Items where Subject is "T Technology > T Technology (General)"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: | - | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items at this level: 866.

Hartini , Hazmi (2014) Development of seating pressure ulcer prevention training system for individual with spinal cord injury / Hartini Hazmi. Masters thesis, University of Malaya.

Ho , Fu Haw (2017) Development of a material efficiency strategy selection model for electrical and electronic manufacturing industry / Ho Fu Haw. PhD thesis, University of Malaya.

Iman , Behroyan (2013) Turbulent forced convection of nanofluid in a heated tube: A Computational Fluid Dynamics (CFD) study / Iman Behroyan. Masters thesis, University of Malaya.

-

-, Hadi (2016) Fatty acid based phase change materials for thermal storage applications / Hadi. PhD thesis, University of Malaya.

A

A.B.M. Saiful, Islam (2013) Nonlinear dynamic behaviour of fully coupled Spar platform /A.B.M. Saiful Islam. PhD thesis, University of Malaya.

Aainaa Aqilah, Baharuddin (2017) Self-assembly of synthesized 4-pentynoic acid functionalized magnetite-maghemite nanoparticles on silicon dioxide/n-type silicon substrate / Aainaa Aqilah Baharuddin. Masters thesis, University of Malaya.

Abbod Ali, Mohammed Saeed (2015) Scouring effect of river bed from the flow over pipe using CFD / Abbod Ali Mohammed Saeed. Masters thesis, University of Malaya.

Abd. Khahar, Saprani (2012) Pengajaran komponen teknologi maklumat dan komunikasi dalam kursus perguruan lepasan ijazah / Abd. Khahar Bin Saprani. PhD thesis, University of Malaya.

Abdallah, Muhamed Bashir (2017) Ergonomic space design in enhancing perceived work performance in green office building / Abdallah Muhamed Bashir. Masters thesis, University of Malaya.

Abdallah Ibrahim, Mohammed Hasaballa (2013) Finite element analysis of left ventricle motion and mechanical properties in three dimensions / Abdallah Ibrahim Mohammed Hasaballa. Masters thesis, University of Malaya.

Abdirahman, Hadi Omar (2018) Positional parameters of EMGfor upper limb amputations / Abdirahman Hadi Omar. Masters thesis, Universiti Malaya.

Abdolhossein, Khalilnejad (2013) Numerical simulation and experimental study of root anchorage /Abdolhossein Khalilnejad. PhD thesis, University of Malaya.

Abdul Halim, Ahmad (2014) Tribological performance of palmitic acid as lubricant additives for rotary compressor / Abdul Halim Ahmad. Masters thesis, University of Malaya.

Abdul Halim, Poh Yuen Wu (2013) Development of field deployable fiber bragg grating interrogator / Abdul Halim Poh Yuen Wu. Masters thesis, University of Malaya.

Abdul Karim, Mustafa S. (2015) A study on data embedding in Universal Domain / Mustafa S. Abdul Karim. PhD thesis, University of Malaya.

Abdul Rauf, Abu Bakar (2017) Cortical auditory evoked potential assessment on passive speech perception using contrast of voicing and articulation placing among subjects with sensorineural hearing loss / Abdul Rauf Abu Bakar. Masters thesis, University of Malaya.

Abdul Razak, Faridah (2016) Multiwalled carbon nanotubes and their composites as alcohol sensors and field electron emission cathodes / Faridah Binti Abdul Razak. PhD thesis, University of Malaya.

Abdullah, Ahmad Fazlizan (2016) Design and testing of a novel exhaust air energy recovery wind turbine generator / Ahmad Fazlizan Bin Abdullah. PhD thesis, University of Malaya.

Abdullah, Al-Mamoon (2017) Study on the thermal performance of a multi-layer structural green roof panel / Abdullah-Al-Mamoon. Masters thesis, University of Malaya.

Abid, Shahbaz Akhtar (2014) An application of 3D logical structure in a DHT paradigm for efficient communication in MANETs / Shahbaz Akhtar Abid. PhD thesis, University of Malaya.

Abolghasem, Akbari (2011) Flood modeling using GIS-based watershed hydrological model and remotely sensed data / Abolghasem Akbari. PhD thesis, University of Malaya.

Abu Bakar, Azrena (2005) Microwave sintering of a tin base alloy / Azrena binti Hj. Abu Bakar. Masters thesis, Universiti Malaya.

Abu Hanipah, Ramli (2014) Relationships between safety climate factors and occupational safety and health level of awareness in Malaysia Government Agencies / Abu Hanipah Ramli. PhD thesis, University of Malaya.

Abu Hasnat Mohammad , Ashfak Habib (2018) Development of a new ictal EEG source imaging technique using recursive approach for presurgical evaluation of focal epilepsy / Abu Hasnat Mohammad Ashfak Habib. PhD thesis, University of Malaya.

Abu Mohammed, Sifullah (2017) Studying the fusion cutting mechanism in CO2 laser blanking of stainless steel-304 square samples / Abu Mohammed Sifullah. Masters thesis, University of Malaya.

Adeeb Hayyan, Alrazzouk (2015) Acids and deep eutectic solvents as novel catalysts for the processing of low grade palm oil for biofuel production /Adeeb Hayyan Alrazzouk. PhD thesis, University of Malaya.

Adel Moh'd Fawzi, A. R. Alhalawani (2014) A novel glass polyalkenoate cement for fixation purposes in the skeleton / Adel Moh'd Fawzi A. R. Alhalawani. Masters thesis, Universiti of Malaya.

Ademola, Sanni Shamsudeen (2014) Adoption of e-publishing amongst Malaysian journal publishers / Sanni Shamsudeen Ademola. PhD thesis, University of Malaya.

Adi Irfan, Che Ani (2007) Model keberkesanan pengurusan fasiliti perumahan bertingkat bukan kos rendah di Malaysia / Adi Irfan Che Ani. PhD thesis, University of Malaya.

Adi Izhar, Che Ani (2012) Detection of teeth surface defects using fiber optic displacement sensor / Adi Izhar Che Ani. Masters thesis, University of Malaya.

Adila, Md Hashim (2013) Integrating user requirements and ergonomics in designing a school workshop workstation / Adila Md Hashim. Masters thesis, University of Malaya.

Adira, Ibrahim (2013) Gender identification of children using hidden Markov model based on Mel-frequency cepstral coefficient / Adira Ibrahim. Masters thesis, University of Malaya.

Adnan, Roseli (2012) Water injection system for power augmentation and emission control for hydrogen-fuelled compression ignition engine / Adnan Roseli. PhD thesis, University of Malaya.

Adzlan Muhaymin, Idris (2018) Tunable Q-switched laser using rose gold-based saturable absorber / Adzlan Muhaymin Idris. Masters thesis, University of Malaya.

Afia, Sharmin (2016) Engineering properties of ternary blended geopolymer concrete and role of oxide composition on mortar / Afia Sharmin. Masters thesis, University of Malaya.

Afshan, Kordi (2012) Comparative study on Malay children vowel recognition using multi-layer perceptron and recurrent neural networks / Afshan Kordi. Masters thesis, University of Malaya.

Afshin, Mazandarany (2012) Electricity generation and consumption in Iran and the role of nuclear power for sustainable energy / Afshin Mazandarany. PhD thesis, University of Malaya.

Ag Mohd Fathi Fawwaz, Ag Mohd Tahir (2018) Application of fuzzy logic for diabetes monitoring / Ag Mohd Fathi Fawwaz Ag Mohd Tahir. Masters thesis, University Malaya.

Ahasanul, Haque (2016) Circular edge bow-tie nano antenna for energy harvesting systems / Ahasanul Haque. Masters thesis, University of Malaya.

Ahmad Aiman Ezreen, Abu Bakar (2018) Feasibility studies for offshore application of cross axis wind turbine / Ahmad Aiman Ezreen Abu Bakar. Masters thesis, University of Malaya.

Ahmad Azim , Shukri (2015) Mechanics based approach for ductility of reinforced concrete beams under cyclic loading / Ahmad Azim Shukri. Masters thesis, University of Malaya.

Ahmad Faizal, Ismail @ Z.Abidin (2003) Lawatan Maya di FSKTM secara Online (V-TOUR) / Ahmad Faizal Ismail @ Z.Abidin. Undergraduates thesis, University of Malaya.

Ahmad Fazlizan, Abdullah (2012) The design and testing of an exhaust air energy recovery wind turbine generator / Ahmad Fazlizan Abdullah. Masters thesis, University of Malaya.

Ahmad Kazwini, Abd Wahab (2011) Application of solar energy in Malaysia / Ahmad Kazwini Abd Wahab. Masters thesis, University of Malaya.

Ahmad Riyadh, Abu Bakar (2003) Automobile parts modification systems(ModifiCARtor) / Ahmad Riyadh Abu Bakar. Undergraduates thesis, University of Malaya.

Ahmed, Nawzat S. (2013) A fractal-based model to improve cooperation among physicians in distributed healthcare information systems / Nawzat S. Ahmed. PhD thesis, University of Malaya.

Ahmed , Abubakar (2017) Overcoming barriers to inclusive mobility: Experience of disabled people in Tertiary Institutions of Kano, Nigeria / Ahmed Abubakar. PhD thesis, University of Malaya.

Ahmed Hasan, Hamood al-Masoodi (2017) Q-switching and mode-locking pulse generation in Ytterbium-doped fiber lasers using nanomaterial saturable absorbers / Ahmed Hasan Hamood al-Masoodi. PhD thesis, University of Malaya.

Ainul Fatin, Muhammad Alimin (2018) Degradation analysis based on design considerations of advanced-process MOSFET / Ainul Fatin Muhammad Alimin. Masters thesis, University of Malaya.

Aisha, Muhammad (2018) Performance evaluation of a three-phase nine level voltage source converter using selective harmonic elimination technique / Aisha Muhammad. Masters thesis, University of Malaya.

Aisswarya, Kumaran (2016) Rough surface preparation through chemical etching for super-hydrophobicity / Aisswarya Kumaran. Masters thesis, University of Malaya.

Aizreena , Azaman (2012) Electromagnetic flux modelling of AC field over planar microarray dot electrodes used in rapid dielectrophoretic lab-on-chip device / Aizreena Azaman. Masters thesis, University of Malaya.

Aizzat Sazali, Yahaya Rashid (2014) Design modifications of dynamically loaded structures using structural optimization / Aizzat Sazali Yahaya Rashid. Masters thesis, University of Malaya.

Alaa Eldin Mohamed Elamin, Elnour Ahmed (2014) The Assessment of water quality modeling using GIS and Qual2K simulation analysis for the Klang River basin / Alaa Eldin Mohamed Elamin Elnour Ahmed. Masters thesis, University of Malaya.

Ali, Karimi (2016) Fabrication of nano composite hydrogels based on polyvinyl alcohol for biomedical applications / Ali Karimi. PhD thesis, University of Malaya.

Ali, Sadollah (2013) Development and applications of metaheuristic algorithms in engineering design and structural optimization / Ali Sadollah. PhD thesis, University of Malaya.

Ali, Shariati (2014) Behaviour of C-shaped angle shear connectors in high strength concrete / Ali Shariati. Masters thesis, University of Malaya.

Ali, Toghroli (2015) Applications of the ANFIS and LR models in the prediction of shear connection in composite beams / Ali Toghroli. Masters thesis, University of Malaya.

Ali Wadi Abbas, Al-Fatlawi (2015) Feasibility analysis on the potential of photovoltaic applications in Peninsular Malaysia / Ali Wadi Abbas Al-Fatlawi. PhD thesis, University of Malaya.

Alias, Ismail (2018) Experience, impact and needs related to urban heat island phenomenon in industrial areas /Alias Ismail. Masters thesis, University of Malaya.

Aliff Firdaus, Mat Yusoff (2018) Assessment of predominant noise sources and workers exposure in downstream oil and petrochemical industries in Malaysia / Aliff Firdaus Mat Yusoff. Masters thesis, University of Malaya.

Alireza, Jalali (2015) Computational modeling of cerebellar model articulation controller / Alireza Jalali. PhD thesis, University of Malaya.

Alireza, Shayesteh Fard (2016) A feedforward control for grid-connected inverter under unbalanced and distorted conditions / Alireza Shayesteh Fard. PhD thesis, University of Malaya.

Almashaqbeh, Sami Faris (2010) Biomechanics of staircase exercises / Almashaqbeh Sami Faris. Masters thesis, University of Malaya.

Almujtaba Osama, Ali Mohammed (2018) Modelling and simulation of thermoelectric air cooling / Almujtaba Osama Ali Mohammed. Masters thesis, University of Malaya.

Alshima Mohammed , Almlian (2018) International agreement in limiting the spread of nuclear weapons and its effect in the Middle East: Analysis from the Syariah Islamiyyah perspective / Alshima Mohammed Almlian. PhD thesis, University of Malaya.

Alzain, Mazen Abdullatif (2012) Bioethanol production from date fruit waste and its usage in petrol engine / Mazen Abdullatif Alzain. Masters thesis, University of Malaya.

Amaraja, Taur (2014) Dripping dynamics from a tilted nozzle / Amaraja Taur. Masters thesis, University of Malaya.

Ameer, Naeemi Zyarah (2017) Image restoration techniques for removal of blurred images / Ameer Naeemi Zyarah. Masters thesis, University of Malaya.

Amin, Kamyar (2013) Effect of nanofluids on heat transfer characteristics of a heat pipe / Amin Kamyar. Masters thesis, Universiti Malaya.

Amin, Kazemzadeh (2012) Structural analysis of power augmented guide vane for the vertical axis wind turbine / Amin Kazemzadeh. Masters thesis, University of Malaya.

Amini, Amineh (2014) An adaptive density-based method for clustering evolving data streams / Amineh Amini. PhD thesis, University of Malaya.

Amir Reza , Akhiani (2013) Product Benchmarking Using DFA and DFD Tools / Amir Reza Akhiani. Masters thesis, University of Malaya.

Amirhoushang, Zaferanlo (2018) Evaluation and optimization of efficiency of power plants / Amirhoushang Zaferanlo. Masters thesis, University of Malaya.

Amri , Mohd Yasin (2012) Development of automatic number plate recognition software and journey time measurement /Amri Mohd Yasin. Masters thesis, University of Malaya.

Andrea , Valerie Law (2018) Strategies for preventing fire in high-rise residential buildings /Andrea Valerie Law. Masters thesis, University of Malaya.

Ang, Bee Chin (2011) Synthesis and characterization of maghemite nanoparticles dispersed within silica matrix / Ang Bee Chin. PhD thesis, University of Malaya.

Angeline Teoh, Szu Fern (2012) VLSI floor planning optimization using genetic algorithm and cross entropy method / Angeline Teoh Szu Fern. Masters thesis, University of Malaya.

Anis Nurdhiani , Rosdi (2015) Preparation and characterization of proton exchange membrane (PEM) using polystyrene precursors / Anis Nurdhiani Rosdi. Masters thesis, University of Malaya.

Anisyahayati, Ismail (2005) Network scanner / Anisyahayati Ismail. Undergraduates thesis, University of Malaya.

Annas, Alamshah (2018) Design and performance evaluation of a double stator single rotor radial flux pm generator / Annas Alamshah. Masters thesis, University of Malaya.

Archina, Buthiyappan (2016) Ultraviolet assisted fenton oxidation hybrid process for treating recalcitrant textile wastewater / Archina Buthiyappan. PhD thesis, University of Malaya.

Arni Munira, Markom (2016) Erbium-zirconia-yttria-aluminum co-doped fiber for amplifier and nanomaterial based ultrafast laser applications / Arni Munira Markom. PhD thesis, University of Malaya.

Arnon, Lerdwongpaisan (2013) Automated tyre sorting system using mitsubishi FX3U PLC controller / Arnon Lerdwongpaisan. Masters thesis, University of Malaya.

Aruna, Mat Kesumin (2004) Reengineering of FSKTM (Financial System Module) / Aruna Mat Kesumin. Undergraduates thesis, University of Malaya.

Arunasalam, P. (1970) Keeping student records on a computer system / P. Arunasalam. Undergraduates thesis, University of Malaya.

Ashraful, Haque (2011) Development of high-temperature lead-free solder for semiconductor chip attachment / Ashraful Haque. Masters thesis, University of Malaya.

Asiah, Lokman (2016) Inline mach zender interferometer (IMZI) based sensors for humidity and biochemical concentration measurements / Asiah Lokman. PhD thesis, University of Malaya.

Asim Hassan, Ali (2013) Influence of crumb rubber modifier on performance characteristics of stone mastic asphalt /Asim Hassan Ali. Masters thesis, University of Malaya.

Asmi , Osman @ Ahmad (2002) Perpustakaan digital: Pembangunan sumber secara kolaboratif (Malaysian History Online (MHO) / Asmi Osman @ Ahmad. Undergraduates thesis, University of Malaya.

Asna, Mohd Zain (2013) Optimization of solidifications/stabilization for petroleum-based waste using blended cement / Asna Mohd Zain. PhD thesis, University of Malaya.

Atefeh, Amindoust (2013) Development of an integrated FIS-DEA method for sustainable supplier selection in manufacturing / Atefeh Amindoust. PhD thesis, University of Malaya.

Atikah, Aman (2017) Design and analysis of wudu' (ablution) workstation for elderly in Malaysia / Atikah Aman. Masters thesis, University of Malaya.

Avinash Pratap, Ramasamy (2002) Web-based counseling system / Avinash Pratap Ramasamy. Undergraduates thesis, University of Malaya.

Ayodele Olumide, Bolarinwa (2015) Synthesis, characterization and testing of zeolite and alumina supported organometallic (Ni, Pd, Pt and Mo) catalyst for the hydrodeoxgenation of oleic acid and stearic acid into N- and iso-paraffin biofuel / Ayodele Olumide Bolarinwa. PhD thesis, University of Malaya.

Azadeh, Ghadimi (2013) Stability and thermal conductivity of low concentration titania nanofluids / Azadeh Ghadimi. PhD thesis, University of Malaya.

Azadeh, Kheirandish (2016) Dynamic modelling of proton exchange membrane fuel cell system for electric bicycle / Azadeh Kheirandish. PhD thesis, University of Malaya.

Azida, Azmi (2012) Preparation and characterization of copper/copper-coated silicon carbide composites for electronic packaging / Azida Azmi. Masters thesis, University of Malaya.

Azim Ataollahi, Oshkour (2015) Utilization of functionally graded materials in femoral prosthesis / Azim Ataollahi Oshkour. PhD thesis, University of Malaya.

Azira , Khalil (2018) Development of a registration framework for echocardiography and computed tomography cardiovascular image fusion / Azira Khalil. PhD thesis, University of Malaya.

Azizul, Islam (2014) Engineering properties of POFA-GGBS-based fiber reinforced structural lightweight geopolymer concrete / Azizul Islam. Masters thesis, University of Malaya.

Azura, Shatar (2003) Scanning barcode 1d vs barcode 2d / Azura Shatar. Undergraduates thesis, University of Malaya.

B

Bahariah, Napiah (2003) Students advisee system (SAS) / Bahariah Napiah. Undergraduates thesis, University of Malaya.

Bakhtiar, Ali (2017) Effect of iron and bismuth addition on the microstructure and mechanical properties of sac105 solder under severe thermal environment / Bakhtiar Ali. Masters thesis, University of Malaya.

Bardia, Yousefi (2012) Automated detection of breast cancer in mammography images using Gabor filter and Bayesian classifier / Bardia Yousefi. Masters thesis, University of Malaya.

Bashar Mohammed, Shaher Yafouz (2016) Development of rapid label-free cells discriminator for dengue-infected hepatic cells utilizing dielectrophoresis / Bashar Mohammed Shaher Yafouz. PhD thesis, University of Malaya.

Basil Mathew , Panamkuttiyil (2011) Detection of micro emboli using signal energy and discrete fourier transform / Basil Mathew Panamkuttiyil. Masters thesis, University of Malaya.

