhD thesis, Universiti Malaya.

Sarmad Khubaib, Sarajun Hoda (2021) Creep damage analysis and numerical simulation on oil well steel pipe casing at elevated temperatures / Sarmad Khubaib Sarajun Hoda. Masters thesis, Universiti Malaya.

Sarveswaran, Subramaniam (2018) Computational study of air ventilation in high tension electrical cable tunnel / Sarveswaran Subramaniam. Masters thesis, University of Malaya.

Satheeskumar , Rajadran (2017) To study the chiller plant room performance /Satheeskumar Rajadran. Masters thesis, University of Malaya.

Sayed Mojtaba, Tabibian (2017) Computational fluid dynamics simulation of exhaust ventilation and jet fan systems during a fire event in velodrome / Sayed Mojtaba Tabibian. Masters thesis, University of Malaya.

Sazzad , Sharif (2016) Retardation of corrosion and tribological degradation of automotive materials in palm biodiesel / Sazzad Sharif. PhD thesis, University of Malaya.

Seow , Khai Tze (2018) The performance of evacuated tube solar collector (ETSC) using ceo / water nanofluid / Seow Khai Tze. Masters thesis, University Of Malaya.

Seri' Aisyah , Hassim (2019) Pattern recognition of lettuce varieties with machine learning / Seri' Aisyah Hassim. Masters thesis, University Malaya.

Seyed Mohsen , Mousavi (2018) Solving the integrated inventory supply chain problems using meta-heuristic methods / Seyed Mohsen Mousavi. PhD thesis, University of Malaya.

Seyed Reza, Besharati (2015) Design and manufacturing of a new CNC gantry machine with double motion feed drive system / Seyed Reza Besharati. PhD thesis, University of Malaya.

Seyed Shirazi, Seyed Farid (2015) Development of calcium silicate-based composites for load-bearing implants / Seyed Farid Seyed Shirazi. PhD thesis, University of Malaya.

Seyedeh Maryam , Hosseini (2017) Synthesis of nanofluid to improve heat transfer in annular concenteric heat exchanger / Seyedeh Maryam Hosseini. Masters thesis, University of Malaya.

Shady Fouad , Ahmed Saber (2024) Hydrothermal synthesis of hierarchical NiO nanoparticles loaded SnO2 for acetone gas sensing / Shady Fouad Ahmed Saber. Masters thesis, Universiti Malaya.

Shafini, Mohd Shafie (2015) An integrated approach for techno-economic and environmental analysis of power generation from paddy residue in Malaysia / Shafini Mohd Shafie. PhD thesis, University of Malaya.

Shahrul Azhar, Mustaffa (2021) Compliance on safety behaviour among the lift maintenance worker / Shahrul Azhar Mustaffa. Masters thesis, Universiti Malaya.

Shaikat, Debnath (2015) A density functional study on structural, electronic, chemical and optical properties of Ag-X, Al-X and Cu-X [X=Li, Na, K] nano-alloys for OPTO-electronic and catalytic applications / Shaikat Debnath. Masters thesis, University of Malaya.

Shalini Devi, Ramaiya (2018) Corrosion characterization of optimized Zr02-Sio2 mixed nanotubes coated on aluminium alloy AA3003 / Shalini Devi Ramaiya. Masters thesis, University of Malaya.

Shamini, P. Janasekaran (2017) Welding of T-joint configuration between dissimilar metals using low powered fiber laser / Shamini P. Janasekaran. PhD thesis, University of Malaya.

Sharifah Fatmadiana , Wan Muhamad Hatta (2013) Probing technique for energy distribution of positive charges in gate dielectrics and its application to lifetime prediction / Sharifah Fatmadiana Wan Muhamad Hatta. PhD thesis, University of Malaya.

Sharon Teh , Ai Ping (2022) Tetrahedral meshing by finite element analysis for surface cracks with respect to corner point singularities for smooth and stepped round bars / Sharon Teh Ai Ping. PhD thesis, Universiti Malaya.