Bassam Ahmed, Mohammed Al-Khelly (2017) Design and development of enhanced anti surge control by using smith predictor method / Bassam Ahmed Mohammed Al-Khelly. Masters thesis, University of Malaya.

Behroyan, Iman (2016) Computational modeling on convective flow of nanofluids through a heated pipe / Iman Behroyan. PhD thesis, University of Malaya.

Behzad, Rismanchi (2013) Energy management implementation in an office building via peak shaving method / Behzad Rismanchi. PhD thesis, University of Malaya.

Behzad, Shahizare (2017) Performance analysis of vertical axis wind turbine integrated with omni direction-guide-vane / Behzad Shahizare. PhD thesis, University of Malaya.

Belal Ahmed, Abdelaziz Elsayed (2013) Fuzzy sliding mode control for cart Inverted Pendulum system / Belal Ahmed Abdelaziz Elsayed. Masters thesis, University of Malaya.

Belal Gamal, Muthanna Alsubari (2015) Durability characteristics of self-consolidating high strength concrete containing ground palm oil fuel ash as a partial cement replacement / Belal Gamal Muthanna Alsubari. Masters thesis, University of Malaya.

Bilal Mouneir, Saeed Eid (2016) Microgrid multi-distributed energy resources for power management network stability / Bilal Mouneir Saeed Eid. PhD thesis, University of Malaya.

Bizhan, Rahmati (2016) Development of tantalum oxide (ta-o) thin film coating on biomedical ti-6al-4v alloy to enhance mechanical and tribological properties, and biocompatibility / Bizhan Rahmati. PhD thesis, University of Malaya.

Bodaghi, Nahid Bayat (2014) Sense of belonging among visually impaired students in a university library in Malaysia / Nahid Bayat Bodaghi. PhD thesis, University of Malaya.

C

Cao, Xiang (2016) An assessment of municipal solid waste management practices in Pulau Ketam Malaysia / Cao Xiang. Masters thesis, University of Malaya.

Ch'ng, Shiau Ying (2014) Coupling between diffusion of biodiesel and large deformation in elastomers: from experimental investigation to constitutive modeling / Ch'ng Shiau Ying. PhD thesis, University of Malaya.

Chai, Ai Bao (2013) Swelling of elastomers in biodiesel and the resulting mechanical response under cyclic loading / Chai Ai Bao. PhD thesis, University of Malaya.

Chai, Yoke Chin (2006) Engineering of osteogenic construct using rat bone marrow stromal-derived osteoblasts seeded on poly(caprolactone-trifumarate)scaffold / Chai Yoke Chin. Masters thesis, University of Malaya.

Chan, Bee Ting (2013) Fluid-structure simulation of a left ventricle with dilated cardiomyopathy / Chan Bee Ting. Masters thesis, University of Malaya.

Chan , Chong Wah (2002) Intelligent score agent web monitoring & retrieving system / Chan Chong Wah. Undergraduates thesis, University of Malaya.

Chan , Hung Yee (2003) Web-based smart diet system / Chan Hung Yee. Undergraduates thesis, University of Malaya.

Chandra, Bhusan Roy (2016) Investigation of tidal stream energy in the straits of Malacca / Chandra Bhushan Roy. Masters thesis, University of Malaya.

Chang, Kian Boon (2014) Development of a design rainfall model using ams and pds in Peninsular Malaysia / Chang Kian Boon. Masters thesis, University of Malaya.

Chang, Siow Wee (2013) The application of artificial intelligent techniques in oral cancer prognosis based on clinicopathologic and genomic markers / Chang Siow Wee. PhD thesis, University of Malaya.

Charlene Angela, J.N. Sundraraj (2018) Safety, health and environment hazard control in a Malaysian performing arts theatre production / Charlene Angele J.N. Sundraraj. Masters thesis, Universiti of Malaya.

Chen, Sin Yee (2015) Students' perception towards thermal sensation in libraries / Chen Sin Yee. Undergraduates thesis, University of Malaya.

Cheong, Kuen Leion (2003) The online mastermind game / Cheong Kuen Leion. Undergraduates thesis, University of Malaya.

Chew, Bee Teng (2012) Adaptive thermal comfort model study for public buildings in urban area / Chew Bee Teng. PhD thesis, University of Malaya.

Chew, Chee Sean (2011) Performance of Ni-W alloys as barrier film between lead free solder and copper substrate / Chew Chee Sean. Masters thesis, University of Malaya.

Chew, King Vee (2013) Comparison of corrosion of magnesium and aluminium in palm biodiesel / Chew King Vee. Masters thesis, Universiti Malaya.

Chew , Boon Piew (2002) Sistem maklumat penapis air / Chew Boon Piew. Undergraduates thesis, University of Malaya.

Chew , Chun Ming (2017) Evaluation, modelling and control of ultrafiltration membrane water treatment systems / Chew Chun Ming. PhD thesis, University of Malaya.

Chin, Chuan Kong (2012) Feasibility study on implementation of medium temperature solar thermal energy in industrial processes: a case study in Malaysia / Chin Chuan Kong. Masters thesis, University of Malaya.

Chin, Jun Hao (2018) Optimization of preliminary grounding system design for AC substation using modified evolutionary particle swarm optimization /Chin Jun Hao. Masters thesis, University of Malaya.

Chin, Wei Ken (2018) Computational study of vortex induced vibration performance with coupled bluff splitter body and elastic plate model / Chin Wei Ken. Masters thesis, University of Malaya.

Chin, Yi Ming (2018) Analysis of campus building energy optimization based on energy plus software simulation / Chi Yi Ming. Masters thesis, University of Malaya.

Choi, Jane Ru (2016) Development of paper-based biosensor for point-of-care- nucleic acid testing / Choi Jane Ru. PhD thesis, University of Malaya.

Chong , Fah Sam (2005) Personal computer checker/ Chong Fah Sam. Undergraduates thesis, University of Malaya.

Choo, Kai Wen (2017) Preparation and characterization of polyvinyl alcohol/chitosan composite films reinforced with cellulose nanofiber / Choo Kai Wen. Masters thesis, University of Malaya.

Chow, Ching Yan (2017) Sustainable extended producer responsibility (EPR) model for managing household e-waste in Malaysia / Chow Ching Yan. Masters thesis, University of Malaya.

Chu, Kok Wei (2015) The effect of indoor environmental quality on occupant's perception of performance in old student dormitories of University of Malaya / Chu Kok Wei. Undergraduates thesis, University of Malaya.

Chu, Yung Jeh (2018) Conceptual design and performance analysis of a biomimetic wind turbine inspired by the Dryobalanops aromatica seed / Chu Yung Jeh. Masters thesis, University of Malaya.

Chung, Mei Kuen (2003) Network game (Literati) / Chung Mei Kuen. Undergraduates thesis, University of Malaya.

Cindy, Chai (2012) Rehabilitation of Sg Kembong open dumpsite using Geographic Information System: A case study / Cindy Chai. Masters thesis, University of Malaya.

D

Dadu, Abdul Mannan (2018) Model predictive control based on Lyapunov function and near state vector selection of four-leg inverter / Abdul Mannan Dadu. Masters thesis, University of Malaya.

Daniel Tang , Kuok Ho (2018) Safety performance measurement framework for offshore oil and gas platforms in Malaysia / Daniel Tang Kuok Ho. PhD thesis, University of Malaya.

Darji, Dazylah (2016) Dissolution of rubber biomass in imidazoliumbased ionic liquid for regeneration of cellulose / Dazylah Darji. PhD thesis, University of Malaya.

Darren Ashwin, De Silva (2018) Structural and moadl analysis of rail vehicle car body using finite element method / Darren Ashwin De Silva. Masters thesis, University of Malaya.

Daruni, Krairak (2012) A genre-based analysis of tourism homepages of Thailand / Daruni Krairak. Masters thesis, University of Malaya.

Deraman, Rafikullah (2014) Implementing e-purchasing framework in construction organizations / Rafikullah Bin Deraman. PhD thesis, University Malaya.

Dg Badariah, Ag Ali (2015) Issues and challenges in selection of maintenance strategies: The case of government office buildings in Kota Kinabalu / Dg Badariah Ag Ali. Undergraduates thesis, University of Malaya.

Die , Hui Hui (2005) Cutting and grabbing simulation of laparoscopic cholecystectomy in dekstop environment / Die Hui Hui. Masters thesis, University of Malaya.

Dilkumar, Marimuthu (2017) Qualitative evaluation of cardiac diagnostic machines in National Heart Institute of Malaysia / Dilkumar Marimuthu. Masters thesis, University of Malaya.

Dinesh, Murgis (2018) Incorporation of safety, health and environmental aspects for medical devices in Malaysia / Dinesh Murgis. Masters thesis, University of Malaya.

Dng, Lai Chet (2012) Case study of air distribution of the hospital operating room in Malaysia / Dng Lai Chet. Masters thesis, University of Malaya.

Doraisamy , Ramasamy (2004) Motor Franchise Claim System (MFCS) / Doraisamy Ramasamy. Undergraduates thesis, University of Malaya.

E

Ebrahim Ali , Ahmed Al-Fakih (2015) Design and development of a fiber bragg grating-based technique for interface pressure measurement inside below-knee prosthetic sockets / Ebrahim Ali Ahmed Al-Fakih. PhD thesis, University of Malaya.

Edwind , Liaw Yee Kang (2017) Computer vision based traffic signs recognition system / Edwind Liaw Yee Kang. Masters thesis, University of Malaya.

Ehsan, Soodmand (2012) The controlling of dynamics parameters of knee joint in transfemoral amputee gait / Ehsan Soodmand. Masters thesis, University of Malaya.

Eida Nadirah , Roslin (2013) A model for full-blown implementation of lean manufacturing system in Malaysian automative industry / Eida Nadirah Roslin. PhD thesis, University of Malaya.

Einly, Lim (2005) Data aquisition and communication system for a brain-computer interface / Einly Lim. Masters thesis, University of Malaya.

Eliyana, Akram (2018) Environmental management system for small business :|ba case study at a shell petrol filling station, Dziyalite Resources Sdn. Bhd. / Eliyana Akram. Masters thesis, University of Malaya.

Ema Shuaida, Shuaid (2000) Pengkalan web bermaklumat untuk PMR (Bahasa Inggeris) / Ema Shuaida Shuaid. Undergraduates thesis, University of Malaya.

Emad, Sadeghinezhad (2015) Study of thermo-physical properties, heat transfer and frictional loss of GNPS, NDG and rGO nanofluids in closed conduit flow / Emad Sadeghinezhad. PhD thesis, University of Malaya.

Emirasfa, Abd. Rashid (2002) Sistem penjanaan jadual waktu FSKTM / Emirasfa Abd. Rashid. Undergraduates thesis, University of Malaya.

Eraj Humayun, Mirza (2016) Development of a scaffold incorporating zinc-oxide nano-particles for cartilage tissue engineering under physiological conditions / Eraj Humayun Mirza. PhD thesis, University of Malaya.

Esmaeil, Ahmadinia (2014) Waste plastic bottles as additive for stone mastic asphalt / Esmaeil Ahmadinia. Masters thesis, University of Malaya.

Evi , Aprianti S (2017) Effect of curing condition on the characteristics of mortar containing high volume supplementary cementitious materials / Evi Aprianti S. PhD thesis, University of Malaya.

Ezalia , Mohd Fauzi (2017) A study on the performance and stability of hollow fiber supported liquid membranes using ionic liquid as bi-functional carriers for extraction of mercury / Ezalia Mohd Fauzi. Masters thesis, University of Malaya.

F

Fadiyatul Nabilah, Abu Bakar (2017) Assessment of permit-to-work (PTW) system in a pipeline operator company /Fadiyatul Nabilah Abu Bakar. Masters thesis, University of Malaya.

Farah Amalina , Ahmad Suhaimi (2018) Effectiveness of safety, health and environment practice in manufacturing industries :A case study of spray booth area at selected company in Kota Damansara, Selangor / Farah Amalina Ahmad Suhaimi. Masters thesis, University of Malaya.

Farahin , Mohd Jais (2017) Development of effective modified palm shell waste-based activated carbon adsorbents for pollutants removal / Farahin Mohd Jais. Masters thesis, University of Malaya.

Farahiyah , Jasni (2018) Configuration and analysis of piezoelectric-based in socket sensory system for transfemoral prosthetic Gait detection / Farahiyah Jasni. PhD thesis, University of Malaya.

Farhood, Sarrafzadeh Javadi (2013) Heat transfer and energy efficiency analysis of domestic refrigerator using nanorefrigerant / Farhood Sarrafzadeh Javadi. Masters thesis, University of Malaya.

Farid, Shiman (2012) EEG signal analysis before and after performing salat on gamma band / Farid Shiman. Masters thesis, University of Malaya.

Farihah, Shariff (2015) An on-line photovoltaic monitoring system using the zigbee based wireless network / Farihah Shariff. Masters thesis, University of Malaya.

Farihahusnah, Hussin (2013) Acid activation of bleaching earth for crude palm oil treatment / Farihahusnah Hussin. Masters thesis, University of Malaya.

Farshad , Golshan (2018) Non-invasive diagnosis of osteoarthritis using Vibroarthrography approach / Farshad Golshan. Masters thesis, University of Malaya.

Fatemeh, Rasooli Haghighi (2013) Earned Value Management System in Manufacturing Industry / Fatemeh Rasooli Haghighi. Masters thesis, University of Malaya.

Fatemeh, Saadat Ghareh Bagh (2014) Ionic liquids and deep eutectic solvents and their potential use in production of sodium / Fatemeh Saadat Ghareh Bagh. PhD thesis, University of Malaya.

Fatemeh , Molaei Vaneghi (2012) EEG analysis of opioid-dependents during methadone maintenance / Fatemeh Molaei Vaneghi. Masters thesis, University of Malaya.

Fatima , Ajmal (2017) Factors influencing electronic commerce adoption in Malaysian small and medium sized enterprises (SMES) / Fatima Ajmal. PhD thesis, University of Malaya.

Fatimah Nadhirah, Isa (2017) Machinery risk assessment during warehouse racking installation / Fatimah Nadhirah Isa. Masters thesis, University of Malaya.

Fatin Syazana , Jamaludin (2013) High aspect ratio microfilling for MEMS using metal nanopowder / Fatin Syazana Jamaludin. Masters thesis, University of Malaya.

Fauziah, Arshad (2016) Life cycle assessment of the handling and transportation of palm oil, palm olein and palm stearin / Fauziah Arshad. Masters thesis, University of Malaya.

Fauziah, Che Mat (2018) Graphene oxide polymer film as q-switcher and mode-locker in 1.5 micron region /Fauziah Che Mat. Masters thesis, University of Malaya.

Fawad, Ahmed Memon (2012) The comparison of bio electrical properties of leech oil and aroma oil for foot refloxology massage / Fawad Ahmed Memon. Masters thesis, University of Malaya.

Firdaus, Ghazali (2013) Investigation of electro-coagulation process for the reduction of total suspended solids from palm oil mill effluent / Firdaus Ghazali. Masters thesis, University of Malaya.

Foad, Nasouri (2013) Thermal performance analysis of solar thermal system integrated with phase change material / Foad Nasouri. Masters thesis, University of Malaya.

Forough, Ataollahi (2015) Effects of substrate stiffness on phosphorylation of endothelial nitric oxide synthase and nitric oxide bioavailability / Forough Ataollahi. Masters thesis, University of Malaya.

G

Gan, Chin Lay (2016) A framework for implementing mobile interactive lecture information systems in Higher Learning Institutions / Gan Chin Lay. PhD thesis, University of Malaya.

Gan, Joo Kong (2014) Human resource for science and technology: The implementation of the 60:40 policy in selected secondary schools / Gan Joo Kong. PhD thesis, University of Malaya.

Gan, Keng Hoon (2013) A flexible query transformation framework for structured retrieval / Gan Keng Hoon. PhD thesis, University of Malaya.

Gan, Teck Wan (2012) Finite element analysis and experiemental verification of polymer melt temperature and product shrinkage in injection molding / Gan Teck Wan. Masters thesis, University of Malaya.

Gary, Tan (2018) Effect of Oxidation temperature on the thin film samarium (III) oxide growth on germanium subtrate / Gary Tan. Masters thesis, University of Malaya.

Ghazi Jahani, Faegheh Mohammadi (2014) Information quality dimensions of farsi web-based learning resources for instructional use / Faegheh Mohammadi Ghazi Jahani. PhD thesis, University of Malaya.

Goh, Kian Heng (2017) Samarium oxide and samarium oxynitride thin film gate oxides on silicon substrate / Goh Kian Heng. PhD thesis, University of Malaya.

Goh, Kian Wei (2017) Effect of pH and calcination temperature on co-precipitated indium oxide nanoparticles / Goh Kian Wei. Masters thesis, University of Malaya.

Goh, Ying Xin (2015) Electrodeposition and characterization of SN-BI lead-free soldier alloys / Goh YingXin. PhD thesis, University of Malaya.

Goi , Lai Yoong (2002) Web-based counseling system / Goi Lai Yoong. Undergraduates thesis, University of Malaya.

Govindaraju, Kalimuthu (2015) Influences of seepage into walls, curvature and bifurcation on pressure drop calculation in idealized arteries : A computational fluid dynamics approach / Govindaraju Kalimuthu. PhD thesis, University of Malaya.

H

Habiba, Umma (2016) The preparation of chitosan/PVA/zeolite electrospun composite nanofibrous membrane for heavy metal removal application / Umma Habiba. Masters thesis, University of Malaya.

Hairuddin, Basri (2018) A study on ohsas 18001: 2007 implementation in tl offshore sdn bhd / Hairuddin Nasri. Masters thesis, University of Malaya.

Hakimeh, Wakily (2012) Colloidal filtration of alumina-zirconia with solid oxide additives / Hakimeh Wakily. Masters thesis, University of Malaya.

Halida, Burkhan (2002) Total kindergarten management system / Halida Burkhan. Undergraduates thesis, University of Malaya.

Hamed, Benisi Ghadim (2016) Modelling of the bio-ecological drainage system using infoworks SD / Hamed Benisi Ghadim. PhD thesis, University of Malaya.

Hamed, Khajeh Arzani (2012) Numerical simulation of forced convection heat transfer of laminar cuo-water nanofluid flow through a horizontal 180 degree curve pipe / Hamed Khajeh Arzani. Masters thesis, Universiti Malaya.

Hamid, Taheri (2013) Fracture mechanics analysis of geometrically nonlinear thin plates by FEM /Hamid Taheri. Masters thesis, University of Malaya.

Hamid , Nalbandian Abhar (2013) Dynamic analysis of the tower crane / Hamid Nalbandian Abhar. Masters thesis, University of Malaya.

Hamid , Sinaei (2018) Behavior of RC beam-column connections strengthened with externally bonded FRP composites / Hamid Sinaei. PhD thesis, University of Malaya.

Hamidreza, Golabi (2015) Effect of joint flexibility on the nonlinear static and dynamic behaviour of offshore jacket platforms / Hamidreza Golabi. Masters thesis, University of Malaya.

Hamidreza, Hashamdar (2012) An efficient method for nonlinear dynamic analysis of 3D space structures /Hamidreza Hashamdar. PhD thesis, University of Malaya.

Hanieh, Borhanazad (2013) Techno economic analysis of stand-alone hybrid renewable energy system / Hanieh Borhanazad. Masters thesis, University of Malaya.

Har , Wai Keong (2000) Student Information System (online course registration system) / Har Wai Keong. Undergraduates thesis, University of Malaya.

Haris, Akram (2014) A study on hydroxyapatite concentration in fibrous scaffolds and its effect on rat bone marrow stem cell proliferation / Haris Akram. Masters thesis, University of Malaya.

Harizam, Mohd Zin (2013) Optimisation of laser cutting parameters of oil palm wood / Harizam Mohd Zin. Masters thesis, University of Malaya.

Hartomo, - (2013) Development of ergonomic-axiomatic design parameters for virtual environment / Hartomo. PhD thesis, University of Malay.

Haruna , Chiroma (2015) Neuro – Genetic model for the projection of crude oil price capable of handling of uncertainty / Haruna Chiroma. PhD thesis, University of Malaya.

Harvinderjit Singh, Gornam Singh (2003) Intelligent tutoring system using natural language dialogues / Harvinderjit Singh Gornam Singh. Undergraduates thesis, University of Malaya.

Hasan, Haitham Sabah (2014) Static hand gesture recognition using artificial neural network / Haitham Sabah Hasan. PhD thesis, University of Malaya.

Hassan, Alli (2015) A design methodology incorporating user requirements and preferences for a successful product / Hassan Alli. PhD thesis, University of Malaya.

Hassanuddin, Ismail (2013) Development of boronized duplex stainless steel mini gear through superplastic deformation / Hassanuddin Ismail. Masters thesis, University of Malaya.

Hatem Mohamed, Abdelwahab Al-Gabroun (2010) Study of carbon black-epoxy based fat tissue phantom and its dielectric properties / Hatem Mohamed Abdelwahab Al-Gabroun. Masters thesis, University of Malaya.

Haziratul Mardhiah, Hamdan (2017) Biodiesel synthesis via heterogeneous carbon acid catalysis from de-oiled jatropha curcas waste / Haziratul Mardhiah Hamdan. Masters thesis, University of Malaya.

Hazrul Izwan, Hussein (2018) Load flow, largest motor starting, short circuit & protection relay coordination in gas compressor station / Hazrul Izwan Hussein. Masters thesis, University of Malaya.

Hazyzyizuan, Abu Hassan (2003) Sistem Pengkategorian Teks / Hazyzyizuan Abu Hassan. Undergraduates thesis, University of Malaya.

Hee, Ay Ching (2012) Preparation of ferrite layers by electrophoretic deposition / Hee Ay Ching. Masters thesis, University of Malaya.

Herda Yati, Katman (2016) Rutting resistance of SMA mixtures incorporating crumb rubber / Herda Yati Katman. PhD thesis, University of Malaya.

Hidayah, Mohd Khalid (2011) Embedment of hydroxyapatite (HA) on titanium alloy (Ti6AI4V) via superplastic deformation method for medical application / Hidayah Mohd Khalid. Masters thesis, University of Malaya.

Hindia, Mhd Nour (2015) Enhancing the QoS performance for mobile station over LTE and WiMAX networks / Mhd Nour Hindia. PhD thesis, University of Malaya.

Ho, Kar Wei (2013) Fouling behaviour during ultrafiltration of skim latex / Ho Kar Wei. Masters thesis, University of Malaya.

Ho, Seck Wei (2017) Racing car detection using cascaded classifier / Ho Seck Wei. Masters thesis, University of Malaya.

Ho, Yong Kuen (2011) Adaptive-model based self-tuning generalized predictive control of a biodiesel reactor / Ho Yong Kuen. Masters thesis, University of Malaya.

Ho , Kai Keong (2018) Automotive evalution complementraty tool for recoverability and reusability / Ho Kai Keong. Masters thesis, University of Malaya.

Hossein, Gholizadeh Vazvani (2015) Clinical evaluation and improvement of prosthetic suspension systems for lower limb amputees / Hossein Gholizadeh Vazvani. PhD thesis, University of Malaya.

Hossein, Gholizadeh Vazvani (2012) Study of stump-liner/socket interface movement for ICEROSS Seal-in X5 and Dermo Liners in transtibial amputees / Hossein Gholizadeh Vazvani. Masters thesis, University of Malaya.

Houman, Yarmand (2013) Computational simulation of heat transfer enhancement by using nanofluid in a rectangular heated pipe / Houman Yarmand. Masters thesis, University of Malaya.

Huan, Hui Yan (2017) Efficiency enhancement of distributed power amplifier design for radio frequency communication systems / Huan Hui Yan. Masters thesis, University of Malaya.

Huang, Wen Jie (2015) A corpus-driven analysis of male and female weblog users in an ESL context / Huang Wen Jie. Masters thesis, University of Malaya.

Hussain, Fayaz (2013) Thermal, economic and environmental analysis of domestic solar water heaters in Malaysia / Fayaz Hussain. Masters thesis, University of Malaya.

Hussein Togun, Abdullah (2015) Experimental and numerical study of heat transfer to nanofluid flow in sudden enlargement of annular concentric pipe / Hussein Togun Abdullah. PhD thesis, University of Malaya.

I

Ibitoye, Morufu Olusola (2017) Mechanomyography for neuromuscular electrical stimulation feedback applications in persons with spinal cord injury / Ibitoye Morufu Olusola. PhD thesis, University of Malaya.

Ibrahim Abdulrahman, Mahmood (2018) Mode locked erbium doped fiber laser using zinc oxide thin film as saturable absorber / Ibrahim Abdulrahman Mahmood. Masters thesis, University of Malaya.

Iftekhair, Ibnul Bashar (2014) Evaluation of mechanical and fracture behaviour of POFA-FA-Metakaolin based geopolymer fibre reinforced concrete / Iftekhair Ibnul Bashar. Masters thesis, University of Malaya.

Iklil Hakimah, Hussin (2017) A three dimensional human amniotic membrane/fibrin scaffold for cartilage tissue engineering application / Iklil Hakimah Hussin. Masters thesis, University of Malaya.

Illida, Mohd Nawi (2011) Characterisation of chondrocyte matrix responses under biaxial loading / Illida Mohd Nawi. Masters thesis, University of Malaya.

Iman, Moazedi (2013) Computational study of thermal energy storage system based on nanoparticle enhanced phase change material / Iman Moazedi. Masters thesis, University of Malaya.

Indera Shah Reza, Govinathan (2018) Green initiative to reduce carbon emission for aeroplanes using Malaysia Airlines Berhad as a case study / Indera Shah Reza Govinathan. Masters thesis, University of Malaya.

Indrastuti, - (2014) Unit cost modelling of public building project in Kepulauan Riau- Indonesia / Indrastuti. PhD thesis, University of Malaya.

Irmalisa , Samsuri (2012) Constitutive modelling of Mullin's effect in swollen nitrile butadiene rubber under cyclic loading / Irmalisa Samsuri. Masters thesis, University of Malaya.

Irnie Azlin@Nur Aqilah, Zakaria (2012) Revolution of engine cooling and thermal management system / Irnie Azlin@Nur Aqilah Zakaria. Masters thesis, University of Malaya.

Ishak, Muhammad Fakhruddin (2010) Kesan teknologi moden terhadap perubahan hukum : analisis terhadap penggunaan short message service (SMS) / Muhammad Fakhruddin bin Ishak. Masters thesis, University of Malaya.

Iskandar, - (2013) Modeling and analysis of impact of sepak takraw ball on the player's head / Iskandar. PhD thesis, University of Malaya.

Ismail, M. I. Qeshta (2014) Use of wire mesh-epoxy composite for strengthening concrete beams /Ismail M. I. Qeshta. Masters thesis, University of Malaya.

J

Jafarlou, Davoud Mashhadi (2016) Study on equal channel angular extrusion of circular cross section components and its application for joining dissimilar metals / Davoud Mashhadi Jafarlou. PhD thesis, University of Malaya.

Jafferi, Jamaludin (2014) Design and implementation of a new multilevel inverter topology with shared power switches / Jafferi bin Jamaludin. PhD thesis, University of Malaya.

Jagadheswaran, Rajendran (2015) Multiband LTE power amplifier for handset application / Jagadheswaran Rajendran. PhD thesis, University of Malaya.

Jagadisa, Rajarathnam (2018) Spot welding quality check using artificial intelligence / Jagadisa Rajarathnam. Masters thesis, University of Malaya.

Jamal , Uddin Ahamedf (2012) Energy, exergy and heat transfer performance investigation of a vapor compression air conditioning system / Jamal Uddin Ahamed. PhD thesis, University of Malaya.

Janash, S.Pathamnathan (2018) Heat transfer analysis in underground cable tunnel using computational fluid dynamics / Janash S.Pathamnathan. Masters thesis, University of Malaya.

Jarina , Muhamad Ismail (2002) Perlaksanaan satu alatan pembaca Bahasa Melayu berdasarkan perbendaharaan kata tak tersekat / Jarina Muhamad Ismail. Undergraduates thesis, University of Malaya.

Jarina , Muhamad Ismail (2004) Perlaksanaan satu alatan pembaca bahasa melayu berdasarkan perbendaharaan kata tak tersekat / Jarina Muhamad Ismail. Undergraduates thesis, University of Malaya.

Jarinah , Mohd Ali (2017) Hybrid fuzzy-sliding mode observer design for estimation and advanced control of an ethylene polymerization process / Jarinah Mohd Ali. PhD thesis, University of Malaya.

Javed, Ahmed Laghari (2012) A fuzzy based load frequency control and load shedding scheme for islanded distribution network connected with mini-hydro /Javed Ahmed Laghari. Masters thesis, University of Malaya.

Jeffrey, Ng (2012) The study of thermal transfer value for medium scale mixed development in Singapore / Jeffrey Ng. Masters thesis, Universiti Malaya.

Jegathis, Murugesu (2017) Design and analysis of frame scaffolding capacity using thickness and material as variables / Jegathis Murugesu. Masters thesis, University of Malaya.

Jeyanthan, Silvalinggam (2017) Energy management and improvement strategies in a local spice manufacturing plant / Jeyanthan Silvalinggam. Masters thesis, University of Malaya.

Joyce Jessica, Michael Gumpil (2002) Expert system on crop ecology adviser / Joyce Jessica Michael Gumpil. Undergraduates thesis, University of Malaya.

Juhari, ljam (2003) Component-based stemming engine for malay text / Juhari ljam. Undergraduates thesis, University of Malaya.

Julie Norazreen , Mat Azahar (2018) Determination of steam quality and its affecting parameters on a steam turbine / Julie Norazreen Mat Azahar. Masters thesis, University of Malaya.

Justin Gerard, K. Gerard (2015) Role of current density in impress current cathodic protection of stainless steel in 3.5% NaCI solution / Justin Gerard K. Gerard. Masters thesis, University of Malaya.

K

Kamal, Kamaruddin (1970) Indigenous irrigation systems along the Ulu Triang and two tributary river valleys in the district of Jelebu (Negri Sembilan) / Kamal Kamaruddin. Undergraduates thesis, University of Malaya.

Kamalasrinny , Radhakrisnnan (2012) Numerical simulation of bileaflet heart valve prostheses in aortic position / Kamalasrinny Radhakrisnnan. Masters thesis, University of Malaya.

Kamrun, Nahar (2012) Effect of acupuncture therapy on body composition parameters / Kamrun Nahar. Masters thesis, University of Malaya.

Kamsani, Kamal (2012) Numerical simulation of rubber panel under impact loading / Kamsani Kamal. Masters thesis, University of Malaya.

Karen Bong , Hui Ju (2018) Natural ventilation design of UNHCR family tent / Karen Bong Hui Ju. Masters thesis, University of Malaya.

Karthikeyan, Balasubramaniam (2013) Thermal stress analysis of butt welded joint / Karthikeyan Balasubramaniam. Masters thesis, University of Malaya.

Karunan, Joseph (2017) Development of power generation system using piezoelectric and electromagnetic induction techniques on lab-on-a-disc (LOD) for localized heating / Karunan Joseph. Masters thesis, University of Malaya.

Kashani, Masoumeh Moayeri (2016) Hydrodynamic behaviours of fine sediment in retention structure using particle image velocimetry / Masoumeh Moayeri Kashani. PhD thesis, University of Malaya.

Kevin Kumar, Santiago George (2018) Performance analysis of various domestic lighting luminaires / Kevin Kumar Santiago George. Masters thesis, University of Malaya.

Khairi A.M., Elrmali (2018) Investigation on Stand-Alone Solar System for rural electrification / Khairi A.M. Elrmali. Masters thesis, University of Malaya.

Khaled Mageed , Ahmad A E Al Qattan (2017) Assessment of the physicochemical properties of drinking water of selected schools in Kuwait / Khaled Mageed Ahmad A E Al Qattan. Masters thesis, University of Malaya.

Khalidah, Ahmad Kamil (2018) Layout design for mass customisation production: An action based case study in small enterprise / Khalidah Ahmad Kamil. Masters thesis, Universiti Malaya.

Khalil Ahmed , Qasem As'ham (2017) Frequency reuse and power control for interference mitigation in femtocell lte-a network / Khalil Ahmed Qasem As'ham. Masters thesis, University of Malaya.

Khan, Abdul Nasir (2014) Energy-efficient data security schemes for mobile users in cloud environment / Abdul Nasir Khan. PhD thesis, University of Malaya.

Khan, Atta Ur Rehman (2014) Mobile cloud computing for smartphones: Application development model and application piracy control / Atta Ur Rehman Khan. PhD thesis, University of Malaya.

Khanmirzaei, Mohammad Hassan (2015) Preparation and characterization of rice starch based solid polymer electrolytes for dye−sensitized solar cell application / Mohammad Hassan Khanmirzaei. PhD thesis, University of Malaya.

Khoo, Shin Yee (2013) Enhancement of impact force determination with modal transformation method by using integration and data filtering /Khoo Shin Yee. PhD thesis, University of Malaya.

Kinarroy, Vaithianathan. (2014) The effects of bird's nest as a cryopotective agent on human adipose derived stem cells / Kinarroy Vaithianathan. Masters thesis, University of Malaya.

Kiruban , Poovan (2000) Web-based counseling system / Kiruban Poovan. Undergraduates thesis, University of Malaya.

Kong , Yeo Lee (2017) Modelling of surface morphologies in disordered organic semiconductors using fractal methods / Kong Yeo Lee. PhD thesis, University of Malaya.

Kow, Kien Woh (2014) Synthesis and characterization of bamboo leaf based carbon-opacified silica aerogel (COSA) / Kow Kien Woh. PhD thesis, University of Malaya.

Ku Nurul Edhura , Ku Ahamad (2013) An effective islanding detection method for photovoltaic grid connected inverter / Ku Nurul Edhura Ku Ahamad. Masters thesis, University of Malaya.

Kugaanesaan, Murthy (2018) Efficient water management system in pharmaceutical manufacturing premises / Kugaanesaan Murthy. Masters thesis, University of Malaya.

L

Lai, Man Hong (2017) Regeneration and thermal stress modification in fiber bragg grating using Co2 laser annealing technique / Lai Man Hong. PhD thesis, University of Malaya.

Laith Mahmoud, Mohammad Halabi (2017) Performance analysis of hybrid renewable energy systems used for rural electrification in Malaysia / Laith Mahmoud Mohammad Halabi. Masters thesis, University of Malaya.

Larvenyia, Muthusamy (2004) Student Advisee Management System / Larvenyia Muthusamy. Undergraduates thesis, Universiti of Malaya.

Lau, Kung Shiuh (2016) Formation of hybrid cdse-loaded tio2 nanotubes for solar-driven photoelectrochemical water splitting process / Lau Kung Shiuh. Masters thesis, University of Malaya.

Leang, So Khuong (2017) Experimental study and improvement on tribological behaviors of automotive lubricants with dilution of various gasoline-bioethanol blends / Leang So Khuong. Masters thesis, University of Malaya.

Lee, Boon Keong (2003) E-Lecture online system / Lee Boon Keong. Undergraduates thesis, University of Malaya.

Lee, Cherk Yong (2011) Performance investigation on plate heat exchanger using nanofluid as working fluid / Ler Cherk Yong. Masters thesis, University of Malaya.

Lee, Wee Shen (2014) Strategy for the bioconversion of palm oil mill effluent into volatile fatty acids for the production of biodegradable polyhdroxyalkanoates / Lee Wee Shen. Masters thesis, University of Malaya.

Lee , Ying Keng (2001) Student society information system (SSIS) / Lee Ying Keng. Undergraduates thesis, University of Malaya.

Lee Shun , Fen (2003) World of Tang Dynasty Poems (WTDPP)/ Lee Shun Fen. Undergraduates thesis, University of Malaya.

Leong, Kin Yuen (2013) Thermal and energy performance of nanofluid operated heat recovery exchanger / Leong Kin Yuen. PhD thesis, University of Malaya.

Leong, Siong Hean (2013) Numerical investigation of top-seat angle connections at elevated temperatures / Leong Siong Hean. Masters thesis, University of Malaya.

Leong , Keat Poh (2005) Embedded system / Leong Keat Poh. Undergraduates thesis, University of Malaya.

Letchumanan, Lakshmanan (2012) Heat transfer performance investigation of a water cooled chiller operated with nanofluid / Letchumanan Lakshmanan. Masters thesis, University of Malaya..

Leyla, Roohisefat (2014) Neural response based speaker identification under noisy condition / Leyla Roohisefat. Masters thesis, University of Malaya.

Lian, Yee Cheng (2015) Air flow buoyancy surrounding buildings in Malaysia / Lian Yee Cheng. Masters thesis, University of Malaya.

Lim, Fong Peng (2016) Statistical appraisal in solving some medical problems / Lim Fong Peng. PhD thesis, University of Malaya.

Lim, Kheng Teong (2003) A computer aided learning package about countries (CALPAC) / Lim Kheng Teong. Undergraduates thesis, University of Malaya.

Lim, Say Li (2017) Processing time estimation in precision machining industry using AI / Lim Say Li. Masters thesis, University of Malaya.

Lim, Su Pei (2015) Fabrication of noble metal modified titania photoanode for higher efficiency dye-sensitized solar cells / Lim Su Pei. PhD thesis, University of Malaya.

Lim, Wen Jun (2017) Design of wideband power amplifier for gan hemt for radio application / Lim Wen Jun. Masters thesis, University of Malaya.

Lim, Weng Hong (2016) Optical characteristics of graphene oxide film and its application in planar waveguide devices / Lim Weng Hong. PhD thesis, University of Malaya.

Lim, Xin Le (2015) Feasibility study on implementation of marine renewable energy in Malaysia by considering the project costs and urban public acceptance / Lim Xin Le. Masters thesis, University of Malaya.

Lim, Yu Dian (2013) Synthesis and characterizations of amorphous carbon nanotubes / gold particles hybrid materials / Lim Yu Dian. Masters thesis, University of Malaya.

Lim , Choon Hoe (2003) Neighbourhood watch community portal: Local residential area / Lim Choon Hoe. Undergraduates thesis, University of Malaya.

Lim , Chun Yit (2005) E-Abacus animator / Lim Chun Yit. Undergraduates thesis, University of Malaya.

Lim , Hong Cheet (2018) Automated impact device based on phase synchronisation assessment for the enhancement of impact-synchronous modal analysis during operation / Lim Hong Cheet. PhD thesis, University of Malaya.

Liow , Chee Shing (2018) A study on modulation techniques for 5g / Liow Chee Shing. Masters thesis, University of Malaya.

Liu, Kit Fook (2017) Detection of defect in concrete using elastic wave tomography reconstruction technique / Liu Kit Fook. Masters thesis, University of Malaya.

Liza, Ferina (2013) Optimization of aqueous Remazol Brilliant Blue R (RBBR) decolorization by trametes sp. pellets in Fluidized Bed Biological Reactor (FBBR) / Liza Ferina. Masters thesis, University of Malaya.

Lizaroziyanti, Yusri (2018) Hazard identification and evaluation in solar photovoltaic installation process of a selected energy solution provider company / Lizaroziyanti Yusri. Masters thesis, University of Malaya.

Loh, Yin Kuan (2012) Experimental and computational study of stresses on outdoor piping of domestic air conditioner / Loh Yin Kuan. Masters thesis, University of Malaya.

Loh , May Ping (2003) 3D Multimedia learning package (kids world) / Loh May Ping. Undergraduates thesis, University of Malaya.