Sheralia Ufairah, Abdullah (2019) Prediction of local buckling behavior of reeled pipeline with probabilistic approach using finite element analysis / Sheralia Ufairah Abdullah. Masters thesis, University of Malaya.

Shihao , Sun (2022) Finite element modelling of wire-arc-additive-manufacturing process (WAAM) / Shihao Sun. Masters thesis, Universiti Malaya.

Shiu , Kai Ping (2017) Study of copper-aluminium high temperature die-attach material with different aluminium weight percentage /Shiu Kai Ping. Masters thesis, University of Malaya.

Shoaib, Sadik (2020) Study of heat and momentum transfer to colloidal suspensions in annular closed conduit flow / Shoaib Sadik. Masters thesis, Universiti Malaya.

Siah, Meng Zhe (2019) Development of aluminium-copper die-attach alloy for high operational temperature application / Siah Meng Zhe. Masters thesis, University Malaya.

Sisavanh, Suyavong (2013) Redesign of stone crushing plant system in Atlantic sand and gravel company / Sisavanh Suyavong. Masters thesis, University of Malaya.

Siti Nor'Ain, Mokhtar (2021) Experimental analysis of indoor air quality for human comfort in vehicle cabin / Siti Nor' Ain Mokhtar. Masters thesis, Universiti Malaya.

Siti Rusyida , Rohim (2017) The relationship between neck muscle strength and duration of computer work among women employees / Siti Rusyida Rohim. Masters thesis, University of Malaya.

Siti Sarah, Ramani @ Abdullah (2021) Numerical study on the performance and flow characteristic of wind using invelox system / Siti Sarah Ramani @ Abdullah. Masters thesis, Universiti Malaya.

Siti Shafiah , Shazali (2019) Green approach to functionalize highly stable graphene nanoplatelet colloid for heat-based applications / Siti Shafiah Shazali. PhD thesis, Universiti Malaya.

Sivabalan , Tanapala (2013) The thermal performance study of biomass field-erected water tube boilers using analytical model / Sivabalan Tanapala. Masters thesis, Universiti Malaya.

Sivanesh Kumar , Selearajen (2019) Heat transfer and pressure loss analysis of a novel colloidal suspension in turbulent flow conduits / Sivanesh Kumar Selearajen. Masters thesis, Universiti Malaya.

Soong, Ming Foong (2015) Application of inerter in passenger vehicle suspension systems / Soong Ming Foong. Masters thesis, University of Malaya.

Soudeh , Iranmanesh (2019) Enhancement of the thermal performance of an evacuated tube solar collector using nanofluids with grapheme nanoplatelets / Soudeh Iranmanesh. PhD thesis, Universiti Malaya.

Sree Rama Dasson, Velayudlan (2012) Nanofluid application in electric motor cooling / Sree Rama Dasson Velayudlan. Masters thesis, University of Malaya.

Sri Ganesh , Elangkovan (2019) Study of mitigation of superheater tube failure & maintenance of an industrial boiler / Sri Ganesh Elangkovan. Masters thesis, Univesiti Malaya.

Subashini, Supramaniam (2013) Synthesis and characterization of manganese (IV) oxide nanowire via hydrothermal method / Subashini Supramaniam. Masters thesis, University of Malaya.

Suga Ganeshan, Kalaichalvan (2021) Synthesis and evaluation of properties and energy transportation characteristics of gum Arabic and gum guar in heat exchanger / Suga Ganeshan Kalaichalvan. Masters thesis, Universiti Malaya.

Sulaiman, Ruhaizin (2015) Kitchen gas stove table top height from ergonomic perspective for elderly in Malaysia / Ruhaizin Sulaiman. PhD thesis, University of Malaya.

Suman , Selvarajoo (2024) An assessment model to evaluate the level of collaborative manufacturing practices for tool and die development in Malaysia / Suman Selvarajoo. PhD thesis, Universiti Malaya.

Sunday, Albert Lawal (2013) Effect of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools / Sunday Albert Lawal. PhD thesis, University of Malaya.

Sunita, Harun (2017) Development of cutting tool through superplastic boronizing of duplex stainless steel /Sunita Harun. Masters thesis, University of Malaya.