Loo , Hoi Keong (2004) Intelligent tutoring system using interactive agent (Echem) / Loo Hoi Keong. Undergraduates thesis, University of Malaya.

Low, Tian Huat (2001) Water infiltration study on slopes / Low Tian Huat. Masters thesis, University of Malaya.

Low, Wan Shi (2017) Optimization of yield for circulating tumour cell separation using integrated dielectrophoretic-magnetophoretic technique / Low Wan Shi. Masters thesis, University of Malaya.

Low , Yan Jie (2018) Deposition and characterization of germanium nitride film using different thermal nitridation temperature / Low Yan Jie. Masters thesis, University of Malaya.

Lubabatu, Baballe Ila (2015) Design and development of A 3-Degree of freedom parallel manipulator / Lubabatu Baballe Ila. Masters thesis, University of Malaya.

Lukman Hakim , Mohd Ibrahim (2003) Sistem Perkhidmatan Pelajar Perdana Siswa (Sistem Tempahan Ruang) / Lukman Hakim Mohd Ibrahim. Undergraduates thesis, University of Malaya.

Luo, Dong (2013) Assessment of tapered plastic fiber sensors in the applications of structural health monitoring / Luo Dong. PhD thesis, University of Malaya.

M

Maaspaliza, Azri (2014) Comparison of single-phase transformerless photovoltaic grid-connected inverter topologies with high efficiency and low ground leakage current / Maaspaliza Azri. PhD thesis, University of Malaya.

Magadesh , Permal (2001) Kiosk kolej Kediaman UM / Magadesh Permal. Undergraduates thesis, University of Malaya.

Mageswaran, Murugiya (2018) Application of material flow cost accounting (MFCA) in microalgae manufacturing company in Malaysia / Mageswaran Murugiya. Masters thesis, University of Malaya.

Mahak, Fazal (2013) Characterisation of viscoelastic response of swollen elastomers / Mahak Fazal. Masters thesis, University of Malaya.

Mahdi , Ghazvini (2012) Development and impact of fuel economy standards and labels for heavy duty vehicles in Iran / Mahdi Ghazvini. Masters thesis, University of Malaya.

Mahdi Ezwan, Mahmoud (2012) Fabrication and characterization of nano-TiO[2] thin films from local mineral precursors / Mahdi Ezwan Mahmoud. Masters thesis, University of Malaya.

Mahdi Mansouri, - (2016) Physiological control of an implantable rotary blood pump / Mahdi Mansouri. PhD thesis, University of Malaya.

Mahmoud Sarhan, Saddam Own (2018) Study of residual stress and microstructure evolution in magnesium alloy (WE43) due to deformation process via (PTCAP) / Mahmoud Sarhan Saddam Own. Masters thesis, University of Malaya.

Mahmoudi, Mohadeseh (2012) Physical attributes of streetscape in the inner city of Kuala Lumpur: Case study of Bukit Bintang Street and Tun Perak Street / Mohadeseh Mahmoudi Mohadeseh Mahmoudi. Masters thesis, University of Malaya.

Mahyar, Silakhori (2012) Preparation and characterization of microencapsulated paraffin wax as PCM for thermal energy storage / Mahyar Silakhori. Masters thesis, University of Malaya.

Maisarah, Hasbullah (2012) Respons pemikir Islam terhadap modeniti : wacana sains Islam sebagai kajian kes di Malaysia / Maisarah Hasbullah. PhD thesis, University of Malaya.

Maisarah, Lutfi (2012) Hybrid microwave sintering of Zinc Aluminum Alloy / Maisarah Lutfi. Masters thesis, University of Malaya.

Majd, Elham (2015) A trust model for advisor networks in multi-agent environments / Elham Majd. PhD thesis, University of Malaya.

Mala, Arumugam (2003) Penang Medical Centre System (PMCS) / Mala Arumugam. Undergraduates thesis, University of Malaya.

Malar, Kandasamy (2018) Awareness among students, teachers and parents on safety compliances in primary and secondary schools in Malaysia / Malar Kandasamy. Masters thesis, University of Malaya.

Malathi, Kaliappan (2000) Pembangunan laman web bermultimedia bagi sebuah sekolah / Malathi Kaliappan. Undergraduates thesis, University of Malaya.

Malathy, Batumalay (2014) Tapered plastic optical fiber sensors for chemical detection and relative humidity measurements / Malathy Batumalay. PhD thesis, University of Malaya.

Mansoor Abdullateef, Abdulgabber Abdulhak (2013) An ontology-based approach for test case management system using semantic technology / Mansoor Abdullateef Abdulgabber Abdulhak. PhD thesis, University of Malaya.

Mansourvar, Marjan (2014) Bone age assessment using hand and clavicle x-ray images / Marjan Mansourvar. PhD thesis, University Malaya.

Margaret, Sinnappan (2014) Kajian pembentukan istilah sains dan teknologi maklumat dalam akhbar harian Bahasa Tamil / Margaret A/P Sinnappan. Masters thesis, University of Malaya.

Mariati, Rahman (2003) Sistem penapisan imej / Mariati Rahman. Undergraduates thesis, University of Malaya.

Marina, Abdul Majid (2017) A study of biosecurity international instruments in the context of the international sustainable development law principles and in relation to genetically-modified organisms / Marina binti Abdul Majid. PhD thesis, University of Malaya.

Mary Anne, Soosay (2003) Hospital management system / Mary Anne Soosay. Undergraduates thesis, University of Malaya.

Marziehalsadat, Jazyeri Shooshtari (2018) Finite and infinite singular arc in Chemotherapy schedulling using optimal control theory / Marziehalsadat Jazayeri Shooshtari. Masters thesis, University of Malaya.

Masoud, Kamalisarvestani (2012) The effect of smart coatings on the radiation passing through glazing / Masoud Kamalisarvestani. Masters thesis, University of Malaya.

Masoud, Sarraf (2013) Techno-economic analysis of solar home system (SHS) in Cambodia / Masoud Sarraf. Masters thesis, University of Malaya.

Masoud , Sarraf (2017) Mechanical and biological behaviors of titania and tantala nanotubular arrays decorated with silver oxide on Ti-6Al-4V alloy / Masoud Sarraf. PhD thesis, University of Malaya.

Maysam, Oladazimi (2011) EEG analysis of opioid-dependents after methadone maintenance / Maysam Oladazimi. Masters thesis, University of Malaya.

Mazhar, Hussain Abbasi (2013) Sensor-less vector control using adaptive observer scheme for controlling the performance of the induction motor / Mazhar Hussain Abbasi. Masters thesis, University of Malaya.

Maziah , Borhanuddin (2018) Awareness perceptions among managements, teachers and school staffs related to safety, health and environment aspects in special education primary schools / Maziah Borhanuddin. Masters thesis, University of Malaya.

Mazlan, Shah (2013) Development of cutting tool through superplastic deformation methods on boronized duplex stainless steel / Mazlan Shah. Masters thesis, University of Malaya.

Md Abdul , Quader (2015) A hybrid multi-criteria analysis of energy efficient CO2 iron making technologies with carbon capture and storage / Md Abdul Quader. Masters thesis, University of Malaya.

Md Belayet, Hossain (2014) Development of ultrasound image contrast enhancement and speckle noise reduction for knee osteoarthritis early detection / Md Belayet Hossain. Masters thesis, University of Malaya.

Md Ismail , Hossain (2016) Dyeing process parameter optimization and quality characteristics modeling for viscose blended knitted fabrics / Md Ismail Hossain. PhD thesis, University of Malaya.

Md Morshed, Alam (2018) A dynamic wireless electric vehicle charging system with uniform coupling factor and negligible power / Md Morshed Alam. Masters thesis, University of Malaya.

Md Palash , Sarker (2017) Performance and emissions analysis of jatropha and aphanamixis polystachya methyl esters and investigation of NOx additive in CI diesel engine / Md Palash Sarker. Masters thesis, University of Malaya.

Md Whaiduzzaman, Abdullah (2016) Performance enhancement framework for cloudlet in mobile cloud computing / Md Whaiduzzaman. PhD thesis, University of Malaya.

Md. Akter, Hosen (2015) Structural performance of RC beams strengthened with NSM (soffit and side) / Md. Akter Hosen. Masters thesis, University of Malaya.

Md. Alhaz , Uddin (2012) Nonlinear response prediction of spar platform using artificial neural network / Md. Alhaz Uddin. Masters thesis, University of Malaya.

Md. Arafat, Mahmood (2012) Effects of molybdenum nanoparticles on lead-free tin-based solder / Md. Arafat Mahmood. Masters thesis, University of Malaya.

Md. Fayeem , Aziz (2014) Applications of hidden Markov model and support vector machine for state estimation / Md.Fayeem Aziz. Masters thesis, University of Malaya.

Md. Hasanuzzaman, - (2011) Energy, exergy, and environmental analysis for energy intensive industrial equipment in Malaysia / Md. Hasanuzzaman. PhD thesis, University of Malaya.

Md. Imran, Hosen (2012) A comprehensive approach of groundwater vulnerability and potentiality assessment of Melaka catchment in Malaysia / Md. Imran Hosen. Masters thesis, University of Malaya.

Md. Jakirul , Islam (2013) Prediction technique on the effect of human motion on indoor radio wave propagation / Md. Jakirul Islam. Masters thesis, University of Malaya.

Md. Khairul , Islam (2016) Performance analysis of parabolic trough concentrated solar system / Md. Khairul Islam. Masters thesis, University of Malaya.

Md. Masum, Billah (2014) Optimization of alcohol-gasoline blended fuel for improving performance and reducing exhaust emission of engine / Md. Masum Billah. Masters thesis, University of Malaya.

Md. Mofijur , Rahman (2013) Performance analysis of palm, jatropha and moringa biodiesels in a diesel engine / Md. Mofijur Rahman. Masters thesis, University of Malaya.

Md. Ruhul , Amin (2017) Optimization of aphanamixis based biodiesel and its combustion characteristics / Md.Ruhul Amin. Masters thesis, University of Malaya.

Md. Sadek , Uddin Chowdhury (2017) Study on water quality and heavy metals in relation to landuse activities of Selangor River / Md.Sadek Uddin Chowdhury. Masters thesis, University of Malaya.

Md. Sakinul, Islam (2012) Characterization of degradation products of activated diethanolamine and methyldiethanolamine during carbon dioxide absorption and desorption processes / Md. Sakinul Islam. Masters thesis, University of Malaya..

Md. Sohel, Rana (2015) Tikhonov based well-conditioned asymptotic waveform evaluation technique for heat conduction / Md. Sohel Rana. Masters thesis, University of Malaya.

Md. Sumon, Sarker (2011) An efficient model for indoor radio signal prediction and coverage estimation / Md. Sumon Sarker. Masters thesis, University of Malaya.

Md. Tariqul, Islam (2015) CFD study of formation and rise characteristics of a single bubble in bubble column / Md.Tariqul Islam. Masters thesis, University of Malaya.

Md. Zahidul Islam , Bhuiyan (2012) Interface shear capacity of facing units of geosynthetic-reinforced segmental retaining walls / Md.Zahidul Islam Bhuiyan. Masters thesis, University of Malaya.

Md.Nazmul , Huda (2017) Behavior of flexural members made from oil palm shell and clinker concrete / Md. Nazmul Huda. Masters thesis, University of Malaya.

Megat Muhammad Ikhsan , Megat Hasnan (2014) Design of high force density fishbone-shaped electrostatic actuator using finite element / Megat Muhammad Ikhsan Megat Hasnan. Masters thesis, University of Malaya.

Mehdi, Mehrali (2015) Development of calcium silicate composites for bone tissue engineering / Mehdi Mehrali. PhD thesis, University of Malaya.

Mehdi , Rezaei (2012) Energy performance and cost analysis of phase change materials with different melting temperature in heating systems / Mehdi Rezaei. Masters thesis, Universiti Malaya.

Memon, Rafia Naz (2014) Problem structuring and analysis method based on soft system methodology for teaching requirements engineering / Rafia Naz Memon. PhD thesis, University Malaya.

Metrius, Benedict Sunggoh (2003) System login authentication using voice recognition and ai methods / Metrius Benedict Sunggoh. Undergraduates thesis, University of Malaya.

Michael Liu, Yong Jing (2014) Microstructure, mechanical and thermal characteristics of foamed geopolymer concrete using fly ash and palm oil fuel ash as binders / Michael Liu Yong Jing. Masters thesis, University of Malaya.

Michele , Ooi Lay Sean (2004) Wap video streaming system (WAP-VSS) / Michele Ooi Lay Sean. Undergraduates thesis, University of Malaya.

Miqdad, Khairulmainif (2012) Effect of nanoparticle shapes on heat transfer characteristics and thermodynamic performance of a shell and tube heat exchanger / Miqdad Khairulmaini. Masters thesis, University of Malaya.

Moatasem, Mohammed Fayyadh (2012) Structural assessment of damaged and CFRP repaired reinforced concrete beams from experimental modal analysis / Moatasem Mohammed Fayyadh. PhD thesis, University of Malaya.

Moayad Hani Yacoub , Abu Rmilah (2016) An integrated simulation platform for a quadcopter system with fuzzy-tuned PID controllers /Moayad Hani Yacoub Abu Rmilah. Masters thesis, University of Malaya.

Mohamad, Emma Mirza Wati (2004) Singapore one : perancangan, implimentasi dan kejayaannya / Emma Mirza Wati Mohamad. Masters thesis, University of Malaya.

Mohamad Ardan , Zubir (2015) Investigation of two-phase flow behavior and patterns in horizontal and vertical pipe / Mohamad Ardan Zubir. Masters thesis, University of Malaya.

Mohamad Arif, Muahzim (2018) Work fatigue and physiological symptoms in different occupations of high-elevation construction workers / Mohamad Arif Muahzim. Masters thesis, University of Malaya.

Mohamad Fairus, Rabuni (2014) Chemical and thermal stability studies of hydrophobic and hydrophilic Polyvinylidene Fluoride (PVDF) membranes in alkaline environments / Mohamad Fairus Rabuni. Masters thesis, University of Malaya.

Mohamad Hilman , Nordin (2012) Development of instrumentation and simulation of regenerative motor-pump system for hydraulic hybrid vehicle / Mohamad Hilman Nordin. Masters thesis, University of Malaya.

Mohamad Hussain , F Snosi (2017) Performance study of fractional frequency reuse in ofdma network / Mohamad Hussain F Snosi. Masters thesis, University of Malaya.

Mohamad Izzudin , Hussein Shah (2018) Development of damage identification scheme using de-noised modal frequency response function data with artificial neural network / Mohamad Izzudin Hussein Shah. Masters thesis, University of Malaya.

Mohamad Saufi , Supar (2018) Hazard identification and risk assessment at a selected petrol station in Klang Valley / Mohamad Saufi Supar. Masters thesis, University of Malaya.

Mohamad Syafie , Mahmood (2018) Quantum modelling of organic materials for electronics, thermoelectric, and photoluminescent applications / Mohamad Syafie Mahmood. PhD thesis, University of Malaya.

Mohamad Zihin , Mohd Zain (2018) Application of swarm intelligence optimization on bio-process problems / Mohamad Zihin Mohd Zain. Masters thesis, University of Malaya.

Mohamed Kamali, Mohd Zahurin (2015) A study on solution of matrix riccati differential equations using ant colony programming and simulink / Mohd Zahurin Mohamed Kamali. PhD thesis, University of Malaya.

Mohammad, Dabbagh (2015) An integrated approach for simultaneous prioritization of functional and nonfunctional requirements / Mohammad Dabbagh. PhD thesis, University of Malaya.

Mohammad, Dreidy (2017) Frequency control scheme for islanded distribution network with high PV penetration Mohammad Hussein / Mohammad Dreidy. PhD thesis, University of Malaya.

Mohammad, Mehrali (2015) Shape stabilized composite phase change materials for thermal energy storage systems / Mohammad Mehrali. PhD thesis, University of Malaya.

Mohammad , Abousaeidi (2016) An approach to geographic information system (GIS) modeling and determination of the quickest route for vegetable delivery / Mohammad Abousaeidi. PhD thesis, University of Malaya.

Mohammad Ahmad, Alfaouri (2017) Users' satisfaction through better space management in higher education libraries: a case study of University of Malaya library in Malaysia / Mohammad Ahmad Alfaouri. Masters thesis, University of Malaya.

Mohammad Ashraful , Alam (2016) Analysis of particulate matter, carbon emissions and elemental compositions from A diesel engine exhaust fuelled with diesel-biodesel blends / Mohammad Ashraful Alam. Masters thesis, University of Malaya.

Mohammad Hossein, Mahdavifard (2013) Effects of molybdenum nanoparticles on the interface between lead-free solder and nickel substrate / Mohammad Hossein Mahdavifard. Masters thesis, University of Malaya.

Mohammad Momeen, Ul Islam (2015) Feasibility study of ground palm oil fuel ash as partial cement replacement material in oil palm shell lightweight concrete / Mohammad Momeen Ul Islam. Masters thesis, University of Malaya.

Mohammad Rafiqul, Islam (2011) Assessment of wind energy potential mapping for Peninsular Malaysia / Mohammad Rafiqul Islam. Masters thesis, Universiti Malaya.

Mohammad Reza, Hassan (2013) Finite element simulation of creep in swollen Nitril Butadiene Rubber (NBR) pipe under internal pressure / Mohammad Reza Hassan. Masters thesis, University of Malaya.

Mohammad Saeed, Pourtahmasb (2016) Feasibility of using recycled concrete aggregate in dense-graded and gap-graded hot mix asphalts / Mohammad Saeed Pourtahmasb. PhD thesis, University of Malaya.

Mohammed, Mahbubul Islam (2015) Effect of ultrasonication on colloidal thermophysical and rheological properties of alumina-water nanofluid / Mohammed Mahbubul Islam. PhD thesis, University of Malaya.

Mohammed Ali, Abdul Hussain Al Obaidi (2004) The dynamic thermal performance of construction materials for satisfactory thermal comfort in the design of a terrace house in the Klang Valley, Malaysia / Mohammed Ali Abdul Hussain Al Obaidi. PhD thesis, University of Malaya.

Mohammed F. E. , Alnahhal (2017) Investigation on microstructure, mechanical and durability characteristics of recycled aggregate concrete with non-traditional supplementary cementitious materials / Mohammed F. E. Alnahhal. Masters thesis, University of Malaya.

Mohammed Gamal, Nasser Al-Zidi (2018) Functional effects of cortical auditory evoked potentials and hearing ADIS on speech perception in sensorineural hearing loss individuals / Mohammed Gamal Nasser Al-Zidi. Masters thesis, University of Malaya.

Mohammed Mahbubul Islam, - (2012) Investigation of fundamental properties of nanorefrigerants / Mohammed Mahbubul Islam. Masters thesis, University of Malaya.

Mohd Adam , Mohd Noor (2015) Corrosion of carbon steel in different biodiesel blends / Mohd Adam Mohd Noor. Masters thesis, University of Malaya.

Mohd Afiq , Ismail (2015) Fiber Bragg Grating : bimetal temperature sensor for solar panel inverters / Mohd Afiq Ismail. Masters thesis, University of Malaya.

Mohd Akmal, Mhd Yusoff (2013) Design and development of remote measurement for prime mover using Arduino and FR hope RFM12B / Mohd Akmal Mhd Yusoff. Masters thesis, University of Malaya.

Mohd Azan , Mohammed Sapardi (2012) Comparative study on combustion and emission characteristics on jatropha oil biodiesel with diesel / Mohd Azan Mohammed Sapardi. Masters thesis, University of Malaya.

Mohd Azri, Kasdi (2018) Optimal protection relay coordination for overcurrent relays in radial system / Mohd Azri Kasdi. Masters thesis, University of Malaya.

Mohd Bakar , Mohd Mishani (2017) Application of simplified operating deflection shape technique in machinery vibration assessment / Mohd Bakar Mohd Mishani. Masters thesis, University of Malaya.

Mohd Bukhari, Mat Salleh (2017) Ergonomics assessment for seat belt achorage location at rear center seat / Mohd Bukhari Mat Salleh. Masters thesis, University of Malaya.

Mohd Ezwan , Wahid (2018) Assessment of occupational noise expose among construction workers in a selected construction site in Putrajaya, Malaysia / Mohd Ezwan Wahid. Masters thesis, University of Malaya.

Mohd Fahmi , Azman (2013) Resource allocation based on interference coordination for Multicast-Broadcast Single Frequency Network (MBSFN) / Mohd Fahmi Azman. Masters thesis, University of Malaya.

Mohd Faiz, Mispan (2014) Development of knee joint for a motor-actuated knee prosthesis / Mohd Faiz Mispan. Masters thesis, University of Malaya.

Mohd Faizal, Fauzan (2011) Comparative exergy analysis of selected fuels for internal combustion engines / Mohd Faizal Fauzan. Masters thesis, University of Malaya.

Mohd Faizal, Fauzan (2015) Energy, heat transfer and economic analysis of flat-plate solar collector utilizing SiO2 nanofluid / Mohd Faizal Fauzan. PhD thesis, University of Malaya.

Mohd Fauzi , Zanil (2012) Neuro-fuzzy based hybrid method for modeling and control of pH neutralization / Mohd Fauzi Zanil. Masters thesis, University of Malaya.

Mohd Fazli, Ghazali (2018) Study of stump flexion contracture towards postural stability for transtibial prosthesis users / Mohd Fazli Ghazali. Masters thesis, University of Malaya.

Mohd Fikree , Hassan (2018) Improved methods to enhance the color perception for people with color vision deficiency / Mohd Fikree Hassan. PhD thesis, University of Malaya.

Mohd Firdaus , Bakri (2017) Reducing carbon emission by visiting patients activities in a screening centre through cleaner production strategies / Mohd Firdaus Bakri. Masters thesis, University of Malaya.

Mohd Firdaus , Manap (2017) Effect of free air ball (FAB) formation on wire bond integrity in palladium coated copper (PdCu) wire /Mohd Firdaus Manap. Masters thesis, University of Malaya.

Mohd Hafiz , Abdul Halim Shah (2013) Estimation of energy saving by nanofluid operated air conditioning system / Mohd Hafiz Abdul Halim Shah. Masters thesis, University of Malaya.

Mohd Hafizan , Md. Isa (2013) Self-consolidating concrete incorporating palm oil fuel ash as a supplementary cementing material / Mohd Hafizan Md. Isa. Masters thesis, University of Malaya.

Mohd Hamri, Md Yusuf (2002) Sistem pengurusan minit mesyuarat / Mohd Hamri Md Yusuf. Undergraduates thesis, University of Malaya.

Mohd Hasnun , Arif Hassan (2012) Design of a dynamometer-engine coupling shaft / Mohd Hasnun Arif Hassan. Masters thesis, University of Malaya.

Mohd Hishamuddin, A Hamid (2011) Pursuit of excellence by Muslim scientists with a special reference to Ibn Sina / Mohd Hishamuddin A Hamid. PhD thesis, University of Malaya.

Mohd Idris, Hj Odding (2003) Translation tool for english / malay and malay / english document / Mohd Idris Hj Odding. Undergraduates thesis, University of Malaya.

Mohd Isham , Ismail (2018) KY (Kiken Yochi=predict hazard) in working habit; assessment of its implementation way and effectiveness in manufacturing factory / Mohd Isham Ismail. Masters thesis, University of Malaya.

Mohd Ismail, Isa (2017) Place attachment to waterfront revitalisation development : case study of Lumut and Kuching, Malaysia / Mohd Ismail Isa. PhD thesis, University of Malaya.

Mohd Izzat Afiq, Ghazali (2018) Sustainability in Malaysian heritage building conservation: integration of sustainability principle through the heritage legislation and policy / Mohd Izzat Afiq Ghazali. Masters thesis, University of Malaya.

Mohd Jamil , Abdul Wahab (2013) Strength assessment of structural size Malaysian timbers / Mohd Jamil Abdul Wahab. Masters thesis, University of Malaya.

Mohd Khalit, Othman (2016) Pembangunan model penerimaan dan penggunaan e-khidmat Awam berdasarkan utaut / Mohd Khalit Othman. PhD thesis, University of Malaya.

Mohd Nasrul Hakim , Jalaludin (2004) Leave Approval System (LAS) / Mohd Nasrul Hakim Jalaludin. Undergraduates thesis, University of Malaya.

Mohd Nizam, Mohd Noh (2001) Sistem jadual waktu elektronik (SJWE) / Mohd Nizam Mohd Noh. Undergraduates thesis, University of Malaya.

Mohd Noorshahril, Yaakob (2013) Design and development of automatic NGV natural gas vehicle refuelling robot / Mohd Noorshahril Yaakob. Masters thesis, University of Malaya.

Mohd Rasdan , Ibrahim (2018) The effect of crumb rubber modification on the physical properties of porous asphalt / Mohd Rasdan Ibrahim. PhD thesis, University of Malaya.

Mohd Razilan, Abdul Kadir (2013) An assessment of the performance of digital libraries based on an information systems impact model / Mohd Razilan Abdul Kadir. PhD thesis, University of Malaya.

Mohd Redzuan, Ramli (2015) Combined chlorination and nanofiltration to enhance removal efficiencies of sulphonamide in simulated wastewater / Mohd Redzuan Ramli. Masters thesis, University of Malaya.

Mohd Sayuti , Ab Karim (2013) Application of nano base lubricants in machining process for performance improvements / Mohd Sayuti Ab Karim. PhD thesis, University of Malaya.

Mohd Shahadan, Mohd Suan (2015) Synthesis and characterizations of YBa2Cu3O7-5 superconductor with added AI2O3 nanoparticles via citrate-nitrate auto-combustion reaction / Mohd Shahadan Mohd Suan. PhD thesis, University of Malaya.

Mohd Shahman , Samsul Ambia (2002) Password authentication using biometric function (voice/speaker recognition) / Mohd Shahman Samsul Ambia. Undergraduates thesis, University of Malaya.

Mohd Suffian, Ab Razak (2018) Dynamic analysis of automotive carbon fiber strut bar / Mohd Suffian Ab Razak. Masters thesis, University of Malaya.

Mohd Syukri, Ali (2013) Short distance and average absolute distance with wavelet transform for the high impedance fault location in the 11KV distribution underground system / Mohd Syukri Ali. Masters thesis, University of Malaya.

Mohd Syukri , Ali (2018) High impedance fault detection and localization in 11kV distribution system / Mohd Syukri Ali. PhD thesis, University of Malaya.

Mohd Yazed, Ahmad (2006) A distributed fuzzy logic controller for a prosthetic hand / Mohd Yazed Ahmad. Masters thesis, Universiti of Malaya.

Mohd Zubir, Md Idris (2017) Performance evaluation of copper brazing using CU-NI-SN-P filler metal / Mohd Zubir Md Idris. Masters thesis, University of Malaya.

Mohd. Azmi, Mustafa @ Sulaiman (2004) Komunikasi Suara Melalui Protokol Internet(VoIP) / Mohd. Azmi Mustafa @ Sulaiman. Undergraduates thesis, University of Malaya.

Mohd. Mostafizur, Rahman (2015) Thermophysical properties of methanol based nanofluids / Mohd. Mostafizur Rahman. Masters thesis, University of Malaya.

Mohsen, Kobraei (2012) A comparative study between CFRP and steel shear reinforcement bar in self compacting reinforced concrete beams / Mohsen Kobraei. Masters thesis, University of Malaya.

Mohsen, Mesbah (2013) Producing ultra fine grain pure aluminum tubes using tubular channel angular pressing (TCAP) / Mohsen Mesbah. Masters thesis, University of Malaya.

Moinuddin, Mohammed Quazi (2016) Development of wear resistant metal matrix composite coatings based on laser surfacing engineering technique / Moinuddin Mohammed Quazi. PhD thesis, University of Malaya.

Monowar, Hossain (2017) Techno-economic evaluation of off-grid hybrid renewable energy system for rural resort electrification in Malaysia / Monowar Hossain. Masters thesis, University of Malaya.

Mook, Wei Tze (2014) Simultaneous removal of organic matter and nitrate from aqueous solutions using a bio-electrochemical reactor / Mook Wei Tze. Masters thesis, University of Malaya.

Morshed , Alam (2014) Computer integrated design and manufacturing of patient specific lower limb orthoses through 3D reconstruction / Morshed Alam. Masters thesis, University of Malaya.

Mosleh, Mogeeb Ahmed Ahmed (2013) Digital note taking tool using a mediation approach / Mogeeb Ahmed Ahmed Mosleh. PhD thesis, University of Malaya.

Mostafa, Modiri Delshad (2016) Backtracking search algorithm for optimal power dispatch in power system / Mostafa Modiri Delshad. PhD thesis, University of Malaya.

Mostafa, Mohammadnejad (2012) Development and impact of fuel economy standards and labels for light duty vehicles in Iran / Mostafa Mohammadnejad. Masters thesis, University of Malaya.

Mostafalou, Yousef (2016) Oppositional politics and the internet in Iran: a visual semiotic analysis of Iranian green movement‘s websites / Yousef Mostafalou. PhD thesis, University of Malaya.

Mubarak , Mujawar (2015) Synthesis and characterization of multiwall carbon nanotubes using microwave heating for removal of heavy metals / Mubarak Mujawar. PhD thesis, University of Malaya.

Mubeenah Titilona , Sanni (2017) Design and development of an electromygraphy (EMG) based active elbow orthosis with feedback control / Mubeenah Titilona Sanni. Masters thesis, University of Malaya.

Mueller, Andre Matthias (2016) Promoting exercise among older Malaysians using text messages / Andre Matthias Mueller. PhD thesis, University of Malaya.

Muhamad Burhan Shah, Sabran (2016) Pulse generation in erbium-doped fiber laser using a passive technique / Muhamad Burhan Shah Sabran. Masters thesis, University of Malaya.

Muhammad, Awais (2017) Multiple tuning curve based wideband rc vco design / Muhammad Awais. Masters thesis, University of Malaya.

Muhammad, Jamaluddin (2017) Workstation design and analysis on student working in electrical wiring lab at Politeknik Tuanku Syed Sirajuddin / Muhammad Jamaluddin. Masters thesis, University of Malaya.

Muhammad, Rasmuna Mazwan (2011) Peranan institusi keagamaan dan Institusi Pengajian Tinggi Awam (IPTA) dalam menganalisis isu bioetika : ke arah pembentukan panduan kapada pengguna bioteknologi di Malaysia / Rasmuna Mazwan Muhammad. Masters thesis, University of Malaya.

Muhammad , Aamir (2016) Design of a non-isolated single phase online ups topology with parallel battery bank for low power applications / Muhammad Aamir. PhD thesis, University of Malaya.

Muhammad , Abdul Rahman (2013) Implementation of permanent magnet synchronous motor drives system suitable for air-conditioner application / Muhammad Abdul Rahman. Masters thesis, University of Malaya.

Muhammad , Abdur Rehman (2016) Magnetic nano-adsorbents applications and modelling for green environmental remediations / Muhammad Abdur Rehman. PhD thesis, University of Malaya.

Muhammad , Mahmood Ali (2016) Fabrication and characterization of few-mode fiber bragg gratings for mode conversion and sensing applications / Muhammad Mahmood Ali. PhD thesis, University of Malaya.

Muhammad Afdhaluddin, Muhammad Adib (2018) Workplace stress and musculoskeletal disorder: the relative roles of psychosocial and physical risk factors / Muhammad Afdhaluddin Muhammad Adib. Masters thesis, University of Malaya.

Muhammad Ahsan, Qureshi (2016) Adaptive radio propagation model for modern road infrastructure units in Vehicular Ad Hoc networks / Muhammad Ahsan Qureshi. PhD thesis, University of Malaya.

Muhammad Akmal , Kamarudin (2013) Fabrication and characterization of dye-sensitized solar cells incorporating polymer electrolyte liquid crystal system / Muhammad Akmal Kamarudin. Masters thesis, University of Malaya.

Muhammad Azfar , Rosli (2018) Health risk assessment of brachytherapy service engineers at the selected nuclear medicine centres / Muhammad Azfar Rosli. Masters thesis, University of Malaya.

Muhammad Faisal , Siddiqui (2016) Magnetic resonance imaging sense reconstruction system using FPGA / Muhammad Faisal Siddiqui. PhD thesis, University of Malaya.

Muhammad Fareq , Ibrahim (2018) Design and optimization of mems accelerometer sensor for lower limb exoskeleton application / Muhammad Fareq Ibrahim. Masters thesis, University of Malaya.

Muhammad Firdaus , Othman (2013) Feasibility study of TiO[2] intermediate coating layer for adhesive strength improvement / Muhammad Firdaus Othman. Masters thesis, University of Malaya.

Muhammad Hanif , Ahmad Nizar (2017) Pattern recognition of heart valve in echocardiogram using convolutional neural network / Muhammad Hanif Ahmad Nizar. Masters thesis, University of Malaya.

Muhammad Hassan, Rehman (2018) Optimization of MEMS piezo-electric sensor for smart textile application / Muhammad Hassan Rehman. Masters thesis, University of Malaya.

Muhammad Hazrie , Ibrahim (2017) Smart manufacturing: its challenge and future implementation in Malaysia /Muhammad Hazrie Ibrahim. Masters thesis, University of Malaya.

Muhammad Heikal, Hasan (2013) Analysis of electricity generation and clean coal technology development as greenhouse gas control strategy in Indonesia / Muhammad Heikal Hasan. Masters thesis, University of Malaya.

Muhammad Izwan, Idris (2005) LAN monitoring and management tool (LMMT) / Muhammad Izwan Idris. Undergraduates thesis, University of Malaya.

Muhammad Mukhlesur, Rahman (2012) Application of carbon fiber reinforced polymer laminate for strengthening reinforced concrete T-beam /Muhammad Mukhlesur Rahman. Masters thesis, University of Malaya.

Muhammad Rusydan , Amir Hamzah (2012) Prediction of rupture analysis and hemodynamic factors on abdominal aortic aneurysm for normal and high blood pressure subjects / Muhammad Rusydan Amir Hamzah. Masters thesis, University of Malaya.

Muhammad Syamsuzzaman, Shamsuddin (2013) Investigation of the effect of layer thickness and infill material percentage on the performance of low-cost and commercial fused deposition modelling / Muhammad Syamsuzzaman Shamsuddin. Masters thesis, University of Malaya.

Muhammad Zubair Khan, - (2016) Studies of x-ray and electron beam emissions from a low energy plasma focus / Muhammad Zubair Khan. PhD thesis, University of Malaya.

Muhammad Zulkifli, Abd Hamid (2018) Transformer design optimization using nested loop / Muhammad Zulkifli Abd Hamid. Masters thesis, University of Malaya.

Muhammed Nuur Azam, Mohd Yasin (2004) Penaakulan berasaskan kes untuk pakej video kamera / Muhammed Nuur Azam Mohd Yasin. Undergraduates thesis, University of Malaya.

Muhsin , Abdul Mohammed (2018) Pattern classification of human interactions from videos / Muhsin Abdul Mohammed. Masters thesis, University of Malaya.

Mukhtar , Fatihu Hamza (2017) Design of type-2 fuzzy logic controllers using meta-heuristic optimization algorithms for rotary inverted pendulum / Mukhtar Fatihu Hamza. PhD thesis, University of Malaya.

Mukhtar A. Kareem, Aljadri (2013) Novel deep eutectic solvents and their application in the liquid-liquid extraction of aromatic compounds / Mukhtar A. Kareem Aljadri. PhD thesis, University of Malaya.

Mumuney Nurullahi , Lekan (2018) Optimization of load frequency control permancein two-area power system with PID controller using ICA and GSA algorithms / Mumuney Nurullahi Lekan. Masters thesis, University of Malaya.

Mun, Peck Shen (2016) Measurement and classification of urinary dielectric properties for type 2 diabetes mellitus and chronic kidney disease / Mun Peck Shen. PhD thesis, University of Malaya.

Muna, Hassan Ahmed Ibrahim (2016) Investigating the stability of superoxide ion generated in ionic liquids and the conversion of sulfur compounds / Muna Hassan Ahmed Ibrahim. Masters thesis, University of Malaya.

Mursyidah, Mohamed Yunus (2001) Siri ibadah puasa elektronik (SIPE) / Mursyidah Mohamed Yunus. Undergraduates thesis, University of Malaya.

Mushtaq, Ahmad (2016) Two-step synthesis of nano heterometallic catalysts for water treatment and biogasoline production / Mushtaq Ahmad. PhD thesis, University of Malaya.

Mustapha Kamil Husen , Abdul Kadir (2017) Girder deflection for lifting load / Mustapha Kamil Husen Abdul Kadir. Masters thesis, University of Malaya.

N

Nadhirah , Mohd Khaidir (2012) Development of heat feedback parameter of muscle activation detection in functional electrical stimulation / Nadhirah Mohd Khaidir. Masters thesis, University of Malaya.

Nadia, Yussof (2003) Laman web kanser servikal / Nadia Yussof. Undergraduates thesis, University of Malaya.

Nadia Hazwani, Mohd Nasir (2018) A study on fouling during harvesting of Chlorella vulgaris using microfiltration / Nadia Hazwani Mohd Nasir. Masters thesis, Universiti Malaya.

Nahdatul Aishah, Mohd Sharif (2017) Biomechanical effects of different knee sleeves on early unilateral knee osteoarthritis in 6 weeks intervention / Nahdatul Aishah Mohd Sharif. Masters thesis, University of Malaya.

Nahrizul Adib, Kadri (2010) Development of near real-time assessment system for cancer cells / Nahrizul Adib Kadri. PhD thesis, University of Malaya.

Naji, Sinan A. (2013) Human face detection from colour images based on multi-skin models, rule-based geometrical knowledge, and artificial neural network / Sinan A. Naji. PhD thesis, University of Malaya.

Naoki, Masuyama (2016) Quantum-inspired associative memories for incorporating emotion in a humanoid/ Naoki Masuyama. PhD thesis, University of Malaya.

Nardia , Zubir (2012) Analysis on the future energy demand in Malaysia / Nardia Zubir. Masters thesis, Universiti Malaya.

Nasim Sarrafi, Aghdam (2018) Earthquake site response analyses for soil conditions of several cities in Malaysia / Nasim Sarrafi Aghdam. Masters thesis, University of Malaya.

Nasser, Mohamed Ramli (2015) Development of neural network based models to control temperature and estimate composition of a debutaniser column / Nasser Mohamed Ramli. PhD thesis, University of Malaya.

Natasha, Khalil (2016) Incorporating risk mitigation into building performance rating tools (BPRTs) for Malaysia’s Higher Education Building / Natasha Khalil. PhD thesis, University of Malaya.

Navin, Ramasamy (2012) Study on the FAME oxidation and thermal stability of biodiesel / Navin Ramasamy. Masters thesis, University of Malaya.

Navin Raja , Kuppusamy (2016) Thermal enhancement in a microchannel heat sink using passive methods / Navin Raja Kuppusamy. PhD thesis, University of Malaya.

Nawal Mohamed, A. Mohamed (2016) A study on the visual effects in the movie Avengers: Age of Ultron / Nawal Mohamed A. Mohamed. Masters thesis, University of Malaya.

Nazihah, Ahmad (2012) Effect of leech therapy on body composition parameters / Nazihah Ahmad. Masters thesis, University of Malaya.

Newsha , Abdollahi Chahkand (2013) Investigation on torsional behaviour of CFRP strengthened square hollow steel section / Newsha Abdollahi Chahkand. Masters thesis, University of Malaya.

Ng, Chee Guan (2016) Implementation of environmental life cycle assessment model in organic municipal solid waste management in Malaysia / Ng Chee Guan. PhD thesis, University of Malaya.