Sunusi Marwana , Manladan (2017) Microstructural evolution and mechanical properties of magnesium alloy/austenitic stainless steel joints produced by resistance spot welding techniques / Sunusi Marwana Manladan. PhD thesis, University of Malaya.

Suriani , Ibrahim (2011) Synthesis and characterizations of novel solid polymer electrolytes with carbon nanotube as a filler / Suriani Ibrahim. Masters thesis, University of Malaya.

Surya , Dharma (2018) Engine performance, emission and corrosion of biodiesel−bioethanol−diesel blends from Jatropha curcas‒ceiba pentandra mixed oil / Surya Dharma. PhD thesis, University of Malaya.

Syazwan Hanani, Meriam Suhaimy (2012) Synthesis and characterization of amorphous carbon nanotubes/copper oxide hybrid materials / Syazwan Hanani Meriam Suhaimy. Masters thesis, University of Malaya..

Syed Mohd Syafiq, Syed Mahmud (2022) Development of sensor-based machinery vibration assessment system for effective faults diagnostic in condition based maintenance using machine learning / Syed Mohd Syafiq Syed Mahmud. Masters thesis, Universiti Malaya.

Syed Muzamil, Ahmed (2017) Heat transfer and frictional pressure drop of crop fiber suspensions in closed conduit flow and nanofluid flow in backward-facing step / Syed Muzamil Ahmed. Masters thesis, University of Malaya.

Syeda, Reham Shahed (2017) Oxidation and thermal stability enhancement of emulsified palm oil methyl ester in diesel engine / Syeda Reham Shahed. Masters thesis, University of Malaya.

Tahsin Ahmed , Mozaffor Onik (2022) Formation and characterization of rare earth oxides as high-K gate dielectrics on germanium substrate / Tahsin Ahmed Mozaffor Onik. PhD thesis, Universiti Malaya.

Tam, Jun Hao (2018) A comparison study for active chilled beam and variable air volume systems for an office building / Tam Jun Hao. Masters thesis, University of Malaya.

Tan, Ai Ting (2017) Ultrasonic assisted reflow soldering of lead free solder joint / Tan Ai Ting. PhD thesis, University of Malaya.

Tan, Kian Hwa (2021) Potential saving and return of investment of solar panel system installation for residential in Malaysia / Tan Kian Hwa. Masters thesis, University of Malaya.

Tan, Kim Han (2012) Synthesis and characterizations of amorphous carbon nanotubes/cadmium selenide quantum dots hybrid materials / Tan Kim Han. Masters thesis, University of Malaya.

Tan , Chin Joo (2020) Fabrication and characterisation of highly aligned fibrous assemblies / Tan Chin Joo. PhD thesis, Universiti Malaya.

Tatagar Mohammad Yunus, Khan (2017) Effects of injection parameters on performance of diesel engine run on biodiesel from direct transesterification / Tatagar Mohammad Yunus Khan. PhD thesis, University of Malaya.

Tawfik Hamood , Qaid (2019) Properties of eggshell-derived hydroxyapatite coatings on titanium produced by micro-arc oxidation method / Tawfik Hamood Qaid. Masters thesis, Universiti Malaya.

Tee , Wu Yang (2020) Effect of different types of static mixer geometry on quality of microbubble generation / Tee Wu Yang. Masters thesis, Universiti Malaya.

Teh, Seoh Hian (2013) Synthesis and characterization of electrodeposited nanocrystalline ferromagnetic cobalt-iron-platinum alloy films / Teh Seoh Hian. PhD thesis, University of Malaya.

Teh, Yee Ching (2017) The effects of various processing conditions on the properties of hydroxyapatite / Teh Yee Ching. PhD thesis, University of Malaya.

Teng , Kah Hou (2018) Fouling and its mitigation on heat exchanger surfaces by additives and catalytic materials / Teng Kah Hou. PhD thesis, University of Malaya.

Tham, Chi Meng (2011) Effect of nanofluid-based absorbers on direct solar collector / Tham Chi Meng. Masters thesis, University of Malaya.

Thenarasu, Pakiyanathan (2021) Heat transfer to nanofluids in closed conduits flow / Thenarasu Pakiyanathan. Masters thesis, Universiti Malaya.

Thineskumar, Ramalingam (2022) Heat transfer to two phase flow and fouling mitigation by synthetic fibre additives / Thineskumar Ramalingam. Masters thesis, Universiti Malaya.

Ubenthiran, Sutharsini (2015) The effect of sintering parameters on the mechanical properties and hydrothermal ageing resistance of Y-TZP Ceramic / Sutharsini Ubenthiran. PhD thesis, University of Malaya.

Umi Zalilah, Mohamad Zaidi (2019) Surface modification of Ti-allloy with silver silicon nitride coating for antibacterial applications / Umi Zalilah Mohamad Zaidi. Masters thesis, University of Malaya.

Vanessa, Lusus (2020) Schottky and Poole-Frenkel conduction mechanisms in ZrON/SiC system / Vanessa Lusus. Masters thesis, University of Malaya.

Venuthan , Surendaran (2020) Kinetic study of in-pipe water flow for power generation / Venuthan Surendaran. Masters thesis, University of Malaya.

Vicneswaran, Arumugam (2013) Synthesis and characterization of manganese (IV) oxide - multiwalled carbon nano tubes (MWCNT) composite via solid-state technique / Vicneswaran Arumugam. Masters thesis, University of Malaya.

Viknesvaran, Silverrajan (2020) CFD modelling of multiphase flow in static mixer / Viknesvaran Silverrajan. Masters thesis, University of Malaya.

Vikneswaran, Padasivam (2017) Corrosion effect of ceiba pentandra blends with commercial diesel on aluminium alloys / Vikneswaran Padasivam. Masters thesis, University of Malaya.

Vikram, Nanthanar (2019) Study of puncher materials for singulation process in semiconductor manufacturing industry / Vikram Nanthanar. Masters thesis, University of Malaya.

Vinod Khanna Nair, Kuncheekanna (2013) A comparison of occupant thermal comfort between a green building and a conventional building in the Tropics / Vinod Khanna Nair Kuncheekanna. Masters thesis, University of Malaya.

Wail Sami, Wadee Sarsam (2017) Thermal performance of a flat-plate solar collector using aqueous colloidal dispersions of carbon-based nanostructures / Wail Sami Wadee Sarsam. PhD thesis, University of Malaya.

Waleed , Alghani (2020) Preparation characterization and tribological behavior of lube oil with nanoparticles additives / Waleed Alghani. PhD thesis, Universiti Malaya.

Wan Khairul Muzammil, Abdul Rahim (2018) Design and testing of a deflector integrated cross axis wind turbine / Wan Khairul Muzammil Abdul Rahim. PhD thesis, University of Malaya.

Wan Khairul Muzammil, Abdul Rahim (2012) Numerical analysis of phase change material for energy storage system / Wan Khairul Muzammil Abdul Rahim. Masters thesis, University of Malaya.

Wan Mohd Faizal , Wan Abd Rahim (2022) Computational fluid dynamics (CFD) analysis of human upper airway in sleep apnea patients under various breathing conditions / Wan Mohd Faizal Wan Abd Rahim. PhD thesis, Universiti Malaya.

Wan Nur Atikah, Haji Wan Nafi (2017) Corrosion behaviour of poly-l-lactic acid coated magnesium by electrospinning / Wan Nur Atikah Haji Wan Nafi. Masters thesis, University of Malaya.

Wan Safiyyah Nurnajah, Wan Ahmad Tajuddin (2019) Investigation of trapezius muscle effect using ogawa masterdrive massage chair with electromyogram (EMG) sensor / Wan Safiyyah Nurnajah Wan Ahmad Tajuddin. Masters thesis, University of Malaya.

Wang, Lesu (2019) Design optimization of speed increaser installed on wind power generator / Wang Lesu. Masters thesis, University of Malaya.