Ng, Huey Zher (2016) Strategies on sustaining feedback in a technology integrated learning environment (tile) / Ng Huey Zher. PhD thesis, University of Malaya.

Ng, Siew Cheok (2003) Changes in the electroencephalogram MU rhythm during hand movements / Ng Siew Cheok. Masters thesis, University of Malaya.

Ng, Yee Sern (2016) Electrokinetic process in soil remediation for lead removal / Ng Yee Sern. PhD thesis, University of Malaya.

Ng , Heang Tong (2004) Program for PDA educational organizer / Ng Heang Tong. Undergraduates thesis, University of Malaya.

Ngo, Chee Guan (2014) Automated landmarks detection on 3d human facial image / Ngo Chee Guan. Masters thesis, University of Malaya.

Nguyen, Thanh Sang (2017) Passivity-based multivariable control for the stabilization of continuous styrene polymerization reactor / Nguyen Thanh Sang. Masters thesis, University of Malaya.

Nima , Kazemi (2017) The effect of human learning and forgetting on fuzzy EOQ model with backorders / Nima Kazemi. PhD thesis, University of Malaya.

Nissar, Mohammad Karim (2015) Negative bias temperature instability and permittivity dependent delay mitigation in High-K metal oxide compatible cmos dielectric / Nissar Mohammad Karim. PhD thesis, University of Malaya.

Noor Ashikin , Mohd Rashid (2012) Evaluation of field and flux distribution for electrical steels under unidirectional magnetization / Noor Ashikin Mohd Rashid. Masters thesis, University of Malaya.

Noor Azimah, Talib (2000) Sistem perpustakaan maya (pengkhususan kertas-kertas teknikal) / Noor Azimah Talib. Undergraduates thesis, University of Malaya.

Noor Dina , Ghazali (2013) Energy efficiency standards and labels for electric rice cookers in Malaysia / Noor Dina Ghazali. Masters thesis, University of Malaya.

Noor Fadzilah , Razali (2014) Speaker verification using neural responses from the model of the auditory system / Noor Fadzilah Razali. Masters thesis, University of Malaya.

Noor Farah Hani , Amir (2017) Carbon footprint reduction for clinical waste management using cleaner production strategies at a selected Hospital / Noor Farah Hani Amir. Masters thesis, University of Malaya.

Noor Farahain, Muhammad Amin (2017) Development of flood hazard map for Johor river basin / Noor Farahain Muhammad Amin. Masters thesis, University of Malaya..

Noor Farisya, Azahar (2017) Study of technology acceptance of computerized maintenance management systems (CMMS) as a tool for measuring contractor's performance: a case study of public work department, Putrajaya / Noor Farisya Azahar. Masters thesis, University of Malaya.

Noor Hasniza, Mat Salleh (2017) Kajian elemen penilaian prestasi bangunan bagi menilai premis Institusi Pendidikan Tinggi Swasta (IPTS) ke arah menambah baik kualiti bangunan pendidkan tinggi / Noor Hasniza Mat Salleh. Masters thesis, University of Malaya.

Noor Hasrina, Bakar (2016) Feature extraction from natural language to aid requirements reuse in software product lines engineering / Noor Hasrina Bakar. PhD thesis, University of Malaya.

Noor Hidayah, Amir Hassan (2012) Improvement of the processing of initial and final conditions of particles undergoing DEP effects in homogenous suspension using MATLAB / Noor Hidayah Amir Hassan. Masters thesis, University of Malaya.

Noor Maizatulshima, Muhammad Sabri (2004) Packet Filtering Enhancement - Iptables / Noor Maizatulshima Muhammad Sabri. Undergraduates thesis, University of Malaya.

Noor Zafirah , Abu Bakar (2013) Fuel savings and cost reduction of start-stop technology for an internal combustion engine / Noor Zafirah Abu Bakar. Masters thesis, University of Malaya.

Nooranida, Arifin (2016) The influence of prosthetic foot types and altered sensory conditions on the postural stability of below-knee amputees during upright standing / Nooranida Arifin. PhD thesis, University of Malaya.

Noorsaiyyidah, Darman Singho (2013) Synthesis and characterizations of silver/polymethylmethacrylate nanocomposites via in-situ technique / Noorsaiyyidah Darman Singho. Masters thesis, University of Malaya.

Nooshin, Jabbari (2015) Development and application of technical and economic strategies in upgrading heavy oil: the case of Iran / Nooshin Jabbari. PhD thesis, University of Malaya.

Nor Adzliana , Sajahan (2017) Synthesis and characterization of hydroxyapatite from waste materials / Nor Adzliana Sajahan. Masters thesis, University of Malaya.

Nor Aliza, Mohd Amin (2001) Sistem buku resipi bermultimedia smartcook / Nor Aliza Mohd Amin. Undergraduates thesis, University of Malaya.

Nor Azlina, Ab. Aziz (2017) An adaptively switching iteration strategy for population based metaheuristics / Nor Azlina Ab. Aziz. PhD thesis, University of Malaya.

Nor Azlina, Nasrudin (2002) Pakej E-Learning UPSR Matematik / Nor Azlina Nasrudin. Undergraduates thesis, University of Malaya.

Nor Elleeiana, Mohd Syah (2013) Identification of gait disparity using gait analysis and cyclograms: application for prosthetic knee control / Nor Elleeiana Mohd Syah. Masters thesis, University of Malaya.

Nor Hidayahti , Hasan @ Aminuddin (2013) Analysis of entropy generation in micro-mini channel operated with nanofluids for turbulent flow / Nor Hidayahti Hasan @ Aminuddin. Masters thesis, University of Malaya.

Nor Taibah, Taazim (2016) Development of titanium diboride layer through superplastic compression method /Nor Taibah Taazim. Masters thesis, University of Malaya.

Nor Zaini Ikrom, Zakaria (2006) Thermal design of roof: A case study of PWD new quarters design, Malaysia / Nor Zaini Ikrom Zakaria. PhD thesis, University of Malaya.

Nor'ain, Mohd Yusoff (2015) A shared cognitive user task framework for elearning storyboard / Nor'ain binti Mohd Yusoff. PhD thesis, University of Malaya.

Noraini, Ajit (2012) Steel connection behaviour in frame and floor system at elevated temperature /Noraini Ajit. Masters thesis, University of Malaya.

Noraini, Idris (2013) Determination of heliostat normal using MATLAB / Noraini Idris. Masters thesis, University of Malaya.

Noratika, Mohd Zin (2017) Noise reduction techniques for partial discharge classification in XPLE cable joint / Noratika Mohd Zin. Masters thesis, University of Malaya.

Norazian, Abd Razak (2010) Evaluation of lumbosacral orthosis in flexion and extension movements of lumbar spine / Norazian Abd Razak. Masters thesis, University of Malaya.

Norazlena, Mamat (2001) Sistem Maklumat Tuntutan Elaun / Norazlena Mamat. Undergraduates thesis, Universiti Of Malaya.

Norazliani , Md Sapari (2018) Load shedding scheme based on frequency and ranked stability index considering optimal selectivity of load in islanded distribution system / Norazliani Md Sapari. PhD thesis, University of Malaya.

Norazlina, Saidin (2015) Development of thulium-doped and co-doped fiber lasers for 1.9 micron region operation / Norazlina Saidin. PhD thesis, University of Malaya.

Nordiana, Maideen (2001) Sistem perancangan akademik (SPA) / Nordiana Maideen. Undergraduates thesis, University of Malaya.

Noreena, Nordin (2017) Material flow cost accounting for a traditional cottage industry: Batik / Noreena Nordin. Masters thesis, University of Malaya.

Norfazila, Mohd Sultan (2013) Synthesis and optical characterization of chitosan capped gold nanoparticles via chemical reduction technique / Norfazila Mohd Sultan. Masters thesis, University of Malaya.

Norhidayah, Haji Nor Hassan (2018) Energy discharge capability of surge arrester for 132 kV double circuit transmission line in Malaysia / Nor Hidayah Haji Nor Hassan. Masters thesis, Universiti Malaya.

Norhidayah, Nazari (2018) Awareness workplace hazards in selected university's staff / Norhidayah Nazari. Masters thesis, University of Malaya.

Norhuda, Hamzah (2018) Analysis of inrush current impacts towards transformer protection capability / Norhuda Hamzah. Masters thesis, University of Malaya.

Norita Adila, Mustafa (2001) VHDL implementation for jawi character recognition / Norita Adila Mustafa. Undergraduates thesis, University of Malaya.

Norjannah, Basan (2017) Biodiesel production from ceiba pentandra oil using enzymatic reaction / Norjannah Basan. Masters thesis, University of Malaya.

Norlailah, Lanisa (2017) Digital infrared thermography analysis for breast cancer using image textures features / Norlailah Lanisa. Masters thesis, University of Malaya.

Norliyana, Zin Zawawi (2012) Life cycle assessment of greenhouse gases emission from nitrogen fertilizer application in palm oil industry / Norliyana Zin Zawawi. Masters thesis, University of Malaya.

Normaliza, Latip (2003) Portal untuk orang pekak: Ruangan forum, informasi, berita dan pekerjaan / Normaliza Latip. Undergraduates thesis, Universiti of Malaya.

Norman, Azah Anir (2014) Information systems security management maturity model for electronic commerce small medium industries and enterprises (smi/e) using technology, organization and environment framework / Azah Anir Binti Norman. PhD thesis, University Malaya.

Norsiah, Mohamad (2012) A framework of factors to improve ethics in the Malaysian construction industry / Norsiah Mohamad. PhD thesis, University of Malaya.

Norsuhana, Azman (2003) Multimedia package: Learning how to program in C, plus interactive tutorial / Norsuhana Azman. Undergraduates thesis, University of Malaya.

Nuha S., Mashaan (2012) The effect of crumb rubber modifier to the properties and rheological behaviour of asphalt binder / Nuha S. Mashaan. Masters thesis, University of Malaya.

Nur Afifah Auni , Mohd Nasir (2017) Optimal recloser placement for improving distribution system reliability using particle swarm optimization / Nur Afifah Auni Mohd Nasir. Masters thesis, University of Malaya.

Nur Afiqah , Hashim (2017) Development of prosthetic terminal device with sensory feedback / Nur Afiqah Hashim. Masters thesis, University of Malaya.

Nur Ain Sabrina, Manssor (2014) Biomechanical properties of expanded sheep skin / Nur Ain Sabrina Manssor. Masters thesis, University of Malaya.

Nur Amanina , Zainal (2017) Anthropometric measurement for disable students / Nur Amanina Zainal. Masters thesis, University of Malaya.

Nur Aqilah, Derahman (2018) The effects of energy density on the mechanical properties of SS316L produced by selective laser melting / Nur Aqilah Derahman. Masters thesis, Universiti Malaya.

Nur Azimah , Abd Samad (2016) TiO2 – ZnO nano composite films in solar driven water splitting performance / Nur Azimah Abd Samad. Masters thesis, University of Malaya.

Nur Damia , Mohd Ismail (2013) Preparation of biomineral filler and its application as biopolymer composite filler / Nur Damia Mohd Ismail. Masters thesis, University of Malaya.

Nur Fadzilah, Mohamad Radzi (2013) Collision avoidance algorithm design for UAV base on parametric theorem and circle overlapping method / Nur Fadzilah Mohamad Radzi. Masters thesis, University of Malaya.

Nur Farhanah , Zulkipli (2017) Generation of Q-Switching pulse train with topology insulators / Nur Farhanah Zulkipli. Masters thesis, University of Malaya.

Nur Izzati , Aminuddin (2012) Characterization of electrospun hydroxyapatite and polycaprolactone composite scaffold / Nur Izzati Aminuddin. Masters thesis, University of Malaya.

Nur Salwa , Abdul Rasid (2018) Design of experiment approach in municipal wastewater treatment through adsorption of activated carbon / Nur Salwa Abdul Rasid. Masters thesis, University of Malaya.

Nur Yusrina , Abdullah (2013) Macro-ergonomics and musculoskeletal disorders (MSD) in multinational company / Nur Yusrina Abdullah. Masters thesis, University of Malaya.

Nuradhiathy, Abd Razak (2016) Survival modelling, missing values and frailty with application to cervical cancer data / Nuradhiathy Abd Razak. PhD thesis, University of Malaya.

Nurainil, Mohd Mustapa (2003) Tools for Jawi Character Recognition / Nurainil Mohd Mustapa. Undergraduates thesis, University of Malaya.

Nurasyeera , Rohaizat (2018) Flapping wing mechanism development and control / Nurasyeera Rohaizat. Masters thesis, University of Malaya.

Nurehan Syamimi, Ismail (2012) Tribology study on nanosilica-filled polyurethane (PU) composite coating on polypropylene substrate / Nurehan Syamimi Ismail. Masters thesis, Universiti Malaya.

Nurul Afiqah , Mohd Zaki (2016) Extraction and deproteination of extracted silk fibers from silk cocoon and development of hydrophilic electrospun silk fibers / Nurul Afiqah Mohd Zaki. Masters thesis, University of Malaya.

Nurul Ataillah , Abdul Rahim (2013) Electrical and thermal performance evaluation of solar Photovoltaic/Thermal (PV/T) air system / Nurul Ataillah Abdul Rahim. Masters thesis, University of Malaya.

Nurul Athirah, Abu Hussein (2018) Synthesis and characterization of maghemite nanoparticles deposited on silicon substrate / Nurul Athirah Abu Hussein. Masters thesis, Universiti Malaya.

Nurul Azri Khalisah , Aznan (2016) Synthesis and characterization of silver nanowires via polyol process /Nurul Azri Khalisah Aznan. Masters thesis, University of Malaya.

Nurul Hidayah, Keria (2018) Cultural dimension as an influencer factor on work statisfaction / Nurul Hazirah Keria. Masters thesis, University of Malaya.

Nurul Huda, Baharuddin (2015) Removal of heavy metal ions from aqueous solutions by polymer-enhanced ultrafiltration / Nurul Huda Baharuddin. PhD thesis, University of Malaya.

Nurul Huda, Mat Tahir (2013) Adaptive resource allocation scheme for uplinks in IEEE 802.16m systems / Nurul Huda Mat Tahir. Masters thesis, University of Malaya.

Nurul Huda , Muhamad (2003) Sistem Pakar Diet & Nutrisi / Nurul Huda Muhamad. Undergraduates thesis, University of Malaya.

Nurul Izzah, Abd Rahman (2013) Train drivers mental workload and alertness under simulated conditions based on electroencephalogram signals / Nurul Izzah Abd Rahman. Masters thesis, University of Malaya.

Nurul Izzati , Mohamad (2017) Safety, health & environmental hazard identification and risk assessment on warehouse racking installation site / Nurul Izzati Mohamad. Masters thesis, University of Malaya.

Nurul Maisarah, Kamaruddin (2014) Development and testing of patient communication board / Nurul Maisarah Kamaruddin. Masters thesis, University of Malaya.

Nurul Shuhadah, Mazlan (2018) Steel toe cap boot usage and the prevalence to plantar fasciitis among industrial workers / Nurul Syuhada Binti Mazlan. Masters thesis, University of Malaya.

Nurul Zieyana , Mohamed Annuar (2013) Modeling and simulation of metal organic halide vapor phase epitaxy growth chamber reactor / Nurul Zieyana Mohamed Annuar. Masters thesis, University of Malaya.

Nurulain, Mustakim (2003) Sistem pakar bunga orkid (pakar orkid) / Nurulain Mustakim. Undergraduates thesis, University of Malaya.

Nurulnisa , Nor Azman (2012) The effects of dialysis on body bioimpedance / Nurulnisa Nor Azman. Masters thesis, University of Malaya.

Nusrat Khan, Bintu (2017) Q-switched and mode-locked erbium-doped fiber laser with Co-ZnO saturable absorber / Nusrat Khan Bintu. Masters thesis, University of Malaya.

O

Odeta , Prosper (2013) Reduction of CO[2] emission in Malaysia transport industry using compressed natural gas as alternative fuel / Odeta Prosper. Masters thesis, University of Malaya.

Oii, Chin Hui (2018) Risk assessment of selected wastewater treatment plant in Klang Valley / Ooi Chin Hui. Masters thesis, University of Malaya.

Omar, Almubaied (2017) Corrosion process monitoring of reinforced concrete structure using fiber bragg grating (FBG) strain sensor / Omar Almubaied. Masters thesis, University of Malaya.

Omar Riyadh , Khaleel (2013) The effect of aggregate and mineral admixtures on engineering properties of high strength self compacting concrete / Omar Riyadh Khaleel. PhD thesis, University of Malaya.

Omid, Kahbasi (2013) Swelling of elastomers due to simulataneous diffusion of biodiesel and multi-axial large strain / Omid Kahbasi. Masters thesis, University of Malaya.

Omid , Afshar (2013) Thermodynamics performance and heat transfer analysis of parabolic trough collector in solar power plant / Omid Afshar. Masters thesis, University of Malaya.

Ong, Hui San (2016) Computational methods for self-assembly of DNA nanostructures / Ong Hui San. PhD thesis, University of Malaya.

Ong, Sim Ying (2015) Data insertion and scrambling for unified scalable information hiding / Ong Sim Ying. PhD thesis, University of Malaya.

Onn , Cheen Sean (2013) A computational simulation of heat transfer to turbulent flow separation using nano fluid in a concentric pipe / Onn Cheen Sean. Masters thesis, University of Malaya.

Ooi , Hui Lee (2014) Noninvasive detection of physiologically significant pumping states in an implantable rotary blood pump / Ooi Hui Lee. Masters thesis, University of Malaya.

Oon , Cheen Sean (2017) Non-invasive electromagnetic wave sensor for flow measurement and biphase application / Oon Cheen Sean. PhD thesis, University of Malaya.

Osamah Jasim, Madhloom (2017) Image restoration techniques in spatial domain and frequency domains / Osamah Jasim Madhloom. Masters thesis, University of Malaya.

P

Pan, Kok Chen (2012) The design and testing of a power augmented wind turbine system for urban high rise application / Pan Kok Chen. Masters thesis, Universiti Malaya.

Pardon, Munawar (2001) Pengkalan web senarai nama pengarang melayu penama / Pardon Munawar. Undergraduates thesis, University of Malaya.

Parviz, Mohammadi (2012) Biohydrogen production from Palm Oil Mill Effluent (POME) in an anaerobic hybrid bioreactor / Parviz Mohammadi. PhD thesis, University of Malaya.

Paveethra, Thegarathah (2017) Safety level assessment at selected Malaysian Schools / Paveethra Thegarathah. Masters thesis, University of Malaya.

Penafort, Frances Mary (2011) Exploring the efficacy of integrated pest management technology and innovation diffusion in Malaysia : a case study approach / Frances Mary Penafort. PhD thesis, University of Malaya.

Peyman, Jahanshahi (2015) Dengue rapid diagnostic via surface plasmon resonance biosensor / Peyman Jahanshahi. PhD thesis, University of Malaya.

Phan, Choon Kit (2018) Enhancement of the design of air-conditioning heat exchangers circuits / Phan Choon Kit. Masters thesis, University of Malaya.

Phang, Yoke Mun (2006) Development of an electroencephalogram (EEG) amplifier for a brain-computer interface (BCI) / Phang Yoke Mun. Masters thesis, University of Malaya.

Phiyadharshini, Thirumalai (2001) To explore agent technology in e-commerce mighty house agent / Phiyadharshini Thirumalai. Undergraduates thesis, University of Malaya.

Phoon , Sin Ye (2018) Modelling and simulation of spine layout design for flexible manufacturing system in digital factory platform / Phoon Sin Ye. Masters thesis, Universiti Malaya.

Phuah, Kok Sun (2012) Case study of indoor air quality of health care facilities and hospitals in Malaysia / Phuah Kok Sun. Masters thesis, University of Malaya.

Poh, Kai Sin (2017) A comprehensive performance investigation of an under-floor air distribution system in the tropics / Poh Kai Sin. Masters thesis, University of Malaya.