Wang, Yanru (2018) A comparative study of vibrational response based impact force localization and quantification using different types of neural networks / Wang Yanru. Masters thesis, University of Malaya.

Wang, Yazhuang (2021) Modeling of generative design for wire arc additive manufacyuring (WAAM) / Wang Yazhuang. Masters thesis, Universiti Malaya.

Wong, Dannee (2018) Experimental investigation and constitutive modeling of randomly oriented electrospun nanofibrous membranes / Wong Dannee. PhD thesis, University of Malaya.

Wong, Kok Hoe (2013) The design and flow simulation of a power-augmented shroud for urban wind turbine system / Wong Kok Hoe. Masters thesis, University of Malaya.

Wong , Chun Mun (2024) Impact of bin weather data and climate change on air conditioning in the tropics / Wong Chun Mun. PhD thesis, Universiti Malaya.

Wong , Kok Hoe (2019) Design, simulation and testing of an omni direction deflector for vertical axis wind turbine / Wong Kok Hoe. PhD thesis, University of Malaya.

Wong , Tee Hao (2024) Sound quality classification of wood used for Sarawak traditional musical instrument- Sape / Wong Tee Hao. PhD thesis, Universiti Malaya.

Wu , Bo (2024) Fabrication of metal matrix nanocomposite surface on WE43 using friction stir processing for biomedical implant application / Wu Bo. PhD thesis, Universiti Malaya.

Yap, Yi Ren (2019) Wood defect detection and classification using deep learning / Yap Yi Ren. Masters thesis, University Malaya.

Yap , Park Wah (2022) Project management case study - development of iron ore processing plant / Yap Park Wah. Masters thesis, Universiti Malaya.

Yeo, Jue Chuan (2018) Hybrid renewable energy: Mobile micro hydro turbine / Yeo Jue Chuan. Masters thesis, University of Malaya.

Yeo, Wei Hong (2017) Prediction of oxide scale growth and thermo-mechanical stress-strain of austenitic steel and nickel-based alloy tubes in ultra-supercritical power plant / Yeo Wei Hong. PhD thesis, University of Malaya.

Yeoh, Ru Sern (2019) Design and development of an online robot programming framework with robot operating system (ROS) / Yeoh Ru Sern. Masters thesis, University of Malaya.

Yii, Shie Chuong (2007) Modelling and simulation of full car passive suspension systems / Yii Shie Chuong. Undergraduates thesis, University of Malaya.

Yit, Jing Ee (2023) Formulation of final resistance of the air filters / Yit Jing Ee. PhD thesis, Universiti Malaya.

Yong, Siu Fung (2011) Superplastic boronizing on duplex stainless steel (DSS) using compression method / Yong Siu Fung. Masters thesis, Universiti Malaya.

Yong , Kok Wee (2020) A computational study of water mobility on smooth surface, cavities and porous structure with hydrophilic and hydrophobic coatings / Yong Kok Wee. PhD thesis, Universiti Malaya.

Zainab , Shakir Radeef (2018) Design of a piezoelectric generator for vibration energy harvesting using non ferroelectric PZnT-NT / Zainab Shakir Radeef. PhD thesis, University of Malaya.

Zhang, Zimu (2021) Blood cells classification using embedded machine learning / Zhang Zimu. Masters thesis, Universiti Malaya.

Zhou, Ding (2017) Stress intensity factors for embedded cracks within torsionally loaded square prismatic bars / Zhou Ding. Masters thesis, University of Malaya.

Zhou , Ding (2024) Microstructural characteristics and mechanical performance of Bi-Sb-Ni added Sn 3.0Ag-0.5Cu multicomponent lead-free solder alloy / Zhou Ding. PhD thesis, Universiti Malaya.

Zulfadzli , Ridzuan (2019) Measurement of liquid film thickness in high energy gas-liquid two-phase flow / Zulfadzli Ridzuan. Masters thesis, University Malaya.

Zulkarnain, Endut (2013) Synthesis and characterization of anodic titania nanotubes for supercapacitor application / Zulkarnain Endut. PhD thesis, University of Malaya.