Poon, Chi Tat (2013) Effect of herbal extract on rat bone marrow stromal derived osteoblast growth and differentiation in vitro / Poon Chi Tat. Masters thesis, University of Malaya.

Pooyan Alinaghi, Hosseinabadi (2018) Finite time control of remotely operated vehicle / Pooyan Alinaghi Hosseinabadi. Masters thesis, University of Malaya.

Por, Lip Yee (2012) Mitigation of shoulder-surfing attack on picture-based passwords using falsifying authentication methods / Por Lip Yee. PhD thesis, University of Malaya.

Praven, Rajendran (2017) Control of an active magnetic bearing system using pso-based tuning pid controller / Praven Rajendran. Masters thesis, University of Malaya.

Premdass, Deva Ray (2018) Study the corrosion behaviour of aluminium alloy 5052 in Croton Megalocarplus and Coconut Biodiesel / Premdass Deva Ray. Masters thesis, University of Malaya.

Puteri Nur Farhana, Hamdan (2017) The effect of ankle-foot orthoses constrained movements on power output during functional electrical stimulation cycling in paraplegics / Puteri Nur Farhana Hamdan. Masters thesis, University of Malaya.

Putri Nor Liyana , Mohamad Radzi (2017) Study on the impact of renewable energy for rural development in Malaysia / Putri Nor Liyana Mohamad Radzi. Masters thesis, University of Malaya.

Putri Zulaiha, Razi (2014) Environmental sustainability and engineering performance of OPC-fly ash mortar mixes with different workability / Putri Zulaiha Razi. Masters thesis, University of Malaya.

Q

Qamar Fairuz , Zahmani (2018) Validation of thermal enhancement in micro channel heat using numerical analysis / Qamar Fairuz Zahmani. Masters thesis, University of Malaya.

R

Rad, Sadri (2013) Study on thermophysical properties of fluids containing carbon nanotubes / Rad Sadri. Masters thesis, University of Malaya.

Radziah, Ab. Hamid (2001) Pakej pembelajaran matematik UPSR (M3UPSR) / Radziah Ab. Hamid. Undergraduates thesis, University of Malaya.

Rahman, Md. Mahfujur (2015) Development of canine biomarker based detection and quantification assays for determining food adulteration and halal authentication / Md. Mahfujur Rahman. PhD thesis, University of Malaya.

Raihana, Mohamad Fawzi (2012) Constitutive modeling of the stress-softening in swollen polychloroprene rubber under cyclic loading / Raihana Mohamad Fawzi. Masters thesis, Universiti Malaya.

Raja Nurul Hani, Raja Azhar (2017) Corrosion characteristics of aluminium alloys in calophyllum inophyllum blodiesel / Raja Nurul Hani Raja Azhar. Masters thesis, University of Malaya.

Rajeshree, Vejasegaran (2017) Design of array antenna for centric communication / Rajeshree Vejasegaran. Masters thesis, University of Malaya.

Ramin, Solouki Bonab (2013) Characterization of oil palm empty fruit fiber reinforced PVA / Ramin Solouki Bonab. Masters thesis, Universiti Malaya.

Ramli, Abd Rahman (2017) Implementation of cleaner production strategies for offset lithography printing industry / Ramli Abd Rahman. Masters thesis, University of Malaya.

Rasedul, Hasan (2017) Soft-switching active-clamp flyback microinverter for pv applications / Rasedul Hasan. Masters thesis, University of Malaya.

Rathinee, Balakumar (2015) Corrosion of phosphor bronze in different biodiesel blends / Rathinee Balakumar. Masters thesis, University of Malaya.

Ravi Kumar, Sharma (2016) Reliability testing and heat transfer enhancement of organic phase change materials / Ravi Kumar Sharma. PhD thesis, University of Malaya.

Reza, Mahmoodian (2013) Development of manufacturing techniques for Ti-based functionally graded coatings / Reza Mahmoodian. PhD thesis, University of Malaya.

Rifat, Ahmmed Aoni (2015) Modelling and simulation of surface plasmonic resonance in photonic crystal fiber / Rifat Ahmmed Aoni. Masters thesis, University of Malaya.

Rizal, Mohd Razman (2013) Critical parameters of the delivery in Ten Pin bowling / Rizal Mohd Razman. PhD thesis, University of Malaya.

Robiyanti, Adollah (2012) Improvement of dielectrophoretic data analysis algorithm in determining the relative polarisability of dielectric particles / Robiyanti Adollah. Masters thesis, Universiti of Malaya.

Rodney Petrus, Balandong (2013) Development of a closed loop functional electrical stimulation / Rodney Petrus Balandong. Masters thesis, University of Malaya.

Rohani, Mokhtar (2017) Behaviour of precast beam-to-column connections by using partly hidden corbel / Rohani Mokhtar. Masters thesis, University of Malaya.

Roozbeh , Hoseinzadeh Hesas (2014) Production and characterization of activated carbon from palm shell by using microwave heating method / Roozbeh Hoseinzadeh Hesas. PhD thesis, University of Malaya.

Roozbeh , Kardooni (2016) Renewable energy technology acceptance in Peninsular Malaysia / Roozbeh Kardooni. PhD thesis, University of Malaya.

Rosmawati, Mat Jihin (2013) Numerical study of heat transfer performance of suspension of nanofluids in heat exchanger tube / Rosmawati Mat Jihin. Masters thesis, University of Malaya.

Rosnaini, Saidan (2015) High temperature forming of boronized duplex stainless steel / Rosnaini Saidan. Masters thesis, University of Malaya.

Rozia Wati, Badrul (2003) Pre-Math / Rozia Wati Badrul. Undergraduates thesis, University of Malaya.

Roziana, Ramli (2014) Finite state machine and eog artifacts in eeg signals for wheelchair navigation / Roziana Ramli. Masters thesis, University of Malaya.

Rubentheren, Viyapuri (2013) Structural dynamic characterization of biobased micro aerial vehicles / Rubentheren Viyapuri. Masters thesis, University of Malaya.

Rushdan, Mamat (2002) Sistem jadual pusat asasi sains(SJWPAS)/ Rushdan Mamat. Undergraduates thesis, University of Malaya.

S

S. M. Showybul, Islam Shakib (2017) Zero-voltage switching bi-directional isolated LLC resonant DC/DC converter for wide voltage gain and load range / S.M. Showybul Islam Shakib. Masters thesis, University of Malaya.

Sa'adah , Ahmad @ Ahmad Sowi (2013) Role of thermo-physical properties of refrigerant on the thermal performance of a refrigeration system / Sa'adah Ahmad @ Ahmad Sowi. Masters thesis, University of Malaya.

Saad Jawaid , Khan (2018) Analysis of orthosis with biomechanical interventions and gait modifications for medial knee osteoarthritis patients / Saad Jawaid Khan. PhD thesis, University of Malaya.

Sadeeq, Ali (2015) Interface pressure between socket and residual limb in prosthesis with seal-in X5 and dermo liner during level ground, stairs, and ramp walking /Sadeeq Ali. PhD thesis, University of Malaya.

Sadek, Deboucha (2011) Engineering properties of compressed bricks based on stabilised peat soils / Sadek Deboucha. PhD thesis, University of Malaya.

Sadia, Rahman (2014) Experimental investigation on impacts of tsunami-induced forces on coastal structures / Sadia Rahman. Masters thesis, University of Malaya.

Saeed, Ahmed (2012) A study and comparison of bioimpedance parameters during foot massage reflexology using aroma oil / Saeed Ahmed. Masters thesis, University of Malaya.

Saeed, Barzabadi Farahani (2014) Developing fire detection system for chemical laboratories / Saeed Barzabadi Farahani. Masters thesis, University of Malaya.

Safa, Nader Sohrabi (2014) Modelling of multi-dimensional loyalty in electronic commerce / Nader Sohrabi Safa. PhD thesis, University Malaya.

Saif , Zeyad Mustafa (2011) Numerical study of helical savonius rotor in urban areas / Saif Zeyad Mustafa. Masters thesis, University of Malaya.

Sajjad, Hossain (2015) Influence of gas-to-liquid fuel in the combined blends of biodiesel-diesel / Sajjad Hossain. Masters thesis, University of Malaya.

Sajjad, Zargham (2012) Structural dynamic modification of vibrating structures using topology optimization / Sajjad Zargham. Masters thesis, University of Malaya.

Salimah , Mokhtar (2017) A techno-religious framework to scaffold spiritual intelligence among students / Salimah Mokhtar. PhD thesis, University of Malaya.

Salman Ahamed Khan , Jagirdar (2013) Convective heat transfer in square and cylindrical porous annulus / Salman Ahamed Khan Jagirdar. PhD thesis, University of Malaya.

Salveen Kaur Gill, Sakdev Singh (2015) A multimodal analysis of cover stories on mobile phones: An ideational perspective / Salveen Kaur Gill A/P Sakdev Singh. Masters thesis, University of Malaya.

Sam , Koohikamali (2015) Power management system for smart microgrid considering meteorological and load demand data / Sam Koohikamali. PhD thesis, University of Malaya.

Samu, Qhamariah (2012) Pembentukan model keberkesanan pengintegrasian teknologi dalam pengajaran dan pembelajaran di sekolah rendah Malaysia / Qhamariah Samu. PhD thesis, University of Malaya.

Sanaz, Shahla (2014) Synthesis and characterization of palm oil based surfactant by chemical transesterification / Sanaz Shahla. PhD thesis, University of Malaya.

Sanjid Ahmed , Patwary (2015) Experimental study of engine performance and emission of palm, mustard and calophyllum biodiesel blends in a diesel engine / Sanjid Ahmed Patwary. Masters thesis, University of Malaya.

Santhirasegaram, Vicknesha (2015) Effects of thermal and non-thermal processing on quality attributes of chokanan mango juice (Mangifera Indica L.) / Vicknesha a/p Santhirasegaram. PhD thesis, University of Malaya.

Sarfaraz , Kamangar (2016) Computational hemodynamic analysis of stenosed coronary artery / Sarfaraz Kamangar. PhD thesis, University of Malaya.

Sarfaraz , Kamangar (2013) Finite element analysis of heat transfer in the human head / Sarfaraz Kamangar. Masters thesis, University of Malaya.

Saritha, Paramasivam (2013) Evaluating Level of Service (LOS) for service coverage in Kuala Lumpur transit system using GIS / Saritha Paramasivam. Masters thesis, University of Malaya.

Satheeskumar , Rajadran (2017) To study the chiller plant room performance /Satheeskumar Rajadran. Masters thesis, University of Malaya.

Satiapriya, Sugumaran (2003) Sistem Pengurusan Kuliah / Satiapriya Sugumaran. Undergraduates thesis, University of Malaya.

Sayed Mojtaba, Tabibian (2017) Computational fluid dynamics simulation of exhaust ventilation and jet fan systems during a fire event in velodrome / Sayed Mojtaba Tabibian. Masters thesis, University of Malaya.

Seri Maulina, . (2014) Enhancement of eco-efficiency through life cycle assessment in natural rubber latex concentrate processing / Seri Maulina. PhD thesis, University of Malaya.

Seyed Reza, Besharati (2015) Design and manufacturing of a new CNC gantry machine with double motion feed drive system / Seyed Reza Besharati. PhD thesis, University of Malaya.

Seyed Sina , Sebtahmadi (2016) 12 sector dtc and pso-pi current control technics of z-source matrix converter for IM drive / Seyed Sina Sebtahmadi. PhD thesis, University of Malaya.

Seyed Vahid, Razavi Tosee (2012) Static and dynamic neural network modeling for reinforced concrete slab / Seyed Vahid Razavi Tosee. PhD thesis, University of Malaya.

Seyedeh Maryam , Hosseini (2017) Synthesis of nanofluid to improve heat transfer in annular concenteric heat exchanger /Seyedeh Maryam Hosseini. Masters thesis, University of Malaya.

Seyedsaeed , Tabatabaeikia (2016) Performance analysis of exhaust air energy recovery wind turbine / Seyedsaeed Tabatabaeikia. PhD thesis, University of Malaya.

Shafini, Mohd Shafie (2015) An integrated approach for techno-economic and environmental analysis of power generation from paddy residue in Malaysia / Shafini Mohd Shafie. PhD thesis, University of Malaya.

Shahid , Mehmood (2018) Synthesis and characterizations of Co3O4 based nanocomposite for electrochemical sensor applications / Shahid Mehmood. PhD thesis, University of Malaya.

Shahin, Mervat Hatem N. (2012) Palestinian diaspora entrepreneurship - a driving force in the knowledge economy / Mervat Hatem N. Shahin. PhD thesis, University of Malaya.

Shahrizal, Jaapar (2016) Summing methods procedures with selected analogue devices and digital plugins / Shahrizal Jaapar. Masters thesis, University of Malaya.

Shaikat, Debnath (2015) A density functional study on structural, electronic, chemical and optical properties of Ag-X, Al-X and Cu-X [X=Li, Na, K] nano-alloys for OPTO-electronic and catalytic applications / Shaikat Debnath. Masters thesis, University of Malaya.

Shamim, Azra (2015) Improving online decision making process based on the ranking of user reviews and product features / Azra Shamim. PhD thesis, University of Malaya.

Shamini, P. Janasekaran (2017) Welding of T-joint configuration between dissimilar metals using low powered fiber laser / Shamini P. Janasekaran. PhD thesis, University of Malaya.

Shanmuga Suntharam , Kittappa (2015) Synthesis and application of silica based mesoporous materials for removal of endocrine disrupting compounds in aqueous solution / Shanmuga Suntharam Kittappa. Masters thesis, University of Malaya.

Sharifah Fatmadiana , Wan Muhamad Hatta (2013) Probing technique for energy distribution of positive charges in gate dielectrics and its application to lifetime prediction / Sharifah Fatmadiana Wan Muhamad Hatta. PhD thesis, University of Malaya.

Shazia, Anis (2018) Design and development of portable scoliosis device for clinical testing /Shazia Anis. Masters thesis, University of Malaya.

Shervin, Motamedi (2016) Design, construction and monitoring of ecofriendly revetments for coastal protection / Shervin Motamedi. PhD thesis, University of Malaya.

Shima, Rahim Pouran (2016) Development and evaluation of niobium and molybdenum substituted magnetite catalysts for fenton-like treatment of recalcitrant wastewaters / Shima Rahim Pouran. PhD thesis, University of Malaya.

Shiu , Kai Ping (2017) Study of copper-aluminium high temperature die-attach material with different aluminium weight percentage /Shiu Kai Ping. Masters thesis, University of Malaya.

Shyrose, Wahid (2017) Development and characterisation of biodegradable electrospun polyhydroxybutyrate (PHB) / rice husk derived bioactive glass ceramic (RHBGC) composite scaffolds / Shyrose Wahid. Masters thesis, University of Malaya.

Sim, Hoi Yin (2013) Defect classification in reciprocating compressor using acoustic emission technique / Sim Hoi Yin. Masters thesis, University of Malaya.

Sim, Lan Ching (2015) Synthesis of solar and visible-light-active highly ordered titania nanotube arrays (TNTS) for photocatalytic applications / Sim Lan Ching. PhD thesis, University of Malaya.

Sinthamathi, Subramaniam (2003) Portal kelab pancing / Sinthamathi Subramaniam. Undergraduates thesis, University of Malaya.

Sisavanh, Suyavong (2013) Redesign of stone crushing plant system in Atlantic sand and gravel company / Sisavanh Suyavong. Masters thesis, University of Malaya.

Siti Asiah , Muhammad (2017) Seasonal impact on water quality and model development of a tropical urban river / Siti Asiah Muhammad. Masters thesis, University of Malaya.

Siti Halimah Tun Nisak, Mohd. Rukiban (2003) Sistem tutorial pintar / Siti Halimah Tun Nisak Mohd. Rukiban. Undergraduates thesis, University of Malaya.

Siti Khairani, Husain (2003) Sistem penilaian dan peperiksaan / Siti Khairani Husain. Undergraduates thesis, Universiti of Malaya.

Siti Mariam, Muhammad Abdul Basar (2017) Factors influencing students’ intention to utilize a web-based collaboration tool / Siti Mariam Muhammad Abdul Basar. PhD thesis, University of Malaya.

Siti Moliza, Muhammed (2001) Pakej belajar sembahyang bermultimedia / Siti Moliza Muhammed. Undergraduates thesis, University of Malaya.

Siti Nadhirah, Mohamed Hassan (2016) Multiwall carbon nanotube (MWCNT) as a saturable absorber for generation of high q-factor in erbium doped fiber laser (EDFL) / Siti Nadhirah Mohamed Hassan. Masters thesis, University of Malaya.

Siti Nurulain, Mohd Rum (2016) A metacognitive support environment for novice programmer using semantic web / Siti Nurulain Mohd Rum. PhD thesis, University of Malaya.

Siti Rusyida , Rohim (2017) The relationship between neck muscle strength and duration of computer work among women employees / Siti Rusyida Rohim. Masters thesis, University of Malaya.

Siti Salbiah , Samsudin (2012) Image stitching approach using minimum average correlation energy /Siti Salbiah Samsudin. Masters thesis, University of Malaya.

Siti Sara Seera , Mustapa Kamil (2013) Model test on the effects of some root properties on pullout capacity / Siti Sara Seera Mustapa Kamil. Masters thesis, University of Malaya.

Sivabalan , Tanapala (2013) The thermal performance study of biomass field-erected water tube boilers using analytical model / Sivabalan Tanapala. Masters thesis, Universiti Malaya.

Sk. Shezan , Arefin (2016) Performance analysis of solar-wind-diesel hybrid standalone renewable energy systems suitable for Malaysian climate / Sk. Shezan Arefin. Masters thesis, University of Malaya.

Sogol , Givehchi (2014) Control of magnetic particles in centrifugal microfludic platforms / Sogol Givehchi. Masters thesis, University of Malaya.

Soh, Wee Chen (2018) Formation of germanium oxynitride as buffer layer on germanium substrate / Soh Wee Chen. Masters thesis, University Of Malaya.

Somanaathan, Muthusamy (2018) Design and simulation of capacitive mems microphone for fully implantable cochlear implants / Somanaathan Muthusamy. Masters thesis, University of Malaya.

Somayeh, Nodehi (2016) Optical filters based on microfiber knot resonator structure / Somayeh Nodehi. PhD thesis, University of Malaya.

Somayeh, Sadeghi (2015) A keypoint based copy-move forgery detection and localization in digital images / Somayeh Sadeghi. PhD thesis, University of Malaya.

Soon, Foo Yew (2012) Characterization of pMosfet degradation in negative bias temperature instability test / Soon Foo Yew. Masters thesis, University of Malaya.

Soon, Ginny (2018) Surface modification of yttria-stabilised zirconia at nanoscale for in vitro study / Soon Ginny. PhD thesis, University of Malaya.

Soong, Ming Foong (2015) Application of inerter in passenger vehicle suspension systems / Soong Ming Foong. Masters thesis, University of Malaya.

Sree Rama Dasson, Velayudlan (2012) Nanofluid application in electric motor cooling / Sree Rama Dasson Velayudlan. Masters thesis, University of Malaya.

Subashini, Supramaniam (2013) Synthesis and characterization of manganese (IV) oxide nanowire via hydrothermal method / Subashini Supramaniam. Masters thesis, University of Malaya.

Suguna, Jeganathan (2019) Synthesis of hydroxyapatite from fish bone (scomber scombrus) using thermal decomposition method / Suguna Jeganathan. Masters thesis, University of Malaya.

Sulaiman, Ruhaizin (2015) Kitchen gas stove table top height from ergonomic perspective for elderly in Malaysia / Ruhaizin Sulaiman. PhD thesis, University of Malaya.

Suliana, Ali (2002) Sistem pakar dietari / Suliana Ali. Undergraduates thesis, University of Malaya.

Sunday, Albert Lawal (2013) Effect of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools / Sunday Albert Lawal. PhD thesis, University of Malaya.

Sunita, Harun (2017) Development of cutting tool through superplastic boronizing of duplex stainless steel /Sunita Harun. Masters thesis, University of Malaya.

Suraya, Ismail (2013) Analyzing coordination function within a governance structure: evidence from case studies of selected housing projects in Malaysia / Suraya Ismail. PhD thesis, University of Malaya.

Suriafazlin, Ismail (2012) Mechanical properties of ultra-high performance concrete containing silica fume /Suriafazlin Ismail. Masters thesis, University of Malaya.

Suriani , Ibrahim (2011) Synthesis and characterizations of novel solid polymer electrolytes with carbon nanotube as a filler / Suriani Ibrahim. Masters thesis, University of Malaya.

Suzana, Abu Bakar (2018) Reducing carbon footprint at a cement casting premise using cleaner production strategy / Suzana Abu Bakar. Masters thesis, University of Malaya.

Syafawati, Hasbi (2013) Indoor air quality and climate change impacts on air-conditioning and mechanical ventilation (ACMV) systems in commercial buildings in the tropics / Syafawati Hasbi. Masters thesis, University of Malaya.

Syahirah, Abd. Halim (2016) Design and evaluation of metal oxide surge arrester parameters for lightning over voltages / Syahirah Abd. Halim. PhD thesis, University of Malaya.

Syahyadi, Rizal (2012) Performance assessment of irrigation system using indicators for decision making / Rizal Syahyadi. Masters thesis, University of Malaya.

Syazwan Hanani, Meriam Suhaimy (2012) Synthesis and characterization of amorphous carbon nanotubes/copper oxide hybrid materials / Syazwan Hanani Meriam Suhaimy. Masters thesis, University of Malaya..

Syed Hassan , Abbas Jaffery (2017) Evaluation of electrical properties, oxidation and corrosion behavior of Fe and Bi added Sn-0.7 Cu lead-free solder alloy / Syed Hassan Abbas Jaffery. Masters thesis, University of Malaya.

Syed Mofachirul, Islam (2015) Performance of cement stabilised peat bricks / Syed Mofachirul Islam. Masters thesis, University of Malaya.

Syed Muzamil, Ahmed (2018) Heat transfer and frictional pressure drop of crop fiber suspensions in closed conduit flow and nanofluid flow in backward-facing step / Syed Muzamil Ahmed. Masters thesis, University of Malaya.

Syeda, Reham Shahed (2017) Oxidation and thermal stability enhancement of emulsified palm oil methyl ester in diesel engine /Syeda Reham Shahed. Masters thesis, University of Malaya.

Syufiqa Nurfatin, Rasid (2018) Effects of deformation process on residual stress and grain size of magnesium alloy ZK60 / Syufiqa Nurfatin Rasid. Masters thesis, University of Malaya.

T

Tahan Latibari, Sara (2016) Encapsulation of organic phase change materials within metal oxides for thermal energy storage systems / Sara Tahan Latibari. PhD thesis, University of Malaya.

Taher Muhammad, Ali (2013) Query proof structure caching for incremental evaluation of tabled prolog programs / Taher Muhammad Ali. PhD thesis, University of Malaya.

Talebian, Seyed Hamid (2013) Investigation of evolutionary multi-objective algorithms in solving view selection problem / Seyed Hamid Talebian. PhD thesis, University of Malaya.

Tam, Jun Hao (2018) A comparison study for active chilled beam and variable air volume systems for an office building / Tam Jun Hao. Masters thesis, University of Malaya.

Tam, Jun Hui (2018) Identification of elastic properties of composite plates using non-destructive two stages derivative based method and meta-heuristic hybrid optimization method / Tam Jun Hui. PhD thesis, University of Malaya.

Tamjidyamcholo, Alireza (2014) Evaluation model for knowledge sharing in information security professional virtual community / Alireza Tamjidyamcholo. PhD thesis, University of Malaya.

Tan, Chee Heng (2014) Secure hardware resource monitoring, usage optimization and affirmation for database operations in virtualized cloud environment / Tan Chee Heng. PhD thesis, University Malaya.

Tan, Jian Ding (2017) An improved electromagnetism-like mechanism algorithm for the optimization of maximum power point tracking / Tan Jian Ding. PhD thesis, University of Malaya.

Tan, Jih Haur (2002) Computer aided learning for chinese phonetics / Tan Jih Haur. Undergraduates thesis, University of Malaya.

Tan, Kien Peng (2005) Grid application / Tan Kien Peng. Undergraduates thesis, University of Malaya.

Tan, Kim Han (2012) Synthesis and characterizations of amorphous carbon nanotubes/cadmium selenide quantum dots hybrid materials / Tan Kim Han. Masters thesis, University of Malaya.

Tan, Li Kuo (2018) Fully automated segmentation of the left ventricle in cine cardiac magnetic resonance imaging / Tan Li Kuo. PhD thesis, University of Malaya.

Tan, Say Min (2012) Preparation and characterization of PEO-PMMA-LiCIO[4]-EC-MnO[2] nanocomposite polymer electrolytes / Tan Say Min. Masters thesis, University of Malaya.

Tan, Shyh Mee (2014) School librarians’ readiness for information literacy implementation in secondary schools / Tan Shyh Mee. PhD thesis, University of Malaya.

Tan, Soon Sien (2016) Effect of sintering profile on the densification behaviour of forsterite ceramics /Tan Soon Sien. Masters thesis, University of Malaya.

Tan, Tat San (2001) Sistem pengendalian @ penyelenggaraan kenderaan UM / Tan Tat San. Undergraduates thesis, University of Malaya.

Tan , Hean Giap (2001) Web based agent for promotion of mercantile - company management / Tan Hean Giap. Undergraduates thesis, University of Malaya.

Tan , Lai Yen (2005) E-Appraisal system / Tan Lai Yen. Undergraduates thesis, University of Malaya.

Tang, Chee Kuang (2017) Development of antimicrobial composite films of chitin nanofiber reinforced chitosan containing silver salt / Tang Chee Kuang. Masters thesis, University of Malaya.

Taposh, Roy (2014) Investigating the effect of micro-dimpling surface texture on ceramic-on-ceramic hip joints / Taposh Roy. Masters thesis, Universiti of Malaya.

Tawsif, Ahmed Siddique (2016) Synthesis and characterization of secondary and ternary ammonium based protic ionic liquids for thermoelectrical cell /Tawsif Ahmed Siddique. Masters thesis, University of Malaya.

Tee, Yun Lu (2018) Dynamic characteristics of filled natural rubber for earthquake energy applications / Tee Yun Lu. Masters thesis, University of Malaya.

Teh, Seoh Hian (2013) Synthesis and characterization of electrodeposited nanocrystalline ferromagnetic cobalt-iron-platinum alloy films / Teh Seoh Hian. PhD thesis, University of Malaya.

Teuku Meurah, Indra Riayatsyah (2018) Techno-economics analysis of biodiesel production from non-edible Reutealis trisperma oil / Teuku Meurah Indra Riayatsyah. Masters thesis, Universiti Malaya.

Tey, Yong Yuen (2017) Design of an ultra wideband low noise amplifier for cognitive radio applications / Tey Yong Yuen. Masters thesis, University of Malaya.

Tey , Su Lin (2001) Sistem Pengurusan Inventori Perisian / Tey Su Lin. Undergraduates thesis, University of Malaya.

Tham, Chi Meng (2011) Effect of nanofluid-based absorbers on direct solar collector / Tham Chi Meng. Masters thesis, University of Malaya.

Tham, Mau Luen (2015) Ber-driven resource allocation for multimedia communication over downlink OFDMA networks / Tham Mau Luen. PhD thesis, University of Malaya.

Thamil Selvam, Kanniah (2018) Conceptual design of universal wireless navigation system in public amenities (internal facility) for physically blind people (disabled) / Thamil Selvam Kanniah. Masters thesis, University of Malaya.

Thavamalar, Krishnasamy (2018) Green initiatives for mass rapid transit project in Malaysia / Thavamalar Krishnasamy. Masters thesis, University of Malaya.

Tiong, Khing Gueok (2015) Adsorption studies of methylene blue using selected agro-wastes as low cost adsorbents / Tiong Khing Gueok. Masters thesis, University of Malaya.

Tirad, Mohammed Aref Almalahmeh (2014) Semantic recommender system for Malaysian tourism industry / Tirad Mohammed Aref Almalahmeh. PhD thesis, University Malaya.

Tofael, Ahmed (2018) Future grid expansion planning towards cost-effective and sustainable ASEAN power grid development / Tofael Ahmed. PhD thesis, University of Malaya.

Too, Sea Chen (2003) UMTS Core Network Simulator / Too Sea Chen. Undergraduates thesis, University of Malaya.

Torghabeh, Saeid Abolfazli (2014) A lightweight mobile cloud computing framework for resource-intensive mobile application / Saeid Abolfazli Torghabeh. PhD thesis, University Malaya.

Tuan Ahmad Fauzi, Tuan Abdullah (2017) Optimization of electrical wiring design in buildings using particle swarm optimization and genetic algorithm / Tuan Ahmad Fauzi Tuan Abdullah. Masters thesis, University of Malaya.

U

Uma Mageswary, K. Munusamy (2017) Ergonomic facilities in special education school / Uma Mageswary K. Munusamy. Masters thesis, University of Malaya.

Umar, Roslan (2014) Radio frequency interference (RFI) mapping for radio astronomy in Peninsular Malaysia / Roslan Umar. PhD thesis, University of Malaya.

Umawathy , Techanamurthy (2018) Development of a flipped classroom module based on problem-solving of culinary arts for community colleges / Umawathy Techanamurthy. PhD thesis, University of Malaya.

V

Vahid, Goodarzy (2016) Numerical relation and 3D modelling of human head balance factors / Vahid Goodarzy. Masters thesis, University of Malaya.

Vala Ali, Rohani (2014) Content-based recommender system for an academic social network / Vala Ali Rohani. PhD thesis, University of Malaya.

Vela, Lai Kin Ming (2017) Hierarchical based integrated dust management system in a cement manufacturing plant in Malaysia / Vela Lai Kin Ming. Masters thesis, University of Malaya.

Vicneswaran, Arumugam (2013) Synthesis and characterization of manganese (IV) oxide - multiwalled carbon nano tubes (MWCNT) composite via solid-state technique / Vicneswaran Arumugam. Masters thesis, University of Malaya.

Vijeta, Khare (2016) Detection of multi-oriented moving text in videos / Vijeta Khare. PhD thesis, University of Malaya.

Vikneswaran, Padasivam (2017) Corrosion effect of ceiba pentandra blends with commercial diesel on aluminium alloys / Vikneswaran Padasivam. Masters thesis, University of Malaya.

Vikneswaran, Veerasamy (2004) Intelligent map guider / Vikneswaran Veerasamy. Undergraduates thesis, University of Malaya.

Viniita, K.K.Vasu (2003) The gender disaggregated database information system (GDDIS) / Viniita K.K.Vasu. Undergraduates thesis, University of Malaya.

Vinod Khanna Nair, Kuncheekanna (2013) A comparison of occupant thermal comfort between a green building and a conventional building in the Tropics / Vinod Khanna Nair Kuncheekanna. Masters thesis, University of Malaya.

Visnu Varatan, Arumugham (2018) Optimal control of information in social network using pontryagin's maximum/minimum principle / Visnu Varatan Arumugham. Masters thesis, University of Malaya.

Viyapuri, Rubentheren (2016) Development of chitosan based nanocomposite film for the wing membrane of biomimetic micro air vehicles (BMAV) / Rubentheren Viyapuri. PhD thesis, University of Malaya.

W

Wan Ahliah, Wan Ismail (2016) Development of sol gel for uv and antibacterial protection / Wan Ahliah Bt Wan Ismail. PhD thesis, University of Malaya.

Wan Khairul Muzammil, Abdul Rahim (2012) Numerical analysis of phase change material for energy storage system / Wan Khairul Muzammil Abdul Rahim. Masters thesis, University of Malaya.

Wan Maimun, Wan Abdullah (2010) Critical factors in project success: a study of public sector construction projects in Malaysia / Wan Maimun Wan Abdullah. PhD thesis, University of Malay.

Wan Maria , Wan Osman (2001) Aplikasi wayarles menggunakan telefon bimbit dengan-WAP / Wan Maria Wan Osman. Undergraduates thesis, University of Malaya.

Wan Naimah, Wan Ab Naim (2018) Characterization of the efficacy of stent graft treatment in patients with aortic dissection using computational fluid dynamics analysis / Wan Naimah Wan Ab Naim. PhD thesis, University of Malaya.

Wan Norasmira , Wan Ismail (2001) Laman Web Penyelaras-Penyelaras Pusat Sumber Sekolah Di Malaysia / Wan Norasmira Wan Ismail. Undergraduates thesis, University of Malaya.

Wan Norhasiah, Wan Bidin (2017) Full scale testing of precast beam to column connection using billet connector and beam half joint subjected to reversible loading / Wan Norhasiah Wan Bidin. Masters thesis, University of Malaya.

Wan Nur Atikah , Haji Wan Nafi (2017) Corrosion behaviour of poly-l-lactic acid coated magnesium by electrospinning / Wan Nur Atikah Haji Wan Nafi. Masters thesis, University of Malaya.

Wan Nurlina, Wan Yahya (2012) Study on effects of surface modification on poly(Methyl Methacrylate) (PMMA) surface / Wan Nurlina Wan Yahya. Masters thesis, University of Malaya.

Wan Zuraiha, Wan Zakaria (2003) Sistem sokongan projek ilmiah / Wan Zuraiha Wan Zakaria. Undergraduates thesis, University of Malaya.

Wang, Ying (2018) Properties and effects of crosslinked polymer on starch and polyactic acid blend / Wang Ying. Masters thesis, University Of Malaya.

Wang , Keng Kuen (2003) An intelligent tool for converting prolog problems into prolog codes / Wang Keng Kuen. Undergraduates thesis, University of Malaya.

Wee, Wei Hong (2017) Development of particle maipulation and analysis tool for microfluidic device using dielectrophoresis / Wee Wei Hong. PhD thesis, Universiti Malaya.

Wong, Chee Sum (2001) Development of object-oriented components for atm network simulation with emphasis on schedule policies in traffic shaping / Wong Chee Sum. Undergraduates thesis, University of Malaya.

Wong, Jee Keen Raymond (2016) Partial discharge classification on xlpe cable joints under different noise levels using artificial intelligence techniques / Wong Jee Keen Raymond. PhD thesis, University of Malaya.

Wong, Kok Hoe (2013) The design and flow simulation of a power-augmented shroud for urban wind turbine system / Wong Kok Hoe. Masters thesis, University of Malaya.

Wong, Siau Dhing (2013) Suspension of concentrated fine particles with novel axial and radial impellers / Wong Siau Dhing. Masters thesis, University of Malaya.

Y

Yanusiya, Argenan (2017) Work-related musculoskeletal disorders (WMSDs) among teachers and student's management assistants in special education schools in Malaysia / Yanusiya Argenan. Masters thesis, University of Malaya.

Yap, Jiazhen (2017) Economic dispatch considering of electric vehicle in power system network / Yap Jiazhen. Masters thesis, University of Malaya.

Yasir Mohammed , Abdulqader Al-Saffar (2012) Effect of changing the frequency of biaxial loading on chondrocytes seeded in agarose gel / Yasir Mohammed Abdulqader Al-Saffar. Masters thesis, University of Malaya.

Yasotha, Kanesan (2013) An analysis of questions and responses in gotcha calls / Yasotha A/P Kanesan. Masters thesis, University of Malaya.

Yasser, Mohamed Arifin (2006) Report generation tool / Yasser Mohamed Arifin. Undergraduates thesis, University of Malaya.

Yazdi, Saeed Reza Aghabozorgi Sahaf (2013) Clustering of large time-series datasets using a multi-step approach / Saeed Reza Aghabozorgi Sahaf Yazdi. PhD thesis, University of Malaya.

Yessi, Jusman (2016) Computer-aided screening system for cervical precancerous cells based on field emission scanning electron microscopy and energy dispersive x-ray / Yessi Jusman. PhD thesis, University of Malaya.

Yew, Chee Hong @ Takahiro (2018) Paper based lateral flow biosensor for detection of contaminant and infection / Yew Chee Hong @ Takahiro. Masters thesis, University of Malaya.

Yew, Ming Kun (2012) Mechanical properties and impact resistance of hybrid fibre-reinforced high strength concrete / Yew Ming Kun. Masters thesis, University of Malaya.

Yew, Wan Tian (2017) Seabed scour induced by twin-propeller ships / Yew Wan Tian. PhD thesis, University of Malaya.

Yim, Yan Han (2018) Reclamation of industry wastewater as a renewable source for cooling water system: A case study for a semiconductor plant / Yim Yan Han. Masters thesis, University of Malaya.

Yong, Xin Yi (2005) A brain-computer interface to control a prosthetic hand / Yong Xin Yi. Masters thesis, University of Malaya.

Yong, Yan Ling (2018) Linear regression convolutional neural network for fully automated coronary lumen segmentation in intravascular optical coherence tomography / Yong Yan Yin. Masters thesis, University of Malaya.

Yoon, Li Wan (2015) Production of cellulase and ethanol using pretreated sugarcane bagasse via an in situ saccharification and fermentation system / Yoon Li Wan. PhD thesis, University of Malaya.

Yu, Yong Poh (2016) Dynamic heart rate estimation using facial images from video sequences / Yu Yong Poh. PhD thesis, University of Malaya.

Yves Paul, Vincent Mbous (2017) Profiling the cytotoxicity of deep eutectic solvent systems and their potential applications as anticancer agents / Yves Paul Vincent Mbous. Masters thesis, University of Malaya.

Z

Zahra, Kalantar (2012) Properties of bituminous mix and binder modified with waste polyethylene terephthalate / Zahra Kalantar. Masters thesis, University of Malaya.

Zahri, Ramlan (2017) Reka bentuk modul latihan perkembangan profesional guru dalam persekitaran pembelajaran maya / Zahri Ramlan. PhD thesis, University of Malaya.

Zaid, Najid (2015) Investigation of firefly algorithm and chaos firefly algorithm for load prequency control / Zaid Najid. Masters thesis, University of Malaya.

Zaidi, Razak (2016) Old Jawi manuscript: digital recognition / Zaidi Razak. PhD thesis, University of Malaya.

Zakariah, Abdullah (2012) Technological capability building through backward linkages in the Malaysian petrochemical industry / Zakariah Abdullah. PhD thesis, University of Malaya.

Zare, Mohammad Reza (2013) Intelligent methods for automatic classification of medical images / Mohammad Reza Zare. PhD thesis, University of Malaya.

Zavareh, Adeleh Asemi (2014) Fuzzy dynamic hybrid MCDM method for supplier evaluation and selection / Adeleh Asemi Zavareh. PhD thesis, University of Malaya.

Zeyad Abdullateef, Ibraheem Al-Dabagh (2018) Antimony telluride as a saturable absorber for generating Q-Switched and mode-locked Erbium-Doped Fiber Lasers / Zeyad Abdullateef Ibraheem Al-Dabagh. Masters thesis, University of Malaya.

Zhang, Xinyu (2018) Pattern recognition for magnetic resonance knee imaging using convolutional neural network / Zhang Xinyu. Masters thesis, University of Malaya.

Zhou, Ding (2017) Stress intensity factors for embedded cracks within torsionally loaded square prismatic bars / Zhou Ding. Masters thesis, University of Malaya.

Zhuang, Yuan (2018) Iris recognition using convolutional neural network / Zhuang Yuan. Masters thesis, University of Malaya.

Zulkarnain, Endut (2013) Synthesis and characterization of anodic titania nanotubes for supercapacitor application / Zulkarnain Endut. PhD thesis, University of Malaya.

This list was generated on Fri Sep 20 08:53:40 2019 MYT.